Colorful Add Ons Search Results

How To: Make almond arugula pesto

Chef John from Food wishes shows the steps to make almond arugula pesto. An excellent summary is given below. Take a bowl of salted water and boil it. Add the arugula leaves (try to find bigger leaves for strong aroma) to the water and let it boil. Transfer the leaves to ice water and squeeze it out to get it ready. Use a blender and add some cloves, raw almond, olive oil and the leaves into it. Blend it for about two minutes, but do not over blend it. Transfer the blend to a bowl. Finally ad...

How to Make Indian food: Arvee

This video teaches you to make a vegan Indian dish, Arvee. In English, Arvee is called "Tara Root." First peel the tara root, then slice thinly, wash and drain for an hour. For the spices, you will need a teaspoon of salt, a teaspoon of Achar Masala spice mixture, a quarter-teaspoon of turmeric, a quarter-teaspoon of grated ginger, two green chillies, thinly sliced, and a pinch of dried cumin seeds. You will also need canola oil. Take a large pressure-cooker and add 4 tablespoons of canola oi...

How to Make Indian food: Fish kabab

The lady in the video teaches how to make Fish kebabs. White firm fish, such as cod fillets are used to make the kebabs. One teaspoon of mint garlic, one whole jalapeno pepper, three cloves, two cut up small potatoes, salt, chopped cilantro, and a blend of Indian tart spices. The fish is cooked in a pressure cooker, and the potatoes are added. The green peppers are added, and the garlic is also added. The three cloves also go in, with half a cup of water. A level teaspoon of salt is added. Th...

How To: Make Indian dum aloo (vegetarian)

Anuja and Hetal from Show Me the Curry! teaches how to make a vegetarian Indian dum aloo. 2 lbs. Baby Potatoes, boiled and peeled, 2 Tbsp Oil, 1 inch piece Cinnamon Stick, 1 Bay Leaf, 6 Whole Cloves, 1/4 tsp. Asafoetida, 2 tsp. Ginger, minced, Salt, Red Chili Powder, 1 tsp. Roasted Aniseed Powder (Star Anise), 2 tsp. Roasted Coriander Powder, 1 tbsp. Paprika, 1 Cup Yogurt, 1 Cup Water, Cilantro and Ginger (Julienned, cut into matchsticks); for garnishing. Preheat oven to 400 degrees Fahrenhei...

How To: Add extreme contrast in Photoshop

Oftentimes, a photo may not capture the true vibrancy of color in real life, but Photoshop can fix that. Photos with lots of color can be given even greater hue saturation by adding extreme contrast in Photoshop. By using multiple effects, including overlay blend modes and noise across multiple layers, a picture's color intensity can be made more bold with these techniques. By following the steps in this video, colors can be made more vibrant using extreme contrast with Photoshop software.

How To: Find a common denominator to add fractions

In this video the tutor shows how to add fractions. Fractions are numbers in the form a/b, where a and b are normal numbers. He shows that to add two fraction we need their denominators to be same. If they are not same we need to take their least common multiple and change the fractions so that they have equal denominators. Now the numerators of these fractions can be directly added and the resultant fraction contains this numerator along with the original common denominator. Now this fractio...

How To: Add text to a line in Photoshop

This video is a highly informative tutorial on how to add and control text to a line in Photoshop. According to the author of the video, most people can add text to paths in Photoshop, but are often in the dark about how to manipulate. This, as demonstrated by the author, is quite easy and simple. The tools for path selection, text addition, and various other features which make this particular task very simple are clearly outlined by the author.

How To: Add a window light cast in Photoshop

In this video we are going to light cast a window so we can add more focus to the photos. First take unremarkable photo, then find a window image to transfer and select all Ctrl+a. After that copy it to the previous image. Click layer 1, then select the white space in the window that allows the sun light to pass by using magic tool quick select the part of the window. Delete the layer, after that go to adjustment layer, select levels. Adjust the level so that the color of the window is darker...

How To: Cook Filipino pork sinigang

Heat the pot and put in the cooking oil. sauté the onion until the layers separate. Add the pork belly and cook until the outer part turns light brown. Put in the fish sauce and mix it with the ingredients. Pour in the water and bring it to a boil. Add the taro and tomatoes, then simmer for 40 minutes or until pork is tender. Put in the sinigang mix and chili. Add the string beans (and other vegetables if there are any) and simmer for 5 to 8 minutes. Put in the spinach, turn off the heat, and...

How To: Bake fig bran muffins

This video teaches you how to make fig bran muffins. Begin by greasing your muffin pan. Pour a bowl of bran flakes, then add 1% milk. While the cereal gets soggy, whisk or sift your dry ingredients in a separate bowl: flour, salt, and baking powder. Add applesauce, honey, an egg, canola oil and molasses to the soggy bran flakes and stir. When wet ingredients are combined, add the dry ingredients and mix everything together. Spoon your batter into the muffin tin and bake in the oven.

How To: Make a Pakistani-style samosa

This cooking video is of a Pakistani recipe showing you how to make a Pakistani style samosa. You will need a boiled potato, onion, coriander, red chili powder, zeera, salt, lemon juice, oil, four and onion seeds. (Amounts mentioned on video). Make the dough by adding the flour, oil and the herbs into a bowl and mix thoroughly as shown. Add water to get the right consistency. Mash the potato and add the remaining ingredients for the filling. Mix well. Make the samosa sheet using a piece of do...

How To: Make Thai spring rolls

Place 2 Tbsp. oil in a wok or large frying pan over medium to high heat. Add garlic, galangal (or ginger), shallots, and chili. Stir-fry until fragrant (about 1 minute). Stir-frying Tip: Add a little water to the wok/pan when it gets too dry instead of more oil.

How To: Simulate water reflection in Photoshop

This Photoshop describes how to simulate the water reflection on scenery. First, create an image and add it to any photo. The added image should not contain water in them. The video shows displacement map to create the ripple effect. It is highly saturated and pure.

How To: Add a watermark to photos in Photoshop

The PhotoshopUniverse team effectively teaches a method of adding a watermark to an image, as a security feature to make it harder to copy or steal. Instructions are simple and easy to follow, using as an example a photo of two girls that one might have in his or her family album. Using Photoshop, the text that will become the watermark is added, rotated and patterned across the entire image. To finalize the watermark, the opacity is edited to a desired value so that it does not interfere wit...

How To: Add an infrared effect to photos in Photoshop

This video tutorial is about adding an infrared effect to an image using Photoshop. First of all, open the image to which you wish to add the effect. After that, create a duplicate layer. Then go to the image option and click on it. A drop down menu appears. From that menu, click on adjustments and from that, select the option channel mixer. In the small window that appears, first tick the monochrome option. The idea of the channel mixer is that the total percentage of the colors must add up ...

Cook Indian shrimp biryana: a Goan rice dish

Watch this great cooking video on how to cook Indian shrimp biryana, which is a Goan rice dish. If you’re tired of the same old biryanis, try this Goan-inspired recipe for shrimp (prawn) biriani. With the creaminess of coconut milk and freshness of mint, it’s the perfect combination!

How To: Add a flange accent to your quilt

A quick tip on adding a flange accent to piece your quilt. A flange is a one inch strip of fabric that you fold in half and fit into the border to add a delicate accent to your quilt. This layout provides the groundwork for sewing flanges into a quilt.

How To: Ink and chalk embossed paper to add color

Paper embossing stamps a design into the paper, but doesn't allot for any color. Ink and chalk can both be applied to an embossed design for color and to bring out the shape of the embossing. Ink can add vibrant color, while chalk adds a soft finish to the embossed design. Watch this video tutorial and learn how to use ink and chalk on embossed paper.

How To: Add photos to your MobileMe Gallery with iPhone

If you're out and about, and you take a great photo with your Apple iPhone, you can add it to your MobileMe Gallery with just a few taps. This video tutorial from Apple will show you it's as simple as clicking "Send to MobileMe". Then there will be beautiful pictures for all your loved ones to see, right from the Internet.

How To: Add narration in iMovie

Adding narration or voiceover to your movie is an excellent way to enhance your story. You can use the built-in microphone on your Mac, the built-in microphone from a connected iSight camera, or an external microphone connected to your Mac.

How To: Import movies to Garageband

Adding music to iMovie projects is a great way to create ambiance for your movie. With Garageband, you can create your own music for your movies. You can also add sound effects and enhance the sound recorded with your movie. When you're finished, you can export your movie to share it in a number of ways.

How To: Fix or change song info in iTunes

When you add accurate information about each song, it'll be much easier to browse and find songs in your library. Choose a song, go to the file menu, and click "Get info." You can even add comments of your own to a song's information. These are great tools you can use to organize your music.

How To: Use LiveType to create titles in Final Cut Express

Use LiveType to create professional titles in your Final Cut Express project. Match the properties to those of your Final Cut Express project, add text, choose a font, and format your text using the inspector. The title shows up on the canvas and in the timeline. You can also add sophisticated backgrounds, effects, and animation.