In this video, we learn how to destroy jeans to look like Hollister's. First, you will need to take your jeans, a nail file, and scissors. After you have these, use your files to rub onto the jeans where you want your hole to be at. Go from side to side to create a lighter look than is on the rest of the jeans. After you start grating through the jeans, there should be a small hole forming. Pull at the strings as you see them, then stick your finger inside the hole to make it the size you wan...
Once you've removed your old faucet, it's time to install the new one. Many single handle faucets allow you to install them as either a single-hole mount or as a three-hole mount using an escutcheon plate, which fits into the two outside holes. This video from Lowe's and Delta shows you how to install the faucet with the three-hole mount. You'll need a channel lock pliers, adjustable wrench, thread seal tape, silicone caulk and a wrench.
In this video, we learn how to craft a lizard out of foam and pipe cleaner. First grab your piece of foam and poke a hole into the front of it going through it, then through the back going all the way through. Next, poke the pipe cleaner through the holes so it looks like four legs. After this, poke a hole in the back to string the tail through. Poke a hole through the front and place a red pipe cleaner inside of it with a curl at the end to make it look like the tongue. To finish, draw on tw...
In this video, we learn how to play the dizi, a Chinese bamboo flute. First, fine the mouth hole where you place your mouth. After this, look to see the different finger holes that are on the side of the flute. At the end, you will see air vents that are not to be confused with the finger holes. To prepare the flute, you can twist it so the pitch is changed when you play it. Now, place your fingers along the finger holes and start to blow into the mouth opening. After you do this, you will be...
In this video, we learn how to make a brownie screwball cake. First, add in flour to a mixing bowl, then add in powdered cocoa and a teaspoon of salt. Next, add in baking soda ( 2 tsp) and mix everything together. Now, pour into a cake pan and make three holes in the pan with your hand. Now, add in 2/3 c oil into one of the small holes you just made. Then, place 2 tbsp vinegar in the other hole and 2 tsp vanilla in the other hole. Now, pour in 2 c hot water to the pan and mix everything toget...
In this tutorial, we learn how to make eyes for clay animation puppets. First, drill a hole inside of a block of wood, then insert a bull so it fits snug inside of the hole. After you have done this, use a drill to make a hole that goes half way down through the pupil. Now, use paint to fill in the hole where the pupil would be at. Push the balls into clay to hold them in place while painting. Make sure the dots you have on both eyes are even. When finished, paint a black circle around them, ...
In this tutorial, we learn how to play the flute for beginners. To make a sound, you will put the hole directly onto your lips and make the shape of the hole with your lips. Then blow into the hole, trying different positions with your lips. You will place your fingers on the different key holes, and remove your fingers depending on what notes you want to play. You will press down keys on the sides to change the air sound as well. You will start out learning the different keys and notes, then...
In this two-part flautist's tutorial, you'll learn how to play the "Amazing Grace" hymn on a five-hole flute. tutorialRegardless of your preferred style of music, if you want to be great, you'll need your head and hands on the same page. And there's no better way to get your head and hands on the same page than to practice. Happily, the Internet is awash in video tutorials like this one.
In this Arts & Crafts video tutorial you will learn how to make an egg carton tulip. Cut out two cups from an egg carton. Then cut petals into the cups by cutting out triangular shapes. Make four petals on each cup. Then with a pencil, poke two holes on the bottom of one cup opposite each other in line with the two lowest points of the petals. Do a similar thing on the other cup but, in line with the two highest points of the petals. Then take a pipe cleaner and pass it through one hole of on...
Have a sneaking suspicion that bed bugs are sneaking around house? Unfortunately, bed bugs is a common problem amongst households and it's even more common to have trouble getting them to leave! In this video presented by Bed Bug Central, learn how to kill bed bugs by using Diatomaceous Earth - a naturally occurring, soft sedimentary rock that is easily crumbled into a fine white powder.
Do you have bed bugs hiding throughout the home? If they've gone from your blankets and bedding to say, you're child's toys... you might be a tad clueless as to how about cleaning items you can't throw in a washing machine. In this video presented by Bed Bug Central, learn how to clean those items with bed bugs you can't throw in a washer.
Are you suffering from bed bugs? Does "goodnight... don't let the bed bugs bite" hit closer to home these days? In this video from Bed Bug Central, learn about one technique to try and get rid of those pesky bed bugs: By using dusts.
The nose is one of the many challenging facets of drawing the human face realistically, and its central location makes it impossible to hide your mistakes. This video will demonstrate for and explain to you, the budding artist, how to draw a good-looking nose in pencil.
This video shows how to plant an iris. Be sure to select a spot that gets about six inches of sun a day to plant an iris. When planting more than one iris, be sure to space them about a foot apart. This will encourage them to grow tall. When you dig the hole, don't dig it too deep. Also, make a little mound in the center of the hole. Spread the roots of the iris over the little mound so that the hole drains and the plant doesn't rot. You want about a third of your rysem sticking up out of the...
By watching this video, you will learn how to create your own art journal. Begin by cutting pieces of heavy weight cardstock 5" by 8". After you have cut all your sheets, fold them in half. If you want a defined crease, you can use a bone folder. Next, poke small holes in the crease of each sheet. Start at the center and then poke one every inch above and below the center hole. Then using a regular running stitch, sew through each hole of a single sheet. Once you reach the bottom hole, bring ...
To make a journal made of junk you're going to need a couple of things. First an unbleached linen thread because it doesn't bleed out into your work, you'll need a candle, a binder clip and a stack of papers. The papers you need to fold down the middle and put in four evenly spaced holes down its spine so that it looks like a book. Use the clip to hold the papers together while you measure the thread. The thread needs to be three times the height of your book. Wax this thread using the candle...
LowkeeLT demonstrates how to patch a hole in a fiberglass boat hull. First, grind around the edge of the hole to make it smooth. Make an angle that goes towards the hull so that the resin won't get caught and create air pockets. Attach kitchen wax paper to the boat as a non-stick material for the poly resin to set against. Then, put down a flexible cutting board by duct taping the two layers on the outside of the hull and pulling it taut. Attach three layers of fiberglass strips with resin to...
When trying to locate water in a dry desert look around to see if there are any disingenuous trees since these trees are usually near lakes and falls. Once you have located one find a low spot or a damp area near the tree. Using a stick or another tool available dig a hole into the area until you find water. Make sure to keep the edges of the hole your digging nice and round so that the hole won't fall in on it self. When you've found water it should flow into the hole. The water is usable so...
Dan Perceval, founder of the sport of Xtreme Ice Skating explains us in the video of how to properly lace ice hockey skates. It starts with the wax laces. There are different forms but he suggests heavy wax since it lasts long. These wax laces are used to grip the boots. We normally we use 120 inch if there is no wrapping around and it should be in excess if you wrap around. Now we start with lacing. You can start outwards or inwards in hole one. He prefers outward so he inserts the lace outw...
In this video, Patti the Garden Girl will show you how to put drainage holes in your container garden from galvanized steel containers. To avoid your plants sitting in water, you simply need a hammer and a nail that is about a quarter of an inch thick. You then should hammer about 10 small holes in the bottom of your galvanized steel planter. This should allow proper water circulation in your planter, preventing your plants from drowning. This is a perfect and easy way for any gardener who wo...
Assemble tools and materials. You'll need a rim, a hub, and the proper length spokes and spoke nipples. You'll need a wheel truing stand, a spoke wrench, a flat screwdriver, and medium weight oil. A spoke tensiometer, a dishing tool and a nipple driver are optional. Place the rim in your lap with the valve stem hole directly across from you. Hold the hub in the middle of the rim with it axle vertical. These instructions assume you are building a front wheel 3x. Drop one spoke though every oth...
Drywall screws were originally created specifically for drywall projects. But they have become increasing popular for woodworking projects because you can often screw them into a soft piece of wood without having to drill a pilot hole. But because they have threads all the way up to the head of the screw they will not pull two pieces of wood tightly together. So to get the drywall screw to hold two pieces of wood tightly together you have to drill a shank hole through the first piece of wood ...
Looking for a new DIY project? Follow the steps in this video to get a great view of big blooms and colorful posies with box planters hung beneath your windows.
Microsoft Office OneNote 2007 is an incredibly versatile way to capture your thoughts and organize your work. It's far more than a sketchpad: its powerful import and export tools will create a central idea forum for you and your team. For detailed instructions on using the import and export features in Microsoft Office OneNote 2007, watch this video guide.
This how to video gives you a description of cello vibrato technique by Jamie Fiste, Cello Professor from Central Michigan University. This technique is easy to master and will improve your cello playing. Watch this how to video and you will be able to play vibrato on your cello.
Use an old PC that has been setup as a server to perform helpful tasks such as backing up computers on your network, storing media files in a central location, share one printer with every computers computer in the house.
Discover a new exotic typically Brazilian ingredients - Palmito. Despite being very popular in South and Central America, Palmito (Heart of Palm) has yet to make it into North American and European menus(much). Here's a very simple recipe to introduce you to the wonderful - Palmito.
In this screencast from Screencast Central we find out how to find out our local weather forecast, search within a specific website, ask Google a fact based question like the population of the USA and finally find out more about local businesses.
Learn how to replace you computer's central processing unit (CPU). Includes tips on buying a new CPU and installing it.
See how to use use the Retopo tool and View options to make round holes in tubes (or other surfaces) with Blender 2.5. Whether you're new to the Blender Foundation's popular 3D modeling program or a seasoned graphic artist just interested in better acquainting yourself with the application, you're sure to be well served by this free video tutorial. For more information, including detailed instructions, take a look.
This demonstrates the difference between hard polymers and soft polymers. The bag does not leak water as it molds to the softer polymer of the bag. If the pen had poked a harder polymer, most likely, there would have been leaking from the holes. This demonstrates characteristics of water, and how polymers can work. This also shows how certain leaks can be stopped.
This is a tutorial on how to cut the round holes on your R2D2 dome, why? Aren't there enough R2D2s out there? I think there are. But just in case you want to make your own Star Wars film, here you go.
In this soldering tip video brought to you by BEST, Inc. Bob Wettermann demonstrates the repair of plated through-hole printed circuit boards.
This is how to put bullet holes in anything, with realistic airbrushing that is.
Gussow shows the importance of the 4 hole draw and suggests various ways of approaching the 4 hole draw and the 4 hole blow on a harmonica. This is for intermediate and advanced harmonica players.
Drilling holes in wall tiles is a fairly easy skill to master once you know how. Follow these simple steps on how to drill a hole in a tiled wall for a hassle free experience.
In this video, Julie teaches viewers how to toilet train their cats. This is, to clarify, training to use a human toilet. First, you will have to get your cat acquainted with toilet seats. Take a toilet seat (that is clean) and tape it securely to the top of your cat's litter box. Once your cat is used to that, buy a sitz bath (or a similar-sized container) that will fit under the toilet seat but above the toilet bowl. Fill it with cat litter and wait until your cat is comfortable with using ...
Every now and then we all have carvings for sweet delicious donuts, and we all know they are best when they are fresh! With this simple guide, learn how to make your very own fluffy donuts and donut wholes.
During the summer, lace shawls become uniform for many fashionable women who want to cover up slightly during those nippy summer nights or jaunts out by the chilly ocean but don't want to compromise their style. Lace shawls, which are composed of many delicate patterns with holes interspersed for breathability, fit the bill just right.
This video shows how to create a rectangular hole in the face of a cylinder within Blender. Whether you're new to the Blender Foundation's popular 3D modeling program or a seasoned graphic artist just interested in better acquainting yourself with the application, you're sure to be well served by this free video tutorial. For more information, including detailed instructions, take a look!
