Branches Based Search Results

How To: Care for a Serissa Bonsai plant

The Serissa (Serissa foetida syn. Serissa japonica), is a great little plant for Bonsai. It flowers for most of the year with tiny white and sometimes pink flowers. It is extremely easy to propagate through cuttings. Just take a cleanly cut branch and stick it in sphagnum moss and it should grow easily. It takes very well to pruning and can fill out quite nicely when pruned frequently. This particular specimen had a wild and unkempt look to it. Making, raising, and caring for bonsai is easy i...

How To: Solve exponential and logarithmic equations

In this video tutorial the instructor shows how to solve exponential and logarithmic equations. Solving exponential equations can become very difficult if it involves large numbers. To solve these kinds of complex equations you need to get all the numbers to the same base number. The base number raised to some number should give you your original number. Now if you write the numbers as exponents of your base number you can directly equate the exponent part and solve for the missing variable. ...

How To: Prepare a persimmon for eating

A persimmon is not ready to eat until it has a soft consistency like jelly or pudding, though the fruit can be harvested and brought inside while still hard, so long as the branch the fruit hangs from is picked along with it. One way to be sure that a persimmon is ready to eat, is to press a finger against the skin of the fruit. If a fingerprint is left, the persimmon is ripe and delicious. Once they start getting soft they go bad very quickly, so it's good to prepare them so you can eat them...

How To: Hang indoor Christmas lights

A presenter from The Home Depot gives you several tips and professional secrets on how to hang your indoor Christmas lights making this tricky process a little bit easier. She takes you through the selection of lights, planning and the installation of lights.

How To: Compile a kernel in a Debian-based Linux distribution

In this four-part video tutorial series, you'll learn how to compile a Linux kernel on a Debian-based system (e.g., Ubuntu). You'll learn two separate methods for kernel compilation, both (1) how to make the kernel into a Debian package, which can be handy if you're using a package manager and (2) how to install the kernel manually with make and make install. Take a look!

How To: 5 Weird & Easy Ways to Water Your Christmas Tree

Christmas trees, once decorated and brightly lit, are the penultimate holiday decoration, but authentic pines lose their brilliance fast without any nourishment. Plus, they are major fire hazards without regular hydration. But watering one requires a lot of sliding around on the floor, and it can be hard to tell how much water is in the bowl beneath the dark, prickly branches. These five hacks can help!

Better Than Brita: Water Filters with No Plastic Parts

I used a plastic water filter for years. Who wouldn't? It cuts down on buying bottled water, which, as it turns out, is pretty much the same as unfiltered tap water. Plus, bottled water is terrible for the environment and your wallet, too. Water that costs only pennies a day and actually was purified as opposed to just saying it was? That's a no-brainer.

How To: Make bourbon and branch

Bourbon is America's contribution to the whiskey family, and this isn't so much a drink as it is a tradition. Take bourbon, and ideally, dilute it with water from whatever branch of the local tributary was used to make the bourbon. If you don't have access to that, then use whatever filtered water you can get from the store, and be sure to use it for the ice cubes too.

How To: Use image-based lighting & depth of field in Cinema 4D

In this tripartite video tutorial, you'll learn how to create image-based lighting and depth-of-field effects within C4D. Whether you're new to MAXON's popular 3D modeling application or are just looking to get better acquainted with Cinema 4D and its various features and functions, you're sure to enjoy this free video software tutorial. For more information, including complete instructions, watch this 3D modeler's guide.

How To: Fold an origami orchid

Learn how to make an origami "orchid" by slightly altering an origami iris / lily flower. This origami video shows how to make what I call an orchid flower... really it's something I made by mistake when first learning to make an origami lily / iris. You'll need to start from the frog base.

How To: Mix a Brandy Alexander, Pink Squirrel and Grasshopper

Mix the Brandy Alexander, the Pink Squirrel or the Grasshopper! Each cocktail uses creme de cacao and whipping cream. The Brandy Alexander cocktail uses a brandy base, the Pink Squirrel uses an almond liqour base, and the Grasshoper uses green creme de menthe base. All are shaken with ice and strained into a martini glass. Perfect after dinner cocktails and very easy to make!

How To: Write a DBQ (or document-based question) essay

In this video tutorial, viewers learn how to write a document-based question essay. Data base question essays evaluates student ability to formulate and support an answer of documentary evidence. Each document based question is broken into 2 parts: short answer and essay. The short answer assess student ability to analyze student documents individually. The essay assess the student ability to synthesize and create an essay based on an assortment of documents. The essay should contain an intro...

How To: Make flower arrangements on a card

In this Arts & Crafts video tutorial you will learn how to make flower arrangements on a card. To make this you will need punched out pieces of flowers, snowflakes and leaves of different shapes, sizes and color. You will also need some small size paper flowers, glue dots and cards. To make flowers, you can take a rose and twist the wire stem around a paintbrush to give it a curly shape. Then put a glue dot below the rose and attach it to a punched out snowflake. Take some punched out branche...

How To: Draw a raven

First of all you have to draw the outline using light color rough lines. Draw the face with beak and then draw the two wings hanging down. Also draw a tail at the back of the bird. Now you have to draw the outline by using a pen. Start by making the beak of the bird at the front. Make the wings with the feathers. Also make the outline of feathers to make the tail. Once the main outline of the bird is ready then you have to erase all the previous rough lines. Now you have to darken the body wi...

How To: Identify problems with a silver berry & tomato plant

The video answers questions on whether containerized tomato plant need to be replanted, problems with yellow tips of an oleander and spots on a silver berry shrub. The tomato plant may be replanted in a bigger container and staked/caged to avoid wind damage. If planted in the ground, it is recommended to plant it at an angle, up to the first branches because tomato plants are able to set out adventitious roots. The yellow and brittle leaves of an oleander is also identified as the result of f...

How To: Graft an apple tree

Cityslipper shows you how he uses the cleft grafting method to make a less appealing green apple tree produce better tasting red apples. 10-12 inches long scion wood is collected from the good apple tree while it is dormant. Care is taken not to let the twigs dry out. Selected scions should not have spurs rather they should have leaf buds that lay flat against the twig. A good host twig on a healthy-looking branch should be selected. A clean cut should be made with the fine teeth of a grafing...

How To: Grow Juniper bonsai from cuttings

First of all you have to take the branch of the juniper tree. You can do this activity in the early spring which is the months of February and March. Take a very sharp knife and then peel the bark until you see green color. You have to tear the bark down until you see the greenery below the bark and that greenery is called cambium which is extremely thin. You have to use your knife to remove any kind of knots from the bark. Now you have to dip it in the “RooTone” which is a rooting hormone an...

How To: Power carve a bonsai

Carving a bonsai tree can be an interesting and rewarding experience. One may think that the tree would be injured in this process, however the process can actually strengthen the health of the tree. The first step when carving a bonsai is to reduce the height of the tree to about one meter. The necessary tools required consist of: a high speed grinder, a rotary cutter, and a weasel. The rotary cutter is good for removing large amounts of wood. Before beginning to cut the tree look at the tre...

How To: Fold an origami bird base

This tutorial video shows how to make an origami bird base. As you might guess from the name, the bird base is used when making the traditional origami crane; however, it can be used as a starting point for other origami patterns as well, so it's good to learn how to make this fold. Follow these steps to learn how to fold an origami bird base.

How To: Find the lowest common multiples

Watchers of this video will learn how to find the "lowest common multiple", the lowest whole number that can be divided by each of two numbers evenly. For example, the lowest common multiple of 8 and 12 is the lowest number of which 8 and 12 are both factors. To find the lowest common multiple of 2 numbers, find the factors of both numbers. One way to do this is to make a "factor tree", drawing branches with factors from each number until it cannot be factored any more. Once both numbers are ...

How To: Find the areas of a parallelogram and a triangle

The video teaches the viewer how to find the area of a parallelogram and the area of a triangle. For a parallelogram, the first step is to find the right angle, the line perpendicular to the base (this is a line you draw, not part of the parallelogram). The height of the line that forms this right angle with the base is the perpendicular height. Next, find the length of the base. The area is the base times the height. For a triangle, find the right angle with the base (again a line you draw)....

How To: Make a water based finish look like it's oil based

How do you make a water based finish look more like oil-based finish. Its a common problem since water-based finishes are "water-white", which means they don't impart any color to the wood. This can be great in certain situations, but not so great when you want your project to have that warm glow to it. In this woodworking tutorial, you will learn how to use dye, shellac, and boiled linseed oil to try to spice up our water-based finish.

How To: Build a handheld version of the TSA's microwave-based body scanner

With the TSA's full-body scanners occupying a great deal of airports nationwide, the debate remains as to whether air travelers should continue to be subject to immoral security techniques and possible health risks due to the x-ray scanning devices. The "advanced imaging technology" may help keep obvious weapons out of major airports, but scanning naked bodies seems more voyeuristic than crucial to national security. But while the argument continues, one woman is taking a stand… well, not rea...

How To: Find surface area of a prism using a specific example

In this video, we learn how to find the surface area of a prism using a specific example. First you will need to find the base and height of your prism. If the base edge is 6 and the height is 8 you will do the equation Area= 1/2 bh. Doing this math out on your calculator, you will get the answer of 12.39. This is what the size of each triangle in the prism is going to be. The area of one pentagon (or the base) is 61.92 inches squared. If you need help with this, you can try drawing the pictu...

How To: Find the surface area of a pyramid with BabelMath

A pyramid is a three dimensional figure with the base in the form of a triangle and three slant sides to it. To find the surface area of a pyramid you have to find the area of the different pieces that make it up. The pyramid base can be triangle or even other geometric figure like pentagon. So first draw the base of the pyramid separately and compute its area first. Now compute the area of each sides separately. The area of each side can be same if the pyramid is a regular pyramid. Some time...

How To: Use a protractor to measure an angle

This video in the Education category will show you how to use a protractor to measure an angle. This video is from Brightstorm. In Geometry it is important to know how to measure an angle. This is a very simple and easy process. In order to measure an angle, you will need a protractor. Every protractor has a base and a center point marked on the base. You will put the center point on the vertex of the angle. Then align the base line of the protractor perfectly on one side of the angle. Now ch...