Account Putting Search Results

How To: Do a cute hairstyle on American Girl with medium hair

In this tutorial, we learn how to do a cute hairstyle on American Girl with medium hair. This is great for a doll that has hair that flips out at the bottom or hair that is curly. First, you will take most of the hair, except for a thin layer of hair on the underneath area. Put a rubber band around this part of the hair, then put a hole with your finger above the band. Flip the hair through this, so the hair is sticking up. Then, curl the hair under and clip it into place on the back to finis...

How To: Remove ink stains from your American Girl doll

In this video, we learn how to remove ink stains from your American Girl doll. If you get ink marks on your doll it's pretty easy to get off with just some Oxy spot treatment clear. The main ingredient in it is Benzyl Peroxide, which is an acne medicine. After you have this, you will put a little bit of it onto the stain on the doll. Apply this using a Q-Tip and not your finger, to avoid oils. Press this all over the spots on your doll, then cover the spots with plastic wrap. Put the doll in ...

How To: Do wrapped pigtails on your American Girl doll

In this video, we learn how to do wrapped pigtails on your American Girl doll. First, separate the hair from side to side. Then, take a small section from the front of the hair and put it aside. After this, you will need to comb the hair back into a ponytail and secure with a rubber band. Secure the other side into a ponytail as well, but put all the hair back into it. After this, you will take the front from the other side and wrap it around the ponytail. Clip it into place and then you will...

How To: Change a flat BMX tire

In this tutorial, we learn how to change a flat BMX tire. First, take the wheel off with a wrench. Then, let all the air out of the tire if it's not already completely out. Next, find what gave you the flat tire and make sure you remove it from the tire. After this, grab the top of the tire and pull it off of the wheel. If it's completely flat, it should be easy to take off from the rim. Work your way around until it's completely off. Then, put the new tire on and then pump it with air. After...

How To: Ride a skateboard

In this tutorial, we learn how to ride a skateboard. First, you want to look at the board and find where the bolts are. After this, you will put your feet where the bolts are and stand on the board. Get your balance together while standing on the board. After this, you can use one of your feet to push you and then put it back on the board to continue to ride on a smooth surface. If you need more momentum, use your feet again to help you push. Once you find your balance and can ride normally, ...

How To: Make shtf bread

In this video, we learn how to make shtf bread. To make this you will need: 5 c fresh ground wheat flour, 2 c 100 degree water, 1/3 c sugar, 1/3 c honey, 3 tsp salt, 3 tbsp olive oil, and 4 tsp yeast. To start, you will put some of the water in a bowl with the yeast, then let it react. From here, add in the rest of the ingredients to another bowl, except the flour, and mix together. After this, add in the flour and the yeast mixture. Now, put into the bread machine. Let this bake for 30 minut...

How To: Strop on a stropping block

In this video, we learn how to strop on a stropping block. There are two layers to the strop and they measure different lengths. On the bottom you should put two mouse pads to make sure it stays put. Now, charge the strop with a stropping compound and rubbing it against the grain until it flakes off. Next, gauge the angle of your knife and place the blade against the strop. Push against the edge of the blade and work from the top to the bottom in a long and slow arch. This is all there is to ...

How To: Cut monitor feedback with StudioLive 16.4.2

In this video, Rick show us how to cut monitor feedback with StudioLive 16.4.2. First, assign your microphone to ox 1. Then turn it up and go to the master output of Ox 1 and turn it up until you hear feedback happening. Then, hit the select button on Ox 1 and you can change the compression for any channel. Take out low rumble by putting the low band on and putting it in shelf mode. This will create a high pass filter. Take out frequencies below 130 hertz and then go back to ox 1 master and t...

How To: Decorate your Christmas tree like a pro

In this tutorial, we learn how to decorate your Christmas tree like a pro. Before you do anything else, put something together that is going to look good that you can place in your tree. Put in different types of flowers, bushes, and garland to make a pretty piece to place inside of your tree. Once you do this, you can shape the branches in the tree around this, then continue to place the elements from the main piece all around the rest of the tree. Add in a long string of matching ornaments,...

How To: Compose a hip hop beat in Fruity Loops

In this video we learn how to compose a hip hop beat in Fruity Loops. First, go to the website www.class4beats.com and download all the samples and plugins. Once you have these downloaded you can use them in Fruity Loops. Play around with the different sounds that you have in this and then put a new beat together. Once you have a beat put together, change it to a hip hope type of beat and then add it in with a melody for a new sound. This will make a great hip hop beat that is all your own an...

How To: Properly remove a freewheel

In this video we learn how to properly remove a freewheel with Sasha. First, remove the skewer and then put the end back on. Now, identify the proper tool to remove the free wheel. Use the type of remover for your wheel, then place it over the axle and slide it in. Then, take the skewer, replace it, and slide it in tightly. Now grab a wrench and turn it counter clockwise to take the freewheel off. Once you are finished, your freewheel will be removed and you can clean it or use it how you'd l...

How To: Get a bigger butt using two chairs

In this tutorial, we learn how to get a bigger butt using two chairs. First, stand in between the two chairs and put your hands on the chair in front of you. After this, put your foot on the back chair and squat down, placing your back knee on the ground. Your other leg should be out in front of you. Do not let your knee go over your toes as you are squatting down. Go down as far as you can without your heels coming off of the ground. Do this right and you will get a bigger butt in no time an...

How To: Derive and use the slope formula

In this video, we learn how to derive and use the slop formula. The slope of a line is equal to change in y divided by the change in x. First, put the first point on the coordinate point. Then, represent the X and Y by X1 and Y1. Then, put the second point on the plane, representing the coordinates with X2 and Y2. Now, with these two points, draw a straight line and derive the formula from here. The change in X will be from X1 to X2. Now, replace that with the change in X and do the same for ...

How To: Make a ferro fluid

In this video, we learn how to make Ferro fluid. This is a magnetic fluid that you can easily make at home. To do this, you will need: laser jet toner, rare earth magnet, and some vegetable oil. Now, pour the toner into a cup (50 ml), then put 2 tbs of vegetable oil into this cup as well and stir it together until you have a thin consistency. Now, transfer into a smaller jar so you can handle it easier. Now test this fluid by taking the earth magnet and putting it to the bottom of the jar. No...

How To: Clip curves when sewing with rounded seams or edges

In this tutorial, we learn how to clip curves when sewing with rounded seams or edges. First, you will take your piece of clothing, then grab your scissors. Put the edge of the clothing (with the seam) and lay it flat. Then, put the scissors onto the seams with the very back of the scissors over the fabric. Clip close to the seam, but do not clip through the seam as you are cutting. Once you are finished, you will be able to sew in curves and will be able to easily get around the seams withou...

How To: Protect the ball while in the box

In this video, we learn how to protect the ball while in the box. If the ball is directly in front of your body, it puts it in a position where it can be moved by the defender. The box is an imaginary line just under your chin that goes just under your thigh and from the length of your torso. The ball should be on the top corner of the box when you shoot, where you can cross is around your face before you put it down. You can also sway it around your knees if you are ready to take off on a dr...

How To: Style natural curls

In this tutorial, we learn how to style natural curls. First, spray some water in your hair all over the place so it's just damp but not completely wet. After this, you will need to put the moisture back in the tips of your hair so it's healthier. To do this, you will need to use any moisturizer that works with your hair type and gently work it into the tips of your hair after working into the palms of your hands. Also put this in the underneath section of your head and then work through the ...

How To: Make verdigris with copper and vinegar

In this tutorial, we learn how to make verdigris with copper and vinegar. Verdigris is a compound of copper that is blue and powder. You will need: copper metal, vinegar, a big jug, and a small beaker. Now, place the small beaker inside of the jar, then fill the bottom with vinegar. Next, put the piece of copper metal inside of the jar making sure it sits inside the small beaker. Seal this and put it in a safe and dry place. Leave it for a good month, then when you come back you will have a n...

How To: Change a mountain bike tire

In this video, we learn how to change a mountain bike tire. Start by shifting the rear cassette to the smallest gear. Then, remove quick release and remove the wheel. After this, remove the tire with tire levers or strong fingers, then check inside the tire rim for foreign objects. Inflate the new tube slightly, then put the tire in. Put both of these inside the rim, then inflate the tire to the correct PSI. After this, install the wheel on the bike and then tighten quick release. Do the fina...

How To: Change strings on the erhu

In this video, we learn how to change the strings on the erhu. First, loosen and remove the inner string. After this, take and unwind the new inner string. Then, take the end with the loop and put it through the Qianjing. Then, loop it in the screw at the bottom of the erhu. Then fold the tip of the other end of the string and put it through the hole in the first peg. Then, loop the string one and push the tip into the hole. Now turn the peg clockwise to tighten it. Repeat this for all the st...

How To: Install RAM in a 13" MacBook Pro

You can change your RAM in a 13" MacBook Pro. To do this you need a screw driver and a new ram. So first put your notebook on the table and take all the screws out of the notebook but be careful when doing this. Now place your fingers on top and the bottom and leisurely take out the back cover. Now there are two slots located at the right side and you have to push it out to remove the old rams. Now take the new ram and make sure you put it as the video showing and place it where you removed t...

How To: Add more gestures to your trackpad for fast browsing

In this video, we learn how to add more gestures to your track pad for fast browsing. To get these gestures, you will first need to go to the website jitouch, where you can download their software and watch videos on how to use different gestures. The first gesture is great for while using browsers, to scroll between tabs quickly. You just have to use two fingers, putting the middle one on first, then swiping the other. Another gesture is to open a link in a new tab, just put one finger on th...

How To: Play "Never Say Never" by The Fray on guitar

In this video, we learn how to play "Never Say Never" by The Fray on guitar. The verse for this song is: G, D, Em, Em, Cadd9, Cadd9, G, D/F#. Then, the chorus is: G, Bm, Em, Cadd9. The bridge is: Am, Em, D, Am, Em, D, Cadd9. Play these separately and master them before you start to put the entire song together. After you do this, start to add in the lyrics to each section so you can figure out where the words go while singing with the different chords. Once you have each section finished, sta...

How To: Pull some easy household pranks on your spouse, child, or parent

This video made by a loving wife while her husband is at work outlines three fun, safe, easy ways for families to prank each other without risking damage, injury, or rage. She starts by taping the laser on the bottom of her husband's mouse so it won't work. Then shut puts toothpaste under the light switches in dark rooms so that her hubby will get a sticky finger when he turns on the lights. Lastly, she put flour on the inside of his beloved window fan so that it will shoot out when he turns ...

How To: Play practical jokes using your guitar

In this video, we learn how to play practical jokes using your guitar. The first trick is called the jack in the box. First, take your pick and put it in between your strings and slide it down. Then, put your hand over it and play the jack in the box song. The next trick is to give the illusion you are tuning your guitar in the middle of a song. You will cover your fingers with your forearm to give the appearance and play with your other hand to make it look like it's being tuned. The last tr...

How To: Get infants and toddlers to sleep

Dr. Jodi Mindell teaches us how to get infants and toddlers to sleep. Night wakings are normal, all infants and toddlers will wake between 6-10 times at night. Self soothers will put themselves right back to sleeps and the others will wake someone up to put them to bed. To have a child more likely to become a self soother, then have them go to bed by themselves instead of rocking themselves to sleep. Refusal for children to go to bed is normal, but the child needs to learn how to fall asleep ...

How To: Add netting to flower pin

In this video, we learn how to add netting a flower pin. Once you have already out your flower together, put a pin in the back so you can clip it to your clothing. Now, purchase netting from a craft store and cut out a small rectangle. Now, fold this piece up in half and then in half once more. Now, make a triangle at the bottom and open up the flower. Find a place to put the netting in, then apply hot glue inside and use a craft pencil to push the netting into the glue. Do this a couple more...

How To: Distress patterned paper

Crinkle top part and go over it with distress ink. Do edges front and back. Put extra ink on scallops. Spray with mustard seed and tattered jewels, olive vine and pine cone to add color. Place paper on pocket and iron on both sides. Spray with iridescent gold. Use brush to spread out. Iron again on both sides. This process makes it look aged. Take a film strip and spray with tattered leather. You want to use an iron when spraying grunge board with tattered jewels because it will make it seep ...

How To: Fix a stickly RV slideout

If you own an RV and are having a hard time with putting your slideout back, then this next video tutorial may help. In the video, The RV Doctor talks about possible reasons why a slideout may be so hard to put back in after it was easy to take out. There are a couple of reasons for it, and the video describes what kind of problems you may be facing and what you may need to do. So good luck, be safe, and enjoy!

How To: Make Moroccan lamb, apricot and ground almond stew

In this tutorial, we learn how to make Moroccan lamb, apricot and ground almond stew. First, put olive oil inside of a pan and wait until it gets hot, then place lamb inside and let it brown. Next, take these out and set aside, then add in 1 c chopped onions and 1 tbsp garlic to the pan the meat was just in. Cook this for five minutes, then add in the meat and juices back to the pot. Now, add in chicken stock to fill the pot, then add in a bit of salt. Next, add in orange zest, orange juice, ...

How To: Put videos on your iPod touch using KeepVid software

In this video, we learn how to put videos on your iPod touch using KeepVid software. First, go online to KeepVid, then download and install this to our computer. After you do this, connect your device to your computer and open up iTunes. Now, go to the movies section of iTunes and drag your video into the movie section from your desktop. Now, the software will process and you will be bale to rename it. After this, sync your iPod with your iTunes and you will be able to access the movie right ...

How To: Change a bike tire with a quick release wheel

In this tutorial, we learn how to change a bike tire with a quick release wheel. First, put your chain down and release your brake. Now, take your wheel off and then pull the tire off. Now, take the tube off by using the tire lever and pushing away from you. Don't hurt your fingers on the spikes. After you pull the tubing off, put the new tire back onto the rim by rolling it on with your fingers. Place the tubing around the tire after this, and inflate it. Now, place the wheel back onto the b...

How To: Set up your R4 card without the setup disk

This video tutorial is in the Video Games category where you will learn how to set up your R4 card without the setup disk. If you get the message 'couldn't find DS menu' on your DS, take out your micro SD card and plug it in to your computer. Then you will get a window with a 'this folder is empty' message. Right click on the icon and click on 'extract R4 DS set up'. Now open up the set up folder and copy and paste everything in this folder in to the 1st window. You can then delete the set up...

How To: Properly get 360 waves

In this video, we learn how to properly get 360 waves. First, turn your water on so it gets hot, then put it onto your hair with your hands or a spray bottle. Next, use a shower brush to brush your hair thoroughly on all sides. After this, put some lotion on your hand and rub your hands together, then rub into your hair. After this, use the brush on your hair brushing diagonally and from side to side. Next, apply a small amount of oil to your hair, then comb through once more. When finished, ...

How To: Put an iPhone into recovery mode after using ziPhone

In this video tutorial, viewers learn how to put their iPod device into recovery mode using Z-Phone. The Z-phone application does not work on 1st generation iPod devices. Begin by unplugging the device from your computer. Then hold down the power and center button until the device\s screen goes completely black. Now hold the center button as you connect the device back to your computer. Finish by following the process in iTunes to restore the device. This video will benefit those viewers who ...