Chip's Path Search Results

How To: Make Tight Loops When Fly Casting

When casting a flyrod, in most cases, tight loops will allow the fly to travel farther, more accurately, and with less effort. To cast these tight loops, the tip of the rod must travel in a straight line path, slack must be eliminated, and there must be a constant acceleration to a sudden stop. The most common mistake is using the wrist to move the rod which causes the tip to travel in a half circle or windshield wiper type motion.

How To: Easily Find What Port a Service Runs On and Vice-Versa

I wrote a python script that allows you to easily ask what service runs on a specific port and vice-versa. Now, I am sure that such a program already exists on our lovely linux OS's, but... I didn't think of that before I started, and haven't found it yet. So if you haven't found it yet either, maybe you'll find this of some use. It's just called getport. If I have a port number, and want to know what services run on that port, I do:

How To: Keep Tiny Dust Crumbs Out of the Last Bowl of Cereal for More Crunch, Less Mush

Cereal may be the most popular of breakfast choices, but one thing that has always bothered me about it is the crumbs. Just like a bag of potato chips, when you reach the last third of cereal in the bag, you're left with nothing but shattered remnants of what used to be. At least with a bag of chips, you have the choice to skip the tiny crumbs or not. It's a little harder with cereal, especially when it's mostly dust that flies right into your bowl.

How To: Ditch Your Doorbell for This Front Door RFID Lock That Lets Whoever You Want In (Whenever You Want)

Hate answering the door, but don't trust your friends with a set of keys? This RFID front door lock made by Steve Pomeroy will solve all your party-hosting problems. It reads the RFID tags in his friends' public transit cards and decides who's allowed in based on "groups" that Steve defines. And I have to say, it's also rather stylish. It's controlled by an Arduino serial console and a custom Android app to add and remove cards. The reader can store 50 or 100 tags at a time and allows 7 diffe...

How To: Animate in Adobe Flash

Step 1 Launch the Adobe Flash program and select “Flash File (Actionscript 3.0)” under the “Create New” menu. Change the workspace layout to “Essentials” by clicking on the drop-down menu in the upper left of the top menu bar.

How To: Have Strong Healthy Nails

Do you want strong, healthy nails? With just a little time and basic care you will find that you have fingernails that others admire. Growing strong, healthy fingernails can be done with just a little time and care. One of the keys to healthy nails is to make sure you get enough protein in your diet. Take time to think about your nutrition. Are you eating enough protein? Even if you are a vegetarian you can get plenty of protein with beans, nuts and tofu. Also, are you drinking enough water? ...

How To: Do a grass silhouette effect in GIMP

In this video, we learn how to do a grass silhouette effect in GIMP. First, draw a black mound and then close off your selection. After this, turn the path into a selection and fill it in with a black color. Next, select your smudge tool and use a small circle brush. Set the rate up to 95, depending on the length of grass you want. Now, use your mouse to push up on the mound and you will see wispy pieces of grass form where you are moving your mouse. Cross them over and cover as much of the a...

How To: Create a 3D model of an X-Wing in Blender

The X-Wing might be the single most famous spacecraft ever depicted on screen. This two-part video explains, in great detail, how to make a 3D model of the iconic starfighter using the 3D modeling software Blender. If you've ever wanted to make a digital recreation of the epic space battles from the Star Wars films, watching this video is one important step on your path to success.

How To: Make cream cheese brownie cupcakes

In this video, we learn how to make homemade cream cheese brownie cupcakes. Start with putting a package of pre-made brownie mix inside of a mixing bowl. Now add in 3 eggs, 1/4 c water and 1/3 c of oil and mix until it's well combined. Once finished, pour batter into a cupcake pan with cupcake liners. Now, to mix the filling, grab an 8 oz package of cream cheese and mix it with 1 egg. Then, add 1/3 c sugar, 1/8 tsp salt and beat it with a mixer. Add 6 oz of chocolate chips into this mix then ...

How To: Replace a shower drain cover

To replace your old rusty drain cover. First, some masking tape over drain cover, to prevent screws from falling into drain. Sweep debris away, as so not to clog up the hole. Remove old shower drain cover to measure, take it to the store, to get the exact size. It's best to take along the screw too, just in case there isn't a screw thats of the same length. Chip away debris from old drain cover, as to make new drain cover fit in easily. If you follow this video, you'll able to replace your ol...

How To: Cure the slice in golf with the bottle drill

This video on golf will show you how to correct the Over the Top Swing Path by the bottle drill. It is presented by Blake Famularo, a PGA apprentice. If you are troubled by your nasty slice, you can correct it by this bottle drill. Put an empty plastic bottle about four inches right of the ball and two inches over the ball. What this will do is if you are coming over the top, you will hit the bottle bang on. Blake demonstrates this. To correct this you need to come from the inside. If you do ...

How To: Restore your computer in Vista to factory settings

Here, you'll be shown how to revert your Windows Vista computer back to its factory settings, if you get stuck with a bad virus or anything else like that. Make sure to back up all of your important data before you decide to go back to the original factory settings, as you don't want to lose that precious data. After a quick backup, we'll run through the options from start to finish. We will run through a few restarts of the system, and then show you the easy path to getting your system back ...

How To: Make a raw food alternative to nacho chips

Kevingianni shows you how to make some nacho cheese bites for your parties. These are a healthy alternative to nacho platters. Take cashews, peppers, garlic, nutritional yeast and turmeric for color. Mix your ingredients together and refrigerate. Make nacho bites by adding lettuce to a meatless filling adding some vegetable toppings and garnish. Enjoy at a party with friends for this simple raw cook-less meal. It's a quick recipe but you do need a food processor and a heavy duty blender to bl...

How To: Relax to get pregnant

Just relax to get pregnant? Could it really be that easy? The truth is that your fertility suffers when you are stressed, so if you are trying to get pregnant a little bit of relaxation can help fend off infertility and speed your path to pregnancy.

How To: Do hatha yoga

Hatha yoga combines breathing exercises and yoga poses to prepare the body for meditation. Learn how to practice Hatha yoga in this yoga video. Take action: balance mind, body, breath, follow 8 limb path, and honor your body. Cindy Mastry, the instructor of this how-to video, has practiced yoga since the age of eight, and also has a background in Jazz and Ballet. Active in the fitness industry for nearly twenty years, she teaches aerobics, kickboxing, and yoga at many fitness centers in the T...

How To: How to use a mala (Buddhist or Hindu rosary)

Learn how you can use a mala and the benefits of counting with a mala with this how to video. While you are sitting in meditation you can use the beads to count inhale and exhale. If you become focused on a certain path then you will have mantras to recite. The benefit to counting on a mala is that you are able to gauge the time that you have been sitting in meditation. Often times our mind wanders, we get frustrated or "fidgety" and wonder "Is it over yet?" But with a mala, you know how long...

How To: Chip and putt

In this video series, our expert Jay Golden will teach you how to putt and improve your short game. Having a great drive like Happy Gilmore doesn't mean you know how to get that ball in the hole. Jay will show you what to do when stuck in the sand, when your ball rolls down the green to the rough, or when your ball is just inches from the green and you can't decide what's next.

How To: Buy a rake

Dr. Rick looks at a new type rake. When buying a rake look for something lightweight, something made of aluminum. That way there are no splinters and it is easy to handle. This rake has a nice soft place at the top and at the base where the hand fits, thus fewer blisters. Where it picks up stuff it's curved so when pressure is placed the rake folds back and is effective at moving grass clippings, wood chips or anything else.

How To: Install a heat sink for a CNC router

A CNC router machine is probably the most useful tool a hobbyist can own, but the price for a CNC machine on the market is way more than the average hobbyist is willing to spend. You can build your own CNC with very basic tools, little knowledge of machinery, mechanics, or electronics, but be warned, these machines are inherently dangerous, so wear the proper protection and use common sense. At the very least, read the instructions and precautions on every tool you use.

How To: Make Star Wars Death Star Peanut Butter Cups

Hello and Welcome to In the Kitchen with Matt, first of all, I am a big fan of Star Wars, and I LOVE Peanut Butter Cups, so in this episode we are making Star Wars Death Star Peanut Butter Cups. These treats are super creative, easy to make, and are sure to impress your friends and family that are Star Wars fans. If you have any questions or comments, put them down below and I will be sure to get back to you. Enjoy!