Air Conditioners Search Results

How To: Help your RV water heater run more efficiently

RV water heaters can be easily made more efficient by loosening one or two screws that hold the U-tube tight. Sometimes the orifice that connects the gas valve and the U-tube is not aligned properly with the U-tube, and the loosening of one screw or the other will allow the straight alignment of the orifice and U-tube. After loosening the screws and realigning the U-tube, simply tighten the screw and the water heater will be more efficient because the perfect gas and air mixture will be present.

How To: Clean gold jewelry

Looking to polish up some old jewelry? Your skin, soap, and even the air can dull your gold jewelry. Bring the luster back with a few household items and these five steps.

How To: Practice your first kiss

Love is in the air, but there's one thing—you don't know how to kiss. Well, don't worry—everybody feels the pressure during a first kiss, but some deal with it better than others. That's mainly because they practice beforehand, getting every possible maneuver down with their lips to make it a pleasurable experience. And this isn't just for your benefit, the kisser, but for the receiver of the kiss, as well. Do you really want your first kiss to be a granny kiss on the cheek? No? Then pay atte...

How To: Make and use a pop filter to record audio

Check out this instructional podcast video that demonstrates how to use the pop filter or pop shield to record audio. A pop filter helps control your voice while recording it. It's a little device that goes between you and the microphone to eliminate the air in your voice so your voice is recorded accurately. This tutorial contains step by step video instructions that will help you make a pop filter. Record better sound quality by learning how to make a pop filter.

How To: Do a heelflip on a skateboard

Heel flip is a skateboard trick similar to a Kick flip. Get expert tips and advice on skateboard decks and trucks in this video tutorial. Take action: know how to do an ollie, know how to do a kickflip, do an ollie, extend lead foot past front of board, and once in the air, extend front foot to flip board land cleanly. Shawn, the instructor in this how-to video from Live Strong, has over twenty years of skateboarding knowledge. He has appeared in Slap, Thrasher and Transworld magazines and hi...

How To: Produce a resonant sound with the flute

Many young players have a too tight, smile embouchure with the flute high on their lip and the hole almost entirely covered. Some were initially taught the coke-bottle method of blowing straight across the hole. This video addresses these common problems that many flutists have. This flute playing method is based on the techings of Bradley Garner, who teaches the lower roll out into the flute technique. The angling the air toward the crown idea was taught by Alain Marion. It may feel very str...

How To: Watercool a PC

If you've never dabbled in water cooling, it's all about removing heat from the components in your PC using water instead of air–although instead of having a "cooling jacket" designed into the engine block, you attach a waterblock to the component you want to cool on your motherboard (or GPU, HD, memory, etc) in place of a heatsink, along with a set of tubes, a heat exchanger (i.e., radiator) along with a pump to move your coolant. In this video, you'll learn the fundamentals of watercooling ...

How To: Make an aquarium with a USB powered LED light

This is a video tutorial on how to make a USB aquarium powered by a under-gravel LED bulb that is powered by a USB port. With a bit of simple engineering, build a circuit to provide elegant lighting to your aquarium. Connect the wiring to the air pump for a cool lighted bubble effect. Plus, it's powered by your computer! Don't use expensive fish, or those which are sensitive to DC Currents. Don't do this project in a saline water tank, because salt conducts more electricity.

How To: Cast an RTV mold

This animation shows the various steps taken when creating an RTV mold. First, risers are put on the part to allow air to escape from the final mold. A thin film is attached to the part, which will act as a seam for the final mold. A box is built around the entire structure, and it is filled with silicone rubber. Once the rubber has cured, the box and risers are removed, the mold is opened at its seam, and the original part is removed. Any type of urethane can now be injected in the mold to c...

How To: Execute a butterfly twist

Take a look at this instructional video and learn how to perform the impressive looking butterfly twist. You may have seen this move performed in various martial arts movies. This acrobatic technique is simple to perform. The first dip is crucial. After you dip, your head will be facing the other direction and as you jump, you essentially hug yourself and spin in the air before landing on your feet. Sounds complex? Check this tutorial out.

How To: Do the Teaser pilates exercise

The Teaser is a very challenging original pilates exercise that involves abdominal strength, core strength, balance and coordination. To make learning the Teasers easier, this Teaser starts with the legs in the air, roll up to Teaser position using abdominal strength, balance at the top and roll down with control. The Teaser strengthens your core, flattens your abs and make you feel really great when you get it. Watch this fitness how to video and you'll be toning your body with pilates in no...

How To: Paint a radio controlled vehicle shell

This video will walk you through the beginning to end on painting a RC (radio controlled) vehicle shell. Everything that you need to know on how to paint a shell is on here, from shaker cans (spray paint) to airbrushes. I use a Iwata by the way and a harbor freight air compressor. The paint used in this is Pactra silver and black. The airbrush paint is Spaz Stix candy apple green, blue, dark blue, and white. The lightning effect came out pretty well in my opinion, but you be the judge.

How To: Prune tall hedges

We next discuss trimming regular hedges. Most people just want a hedge that's tidy and neat, one that performs a function of blocking a view. We discuss some newly planted Boxwoods. Glenn planted these several months ago and wants to keep these low growing, about the height of the wall behind them. When the new growth starts to come up and the plant has reached its desired height, he prunes them. Glenn leaves an open space between the plant and the wall, this allows for good air circulation, ...

How To: Make homemade bathroom cleaners

Are you worried about how your bathroom cleaning supplies are damaging the environment and your own air? Use these recipes to create non-toxic, homemade bathroom cleaners instead. Never mix homemade cleaners with commercial cleaners, because when mixed, they can produce toxic gases. Use the same safety precautions as you would with store bought cleaners- keep them out of reach of children and pets, and out of your eyes and mouth. Always work in a well-ventilated area. Store your cleaning ingr...

How To: Follow along with cricket gameplay by learning the rules compared to baseball

Have you ever heard of cricket? No, we're not talking Jiminy Cricket or the wireless cell phone service provider. We're talking about CRICKET. The team sport, nicknamed "the gentleman's game," is the popular sport of choice in places like India, Australia, South Africa, Sri Lanka, England, Pakistan and Zimbabwe, though not America. But guess what? It's very similar to the American pastime we all love so much— baseball.

How To: Why Opened Wine Doesn't Last Long (& How to Change That)

Bad news, guys. The shelf life for liquor leftovers does not apply to your two-buck chuck. While an opened bottle of your favorite whiskey will stay respectable for ages thanks to its high ABV (which makes it inhospitable to outside elements), an opened bottle of merlot will sour quickly. However, it turns out that red and white wines have different life spans once they're opened—for reasons which we'll cover below.

News: Things to Do on WonderHowTo (07/18 - 07/24)

WonderHowTo is a how-to website made up of niche communities called Worlds, with topics ranging from Minecraft to science experiments to Scrabble and everything in-between. Check in every Wednesday evening for a roundup of user-run activities and how-to projects from the communities. But don't wait—start submitting your own projects to the most appropriate World now!

How To: Get rid of a perm

If a perm is too curly, get rid of the perm by shampooing the hair, applying a heavy conditioner and using a chemical straightener. Discover how hair salons can get rid of perms with this free video from an experienced hairdresser.