If you're going to an event formal enough to warrant a tie, you might want to go with a conservative, traditional knot like the full or "double" Windsor. This video tutorial presents a careful, slow-motion overview of the knot tying process and will have you tying perfect full Windsor knots in no time at all.
Car drifting is a very cool, racecar style driving trick. This two part video series will show you how to drift like a pro. Grab the wheel and be careful!
This how video will teach you how to attach beads when crocheting. Beads can be found on purses, doilies, scarves, and more. This will take you through a step by step on how to apply. Be careful now, applying the bead at the wrong part of doing a stitch will cause problems in the future. If not attached at the proper spot, the beads will loosen and flip flop around.
This video tutorial demonstrates how to make a flying tea bag. You only need is a cheap tea bag and a match to set it off. The tea bag remains are so light that the hot air produced from the ashes is enough to make them lift into the air. This experiment is slightly dangerous, so be careful!
This video shows how to do a Knuckle Choke (nogi) from Mount. This is a dangerous martial arts choke hold, so be careful when doing it.
Three different prank in order to scare your roommate. The only one that will cause harm to your friend will be the first one. So be careful and be safe. Use this as inspiration for one of your April Fools Day pranks!
This excellent detailed video demonstrates how to create rigid molds with a fast cast urethane. Ideal for smaller models/molds with a flat side, fast-cast urethanes are widely used for their ease of use, low cost, and quick de-mold times. However, their use requires careful application of release agents. This process can be used in automotive, mechanical, fine art and film special effects uses.
This video illustrates in great detail how to create a perfect urethane rubber mold. Urethane Rubber molds are widely used when a flexible mold material is required and a more expensive or less abrasion-resistant silicone rubber is not desired. However, their use requires careful application of release agents. This process can be used in automotive, mechanical, fine art and film special effects uses.
Custom Products Paintball Tanks come with a fill nipple filter. This causes the tank to fill up EXTREMELY slow. To remove the filter, simply remove your fill nipple, and tap out the filter.
This video is a demonstration of an easy way to boil water while camping. Simply take a plastic bottle, fill it to the top with no space for air, close the bottle, start a fire and place the bottle in the fire. Since there is no air in the bottle it won't melt. After a couple minutes you will have boiling water. Careful removing the bottle from the fire.
There are so many different devices today that have Wi-Fi capabilities--notebooks, handheld gaming devices, tablets, and more. Why not share some of the 3G and 4G internet that streams into your Motorola Droid 3 with the other electronics you carry with you? You can turn your Verizon Wireless Droid 3 smartphone into a mobile Wi-Fi hotspot using the mobile hotspot menu on the android phone.
What is it about Italian food that makes it seem like we're indulging ourselves with something truly special every time we eat it? Maybe it's the careful and loving preparation, the scintillating flavors that revolve around cheese (yum), tomatoes, and pasta?
Solve a Rubik's Cube faster with F2L techniques
Brushing your teeth is pretty mundane. Why not enliven the experience for a friend or enemy by pranking them into thinking that their mouth is gushing blood? This video will teach you how to use food coloring and an oven to set up the Bloody Toothbrush Prank. All you do is cook the food coloring into it's powdered essence, apply the powder sneakily your victim's toothbrush, and wait until they brush.
Okay, so just as a safety precaution before you dive right in and make yourself a batch of cotton candy at home, remember that melting sugar and corn syrup requires very high temperatures, so you could get burned if you're not careful. Make sure you keep a bowl of cool water next to you at all times just in case any of the hot stuff gets on your skin.
A potholder loom is a square-shaped loom that allows you to weave thickly woven fabric, but often if you're not careful you can create gaps in between the yarn. But that problem will be completely solved in this video, in which you'll learn how to bypass the gaps. The result will be a basket weave-type fabric that's thick yet lightweight enough for summer scarves.
In this tutorial, Nancy shows us how to prepare a pumpkin to use in recipes. First, take a pumpkin and put it into a pan, then cut a hole into any part of the pumpkin. Now, position the pumpkin into the pan with the hole facing downwards. Now place the pan into the oven on 350 and cook until it's soft. There should be a lot of water in the pan, so be careful when you take it out of the oven. You can nose use this pumpkin to use into any different recipe, such as fresh pumpkin pie, pumpkin bre...
The iPhone 4 is brand new, but accidents still happen - even right after you get it, right? So, if you have cracked or scratched up your screen and can no longer use it, check out this tutorial. Apple won't fix the damage if they think you did it, and a repair shop will charge tons of money. This tutorial will walk you through how to take the screen off on your own and replace it with a brand new one. Be careful and maybe think about investing in a case next time.
Are you stuck somewhere without a can opener? Has this ever happened to you..you move to a new apartment and head to the grocery store.. pick up a bunch of cheap and tasty canned goods for dinner only to arrive home and realize you forgot to buy a can opener along with them? Not to worry!
In this Beauty & Style video tutorial you will learn how to clean your Jordans and make them look like new. There is nothing complicated about this process. You will need alcohol, seaglow, cloth, cotton, 9 tips, sponge, dish soap in a cup with water, old tooth brush and a water hose. With the tips remove anything stuck inside the grooves on the sole. Scrub alcohol with cotton on the sole of the shoe and the dirt comes off instantly. Scrub it with toothbrush to remove dirt from the grooves and...
In this tutorial, we learn how to make tarragon walnut brown butter sauce. You will need: 3 tbsp unsalted butter, 1/4 c freshly squeezed lemon juice, 1 tbsp chopped fresh tarragon, 2 tbsp chopped walnuts, salt and pepper. First, throw the chunk of butter into a sautee pan on medium heat until it foams up. Cook this for about 6-10 minutes until it turns a light brown color, then add in the walnuts. Be careful not to burn your walnuts, just swish around in the butter for 1 minute. After this, c...
In this how-to video, you will learn how to draw Salvation Army Officer Bob Swanson from the cartoon strip Mustard Seeds. First, you will need a pen and paper. Now, start off by drawing the hat of the figure. From there, move on to the glasses, nose, hair, and mouth. Fill in the hair with the sharpie. Next, move on to the jacket and tie. You can add the arms, hands, notebook, and legs from here. Make sure to add the folds on the pants. The feet are next. Fill in the jacket and hat with the sh...
In this how-to video, you will learn how to create Dragonball Z style hair. First, you need to apply Renati into your hair. Now, use the comb shown and brush your hair. Brush upward so you can achieve the basis of this look. Be careful as it may hurt. Use got2b glued hairspray on your hair to keep the hair up. Now, apply some wax to your to put the hair together. Apply this to the top of your hair. Keep applying the hairspray and wax to complete the look. Try and achieve a point at the top. T...
Removing the power supply from the iMac G5 is a two step process. First, see where the power supply is located. Then begin the process of removing it. You can do using a very easy way described in this video. First unscrew the 4 torx screws that are located around the edges of the power supply. Be careful not to be too rough while doing so. Once you have unscrewed them, then gently lift or remove the power supply. However, we still have to unplug it from the iMac. Therefore, carefully unplug ...
Arya shows the viewers how to make a simple bowl of oatmeal. To begin, put a couple scoops of steel cut oats into a medium-sized bowl. Add the desired condiments such as cinnamon, cardamom, coriander, and nutmeg. You then pour hot water into the bowl and put it into the microwave. Set the time for four minutes and forty-four seconds at 30% power. When done, be careful removing it because remember, it's hot. Add frozen berries of choice, a squeeze of honey and a splash of milk. Stir until cool...
Learn how to choose and care for poinsettias with Southwest Yard and Garden's John White. You will be taken through the typical height and specifications for poinsettias, as well as what to look for in the leaves and flowers. One of the most important parts of growing poinsettias is keeping to a specific schedule. Measuring the plants is also important as plants that are too tall or too short are undesirable. Remember to frequently water the plants, but be careful not to overwater. Also, keep...
This video demonstrates how to do image transfers. For this project, you will need the following: acid free card stock, stencils, transparency film, a gel medium, and a PC.
This video illustrate how to boil water without pots or pans. Here are the following steps:Step 1: You need fire, water and any plastic container with lid.Step 2: Now take water and fill it in the bottle so that there is no air present in the bottle.Step 3: Now put on the fire and put the seal bottle on fire with a distance of around 12 inch.Step 4: Now let the heat warm up the bottle and be careful while handling the bottle.Step 5: After the water has heated up, bubbles will appear in the bo...
Have you ever been caught with nothing to eat but canned soup or tuna fish and no can opener in sight? In this video, AJ Conover demonstrates how to open a can with a hammer and nail. First make sure the hammer and nail are very clean. Use the hammer to lightly pound the nail into the can's lid creating holes. Be careful not to pound too hard and drop the nail into the food inside the can. Hammer enough holes to make an opening around the edge of the can's lid and then pry the lid up and open...
This video shows how to wash a horse's sheath. The instructor notes that you do not want to wash the horse's sheath to often because certain good bacteria needs to exist in the horse's sheath. It is noted that you can use soap but his method of choice is to just use water to clean the sheath. This sort of sheath cleaning is only necessary with tame horses and must be done very carefully. The instructor notes that you can just let water run into the sheath and just let it remove any dirt. It i...
CIA360MODS teaches you how to change the LED colors on your XBox 360 power brick. You need pliers, tweezers, a screwdriver, a soldering iron and smds. Unscrew the screws from the power brick and then take out the fan from inside. Follow the schematics and use the tweezer to grab the smd. Solder your new smd where the old one was. If you remove the green one, you can add a blue one instead and only that color will change in the power brick. Remember to be careful when doing soldering and keep ...
This video shows you how to make a prank toy called "The Evasive Beeping Thing." You will need: a 555 timer, a couple of 3904 transistors, a couple of capacitors, some resistors, a 9-volt battery clip, a small speaker, and a small piece of circuit board to settle everything. Follow these simple steps:
Aluminum cans are useful for various DIY projects, but they can be tricky to take apart. In this video you'll learn how to easily disassemble cans.
Learn how to make an origami "orchid" by slightly altering an origami iris / lily flower. This origami video shows how to make what I call an orchid flower... really it's something I made by mistake when first learning to make an origami lily / iris. You'll need to start from the frog base.
Try out this science experiment... watch this video tutorial to learn how to make a simple rocket with film canisters. This is purely educational, and demonstrates the reaction of an Alka-Seltzer tablet, toilet paper, and water. If you don't have Alka-Seltzer, you can substitute it with baking soda, then substitute the water with vinegar.
Try out this science experiment... demonstrate pressure and volume. Watch this video tutorial to learn how to create an explosion with liquid nitrogen and a plastic bottle. See the demonstration of the exploding reaction of the pressure build up in the bottle.
Do you even know what a Leyden jar is? Well... it's an early form of capacitor made from a glass jar with layers of metal foil on the outside and inside. This video tutorial will show you how to make a Leyden jar to store static electricity. This Leyden jar will give you a powerful shock!
Chris McMillian, master mixologist, shows you how to mix a Whiskey Sour cocktail. The Whiskey Sour is one of the simplest cocktails to make, it balances sweet and sour and is a cocktail every bartender should know.
In this how-to video, Bill Falk and Mark Srawderman will teach you to pole vault like a champion. This is a very hard sport to mater, and it requires a lot of time and dedication. Be careful with it, but have fun!
Turn bad hair days into sexy mama days by checking out this video on how to camoflauge bad hair days with a stylish scarf. No crazy professional hairstyling skills here - just some ingenuity and careful placement of the scarf over the unruly portion of your hair.