In this tutorial, we learn how to shift gears on a 2008 Ninja 250 motorcycle. First, pull in the clutch, take it down to first, then give it gas and release the clutch to get the bike started. To shift gears, pull in the clutch, pick up, then ease out the clutch, then give the bike gas. Keep doing this to change in between the different gears on the bike. Practice doing this in an empty parking lot and don't forget to keep on the gas while you are doing this. You may let go of the clutch to q...
If you are a beginner when it comes to bike riding and you're constantly finding yourself to be sore, then check out this next tutorial. In this video, you'll find out how to perform four basic abdominal exercises that will help get rid of soreness and imrpove your bike riding experience. Good luck and enjoy!
In this clip, learn the simple trick behind opening a full beer bottle with a spinning bike wheel. This is a pretty cool bar trick, that can be done at picnics, cook outs and anywhere else you might have a bike handy. Try it but be careful - the cap will shoot off pretty fast and it goes far!
For the hardcore bicycle enthusiast, repairing your own bike is a fact of life. It only gets more challenging the more advanced and elaborate your bike is. This video will teach you how to adjust your manually pulled Shimano disk brakes for better performance. And for preventing you from flying into an intersection when your brakes fail.
In this tutorial, we learn how to use the front break on a motorcycle. Using the front break only will give you 70% stopping power while you are on your bike and in motion. If you only use the rear break, you will have 30% stopping power while in motion and riding your bike. This is the worst option of all, because it will take you longer to stop and you have greater risk of hitting someone. Make sure to stop the proper way by using both the front and rear break to stop the bike while you are...
Active Expert Gale Bernhardt explains the importance of seat height with this instructional cycling video. It's critical for you as a cyclist to have your bike fit to you. Setting the seat height just right has minimal motion, or quiet hips. A seat height that is correct for you minimizes injury and maximizes power output on the bike. So learn how to set the correct seat height on your bike with this cycling tutorial video.
Want to learn how to tailwhip your BMX bike? Well, why don't you let Ben Snowden help you out. Watch as Ben Snowden teaches you how to tailwhip on a BMX bicycle in this video tutorial.
Moving cargo on bikes is not commonly done in America, but in the rest of the world people carry their whole lives on their bikes with ingenious storage methods. If your bike doesn't even have a basket, watch this video to learn how to make one yourself and make your bike much more practical.
When you need to replace and install the brakes and rotors on a motorcycle, the rotor is one of the easiest things to take off and put on. It's an important piece to the bike and can be taken care of in a matter of hours.
If you plan on doing repairs for you own motorcycle, there are a few tools that you'll need first. One of the most obvious is a stand. These help lift the bike and allows you to get into certain areas without having to worry about tipping the bike over.
Bike got a flat? Fear not, this how-to video can save the day! If you're tire is always low on air no matter how often you pump in air, or if the tread is worn down, it might be time for a tire change. Watch this video bike repair tutorial and learn how to change a bicycle tire.
This how-to video demonstrates the process of oiling a bike chain. A well-oiled chain will keep the bicycle running smoothly and prevent any possible breakage. Watch this video cycling tutorial and learn how to oil a bike chain.
This how-to video details the steps for getting on your bike. Before getting on, you should perform a safety check to prevent any accidents or injuries. The step over and straddle the bike. Watch this video tutorial and learn how to mount a bicyle.
If you do a lot cycling, or are about to go on a long bike trip, you might want to check out a new bicycle seat. This how-to video shows different options for saddles. There are different materials and styles to help keep you comfortable while sitting. Watch this video cycling tutorial and learn how to pick out a good bike seat.
This motorcycle driving tutorial explains how to ride a motorcycle by showing you how to shift the gears of the bike. This video goes into detail about how gear shifting works on a bike and then reminds you not to overthink it in practice!
This segment is from the old "Basics" video by Transworld RIDEbmx. Starting with the anatomy of a bike ramp and moving on to dropping in, airing, and lip tricks, this video tutorial covers all aspects of basic ramp riding. So, see how to ride a ramp with your BMX bicycle, from start to finish. You learn all of the basic ramp tricks for your BMX bike. Just see for yourself.
Some people may not realize it, but getting your bike soakes in water can be a bad idea. Not only can it lead to rust, but certain parts and componenets can become damaged. This leads to you having to replace it sooner than later.
In this tutorial, we learn how to ride a motorcycle safely with a passenger. First give your passenger gear for themselves, then have them sit behind you on the bike. Make sure they hold onto you while you are driving, and you take turns more slowly at first. Turn the sides gently and have them lean into the turns with you. Before each of you get on the bike, tell your passenger how to behave while they are riding on it. This will better equip your passenger to know what to expect and how to ...
Danny Lipford and Joe demonstrate how to make a bicycle rack out of repurposed closet racks. Closet brackets can be used to store bicycles. Instead of hanging the bicycle on the ceiling for long term storage, fasten closet brackets to your garage wall to more practically easily access your bicycles on an everyday basis. First, drive drywall screws into the wall studs. Space the brackets about 16 inches apart. Hang the bike right on its crossbar from the brackets. This method only works with b...
Ever had a spoke break on your bike wheel? Don't throw the wheel away! Repairing a spoke only takes a few tools and some patience. You will need, at a minimum: a freewheel tool (used to remove the part of the wheel that engages the bike chain), a wrench, and a screwdriver. First, remove the tire and inner tube from the wheel. Next, remove any parts of the broken spoke that are accessible from the underside of the wheel rim. If the spoke is attached to the side of the wheel where the freewheel...
In this video, we learn how to make a u-turn on a motorcycle. You must be able to complete a u-turn without putting your foot down. Depending on the size of your motorcycle, you will need 20-24 feet to do this properly. The most common mistake is oversteering and putting your foot down. Keep the clutch in the friction zone, drag the rear bike the stabilize the bike, add throttle if needed, and shift your weight. Keep your head up and make sure you are looking all the way through the u-turn. D...
In this tutorial, we learn how to start out on a motorcycle. Before you ride a motorcycle, you will want to learn where all the controls are. After this, you need to make sure all the springs are in place and the clutch works well. Then, check the engine oil to make sure it's full, and then make sure the throttle is working correctly. The steering bar should also be checked and the ignition switch should be checked. Once you know that your bike is ready, then you can pull the kickstand up wit...
This video tutorial is in the Sports category which will show you how to adjust your front brakes on your bike. The brake pads are very adjustable. It has 360 degrees rotation which helps in installing it on the bike easily. First install the brake arms. Then loosen up the brake pad screw and lower it to bring it in line with the rim of the wheel. Now hold it in place and tighten the screw. Thereafter you can any vertical and horizontal adjustments. You can then repeat the same procedure for ...
In this video, we learn how to adjust your head seat. You want to make sure the top of your stem is adjusted correctly and the spacers are adjusted correctly. Go in and tighten the top cap pole until it's just snug. Then, when you grab your bike and roll it forward, go in and tighten it some more. If it's too tight, it's going to bind up and you won't be able to turn your handle bars. Loosen them up as much as you can without them being too loose. From here, you will be able to ride your bike...
In this video, we learn how to change the front brake pads on a motorcycle. First, grab a socket wrench and remove the mounting bolts that are around it. Then, remove the caliper from the bike. From here, you will be able to access the brake pads and remove them from the motorcycle. Replace these in with the new brake pads and then replace the caliper and the mounting bolts around the bike. Now you should be finished with changing the brake pads and you can test out the brakes to make sure it...
In this video, we learn how to ride with clipless pedals. These are a great option to consider. The shoes and pedals work together so when you step on the pedal your foot clips into place. The benefits include a better foot to pedal control and it's safer because it gives you instant entry and release from the petal. To wear, put the shoes on and make sure you spin one petal to the bottom of the pedal. Now, step down onto the pedal until the you hear it clip into place. After this, start to r...
In this tutorial, we learn how to change a bicycle tire & replace the inner tube. First, take the wheel off of the bike. Then, see if you can find any holes on the outside of the tire. Then, remove all air from the tire tube and remove 1 side of the tire using tire levers. After this, completely remove the inner tube and then inflate the tube and check for holes. Check the inside of the tire for sharp objects, then find out which way your tire should roll. Install one bead of tire back onto t...
In this video, we learn how to draw a Harley Davidson Road Glide. Start off by drawing the body of the motorcycle as a rough outline. After this, start to fill in the different areas by making large sections of the bike 3-D. Draw in the wheels and the back of the bike, as well as the handle bars, mirrors, and lights. Draw the seat and back seat in, then start to add in further details. Apply shadowing to the car, making some parts darker than others. When you are finished with the drawing, co...
If you need to do a little bit of maintenance work on a motorcycle, this next tutorial will cover rotors and brake calipers. Brake calipers will need to be seperated even before the brakes can be replaced on a bike. In this video, you'll find out how to replace the rotor and brake calipers on your bike. It's an easy thing to do and will do wonders for your motorcycle. So sit back, pay attention, and good luck!
There's nothing like taking a nice, relaxing bike ride during anytime of the year. Not only do you feel more in touch with your surroundings, but you're able to burn some calories as well. But all the joy and happiness that it brings can quickly be sucked away by a flat tire.
In this tutorial, we learn how to replace the spark plugs on a 2008 Kawasaki Ninja 250. First look underneath your bike to find out exactly where the spark plugs are at. Next, use wrenches and ratchets to loosen the parts around the spark plugs, then remove the spark plugs completely. After you have pulled them out, replace them with the new one and secure them into place. When finished, replace all the casing around the plugs and make sure you secure them tightly. Add on all bolts when you a...
This video from Canada Bicycle Parts shows how to change a bike tire. The tools required are a bicycle pump and tire levers. He demonstrates with the rear tire, and puts the chain on the proper cog to create less tension on the chain. He releases a lever on the brake and opens the quick release lever and lowers the rear wheel. He removes the valve cap and removes all the air from the tube. He demonstrates how to remove the tire with two tire levers. He explains how to determine what caused th...
Professional Triathlon, Jessi Stensland, shows tricks to making quick and smooth triathlon transitions. She takes you through racking of your bike, bike equipment checks, gear positioning, helmet and sunglasses placement, and shoe preparations to minimize the time needed to transition from swimming to biking. Similarly, she covers the biking to running transition and shows how to position shoes, visor, identification, and nutrient packs so that you can quickly transition into the final leg of...
Sick of those training wheels on your bike? Take the next step and get rid of them! Check out this video tutorial on how to ride a bicycle without training wheels (for kids).
This how-to video demonstrates the process of switching gears on a bicycle. Depending on the number of chains and hubs, your bike will have a varying number of gears. You should be aware of the terrain and make sure you are in the appropriate gear. Don't change gears under power. Know how and when to change gears to make the bike ride smoother and more enjoyable. Watch this video cycling tutorial and learn how to shift gears on a bicycle.
Check out this video tutorial on how to do the bunny hop to manual trick on a bicycle. Your BMX instructor will go through the basic steps of how to do the bunny hop to manual trick on a bike, along with a few cool out-takes for you to enjoy.
Folding a paper ninja star is like riding a bike - once you learn how, you'll never forget. Watch this video to learn how to make a paper ninja star, also known as a shuriken. All you need is one 8.5 by 11 sheet of paper to make your own ninja star.
Sit back and ride as G Word correspondent David Newsom finds out the benefits of an electric bicycle. Watch and see how to convert a conventional bike to a battery-powered riding machine.
Learn how to ride a motorcycle safely. The bike in the video is a 2008 Triumph Street Triple.
Cool! A cloud in a bottle! You can make one yourself by watching this little how-to. You'll need a bottle, a bike pump and a little attachment from the hardware store.
