Clean Fuel Search Results

How To: Remove TouchWiz on Your Galaxy S6 for a Clean, Stock Android Look

When the Galaxy S6 hype-train was building momentum ahead of the phone's release, many reports had Samsung cutting back on its much-maligned TouchWiz skin. In the end, these reports were either highly exaggerated or entirely fabricated, because while not as egregious as previous devices, Samsung's signature bloated UI and duplicate apps are definitely present on the Galaxy S6.

How To: 12 Things Cheap Vodka Is Good for Besides the Obvious

The origins of vodka are shrouded in mystery, with both Russia and Poland laying claim to its invention. Some say Genovese merchants brought vodka (then known as aqua vitae, or the water of life) in the late fourteenth century to Russia. For many years, vodka wasn't just an alcoholic beverage: it was also consumed as medicine.

How To: Pierce your lip at home

In this video, we learn how to pierce your lip at home. Start off by numbing the area with ice cubes, then grab a clean and sharp object and poke it through the area. When it's inside, leave for a couple of minutes, then use a piece of ice to keep the swelling down. After this, grab the jewelry and place it through the lip after you clean it. Make sure you don't give the piercing any time to close in between when you pierce it and when you place the jewelry in. When you're done, remember to k...

How To: Properly clean skateboard bearings

In this tutorial, we learn how to clean skateboard bearings. You will need: a socket wrench, a dirty skateboard with dirty bearings, super glue, rubbing alcohol, and an empty glass jar. First, use the wrench to remove the bearings from the skateboard. After this, pour the alcohol into the jar, then drop the bearings inside. You can also drop in other parts that need cleaning if they fit inside the jar. Now, place the lid of the jar on and shake it for about a minute. When finished, let the so...

How To: Keep a dust mop clean

If you’ve gone through one too many dust mops then you might want to try preserving your new dust mop. By placing a stocking over the mop portion you will be able to keep this mop looking newer for a longer amount of time.

How To: Clean a laptop screen

A dirty laptop screen can be distracting and make it difficult to see what your are trying to work on. Don’t suffer though this for another moment. With products you have at home you can get that screen looking like new.

How To: Clean and dress a goat for BBQ

A certified butcher demonstrates how to slaughter and dress a goat for the grill. This step by step guide shows how to go from a live goat to a barbecued goat meal. Watch this video butchering tutorial and learn how to skin, drain, and clean a goat for the BBQ.

How To: Fix a lawnmower

Are you having trouble balancing the cutting deck of your small engine lawnmower? Our expert will teach you how to do this and many other things including careful removal of the engine’s cutting blade. You will also see how to sharpen the blade and reinstall it safely and efficiently. Watch as our lawnmower maintenance expert removes and reinstalls a carburetor on a small engine lawnmower. Learn how cleaning the carburetor can improve the working mechanism of your lawnmower and see first hand...

How To: Change the engine oil in a Chevy truck

In this tutorial, we learn how to change the engine oil in a Chevy truck. To start, you will want to place your car up on a secure jack so you can get underneath it with ease. Next, find the oil can and drain plug underneath the truck and use a wrench to remove the bolts around them. Now, place an oil pan underneath the drain plug and let the oil leak out into this until there is no more left. Next, clean off the bolt that is used for the drain plug and remove the filter from the underneath o...

How To: Airbrush a cake

Have an airbrush machine just for baking. Be certain that it is always clean. Cover the surface where you will be working as the color will fly. Cover around the cake and behind the cake. You can use newspaper, butcher paper or a disposable tablecloth. Pressure, angle and speed are very important when using an airbrush. It is best to practice. The more practice, the more comfortable you will become with the airbrush. Draw what you are going to put on the cake to use as a guide. Put just a bit...

How To: Make pizza dough and style with your favorite toppings

Chef Hubert Keller is known for his ingenuity in cooking, like when Frank Sinatra came into his restaurant and ordered something not on the menu — a pizza. Quickly, he had to come up with a great pizza recipe and this is what's come of it. Check out the recipe for this mouthwatering pizza from Chef Hubert Keller. You learn the whole process, from dough to sauce to baking.

How To: Make a mold for a carbon fiber part

The website carbonmods.com shows up how to make mold for carbon fiber parts. Find a place you would want to put the boards to proceed with the action. Then take the shaping clay and put all around the edges. Cut off all the excess clay to become smooth and lay it out. The next step is waxing. Wax the board about five times, resting five minutes within each wax. apply the blue fluid to clean off buildup. It takes about 20 minutes to dry. To get the surface dry, mix gel and hardener in the same...

How To: Make simple homemade toffee crunch crepe cake

Simply Made demonstrates how to make a toffee crunch crepe cake. First, assemble the ingredients for the crepes including 1 1/2 cups of flour, 1/4 of a cup of granulated sugar, 1/4 of a teaspoon of salt, one can of evaporated milk, 1/2 cup of water, four eggs, 1/4 cup of melted vegetable shortening, and two teaspoons of vanilla extract. Add the ingredients to a blender and mix for ten seconds. Pour the mixture into a container, cover it, and let it rest for 30 minutes. Set the stove to medium...

How To: Cover parts in carbon fiber by skinning or wrapping

Prepare a chocolate cream roll. And into your whip topping, put in one teaspoon of vanilla extract, about a cap full. Stir the whip, the vanilla removes the packaging taste. Spread the whip all over the cake, nice and thick. Clean out the edges and round it out. With a fork, drag the prongs across the top of the log. And all around the surfaces. With a knife, spiral out the ends of the log. Start in the center and slowly spiral out. Dust the top of the cake with cocoa powder, then do the ends...

How To: Make a handkerchief mouse

First of all you need a handkerchief or a cloth napkin. Make sure that it is clean for use. Now start by folding the two opposite corners together. This shall make a triangle. Now you have top fold the two middle bits so that they overlap at the center. Now start rolling them together upwards. It is very important that you are rolling them very tightly. This shall make the body of the mouse solid otherwise it may fall apart. When you have made a solid roll then fold the two ends upwards as sh...

How To: Bathe a your gentle newborn baby

How to Bathe a Newborn Baby Patty Siegrist shares some tips on how to bathe a newborn baby on this BabyCenter video. Set up for the bath by setting the room temperature to 74 degrees 15 minutes before the bath. It is safe to bathe a newborn in a tub after the umbilical cord stump has fallen off.

How To: Make farmer's cheese with Chef Janie

In order to make Farmer’s Cheese at home, you will need the following: a Dutch oven, a plastic or wooden spoon, 2 pints of whole milk, a colander, cheese cloth, 1 cup of buttermilk, butcher’s string, spatula, 2 tsp of lemon or juice or vinegar, and ¾ tsp of salt.

How To: Install a pond skimmer

Install a pond skimmerThe most critical steps to installing a skimmer are the water level and attaching the liner to the face plate with a water tight seal. The pond should be rocked in. The skimmer needs to be level from front to back and side to side. That's critical. Optimum water level is approximately 3/4 inch down from the top of the steel face. Use the level (tool) to determine the water level on the face plate. It's important to have the weir door work effectively. Prepare the area fo...

How To: Make your own greeting card

This video demonstrates how to make your own Greeting Cards at home. You will need the following: water color paint in bottles with sponge tip applicators and spray, ruler, adhesive, solid color paper stocks, patterned paper, a rubber stamp, stamp cleaning products, a bone folder, and a trimmer.

How To: Purify water 3 different ways

Purify water 3 different waysThere are three water purification methods demonstrated: Chlor floc tablets, 2% tincture of iodine and a MSR hand filter.Gather water into your plastic bottle. Add one chlor floc tablet to one liter of water. Close the top and shake the bottle for one minute. Wait seven to ten minutes. The floculation agent in the tablet takes the dirt out of the water so that it can be separated. Strain the water using a bandana over the cup to trap all loose sediment. The water ...

How To: Land a basic ollie on a skateboard

Ollie' is one of the most basic tricks. 'Ollie' is done in a forward direction. You have to stand with your right foot forward and the left foot in the back to move in the forward direction. If you are regular then you have to stand in the opposite way as shown. There are two different types of 'Ollie'. In this one you have to snap the tail down to create a pop. You don't have to put in a lot of force into it. At the same time your right foot must be in the middle or a little forward on the s...

How To: Put together a fall flower arrangement with roses

The flower god demonstrates how to arrange a beautiful rose arrangement for your fall table. A dozen yellow roses, greenery and safflower are used to construct this masterpiece. To begin you need a vase filled with fresh clean water. The flower god shows how to lace the stems of the greenery in and out of one another. The laced stems are then placed in vase and eucalyptus is placed throughout vase giving a cascading effect. Next it is time to prepare the roses. Thorns need to be removed off t...

How To: Make a mini pumpkin teapot for a dollhouse

The person in this video is teaching us how to make toys with the help of polymer clay. As you can see the video you can say that the person there is a girl. This lady is teaching to make a teapot to her daughter. Her hand is focusing the camera. First she makes a little ball with the help of polymer clay. Then she made few lines on that ball and press that ball slightly on the top. Then she takes another piece of clay and presses it but that one is too small. Then she use another on quit big...

How To: Arrange a dozen red roses for Valentine's Day

Making a rose arrangement is not difficult, but there is some skill to it. In this video tutorial from Fresh Flower Ideas, learn the tips and tricks of creating an arrangement with a dozen red roses for Valentine's Day. In this tutorial, a dozen red Freedom roses are used, but you can use whatever grade and type you want. You will also need sprigs of babies breath, leather leaf, and tree fern. To begin, clean off the stems and the rest of each rose. Add once piece of leather at an angle in th...

How To: French braid hair from a zig-zag part

Cute Girl Hairstyles shows you how to create a French braid hairstyle for your hairstyle. Firstly, divide the long hair into two parts with a zig-zag parting on the top of the head. Keep one half of the hair in a ponytail to keep it out of the way. Wet the hair down, and take a small section of the hair. Section that part into three and repeat. Cross the first piece with the second piece, and then cross the third piece over (braiding). Pick up hair and add it to the left lock and repeat. You ...