The Chevy Aveo is a small efficient car, but that doesn't mean you have to go without a trailer hitch. See how to install a custom fit trailer hitch to the Aveo and carry a Class I bike rack or tow a small trailer.
If you are going to be towing a trailer, or using auxiliary lights with your Dodge Ram 1500 full size van, you are going to need to install a T-One wiring harness. This installation could not get any easier, if you know how to use a plug and some zip ties, you can do it. This video shows where to locate the needed plug and how to test the wiring to make sure it works properly.
f you are going to be towing a trailer, using an enclosed cargo carrier with lights, or if you want to use an electrical accessory (such as lights, or a winch) you are going to need to add a wiring harness. This video will show how to install a wiring harness on a Chevy Express full size van. It also includes some helpful tips about installing the ground wire, using dielectric grease, and installing a bracket to hold the wires so they are protected from damage.
If you are going to use your Subaru Forester to tow, carry a cargo carrier that has lights, or if you have accessories that need power, you are going to need to install a T-One vehicle wiring harness. This video will demonstrate the simple installation of the harness on a 2007 Subaru Forester and includes tips showing which panels need to be removed, where to access the needed plugs, and good locations for the wires and module box.
This video is a good example of just how easy it can be to install your own custom fit hitch. To install the hitch on a Chevy Express full size van, drop in the bolts, torque them down, and you are finished.
An installer shows how to temp set a hitch in place so that you can drill holes in the correct location on the spare tire pan.
In this auto repair video series, learn how to install custom custom exhaust on your car from custom car restoration expert Doug Jenkins. Doug and his crew of mechanics and car restoration experts will demonstrate how to replace the exhaust system on a car and teach you safety tips for replacing an car exhaust system.
A clever driver from Cairo, Egypt has revolutionized parallel parking with a fifth wheel built into his car. The extra wheel in the rear is perpendicular to the others and under the trunk (which looks like it's actually stored in the trunk compartment), and can be raised and lowered for easy parking in tight spots. You can even ditch that old, rusty tire jack and swap out a rear flat tire in record time.
This automotive customization tutorial shows you a method to try to save gas by deactivating a fuel injector. Get your car to run on three cylinders instead of four and save gas. Be careful, you will need to remap your vehicle's ECU or live with the check engine light being continuously on. This method of deactivating a fuel injector to make your vehicle run on one less cylinder will save gas, as long as your car still runs.
In this scooter engine customization tutorial you will learn how to install a 107 SEF cylinder with water cooled head in a Honda Elite DIO scooter. Modifying the stroker cylinder is a major modification so you should have some mechanical experience. This is part of the process of installing a stroker cylinder kit in a Honda Elite DIO scooter.
This moped customization tutorial shows step by step the removal of the old carb and putting on new Mikuni 28mm flat slide racing carburetor in a Honda Elite 50 DIOS scooter. If you want to get more juice out of your moped motor, watch this series and learn how to install a race carb.
Learn how to install a custom air intake on your car or truck, from removing hoses to installing the silicone coupling, as our expert mechanic explains in this free auto-maintenance video series.
Need to clean out your brake booster lines? Sea Foam is the product to do it with and this video shows you how.
In this auto repair video series, learn about installing a Chevy engine from Doug Jenkins. Doug and his highly trained staff of expert mechanics will demonstrate how to install a Chevrolet engine in a Ford T-Bird.
In this series of car restoration videos, our body shop owner and hot rod designer shows you how to restore the exterior of that old classic car back into like-new condition. He demonstrates ways to expose rust, grind it away and then repair the body section which rusted.
Sometimes, changing the time in your vehicle can be tricky. You have to lug out the owner's manual and try to navigate through all the technical talk, but if you own a 2010 Ford Fusion, this video will show you how to change the time, step-by-step. Setting the time on the clock doesn't have to be difficult.
The headlights in a 2010 Ford Fusion can easily be customized to your needs. For the most part, keeping the headlight settings in "automatic" is the best way to go, but if you need to switch them for some reason, it's pretty easy, just like any other car. See how. Also, see how to turn on the high beams and turn them off. You can also flash them.
The 2010 Ford Lincoln MKX can do plenty of things, and a lot of those features are geared toward comfort. Like your seats. You can position your seats exactly how you want them. And you can save that position so you can always come back to it later, just in case someone messes with your comfort zone. Watch and see how to set your memory seats on a 2010 Lincoln MKX. This will also work on a few other cars as well.
Now is the time to put the piston and cylinder to the case. Seals have been installed and now comes the top end. So watch and see how to mate the 54mm cylinder to the stroker crank on the Honda Elite DIO scooter engine project.
This scooter engine modification tutorial gives you some tips on tools and methods for making the cylinder ports smoother in a Honda Elite DIO scooter engine. If you are modifying your scooter engine or doing major engine customization, you may want to port the cylinders as shown in this video.
This engine modification tutorial gives some tips on installing or taking off your two stroke pistons from the crankshaft in a Honda Elite DIOS scooter motor. Always keep the parts clean and take your time and do the job right. Remember that the piston always goes on with the arrow on the piston crown, pointed towards the exhaust port. This modification may seem daunting at first, but with the two stroke piston installation tips given in this video it should become much easier.
ICELED UFO is a complete automotive underbody lighting kit consisting of four ICELED tubes, an advanced Electronic Control Unit and a wireless Infrared handset that allows the entire system to be remote controlled from inside or outside the car. The ECU can independently address all the pixels in the tubes allowing them to project patterns ranging from complex all the way down to a single color on the ground. The ECU also provides ICELED data for synchronous control of additional ICELED light...
These car videos offer great restoration tips for your vintage cars. This how to video demonstrates who to install a custom seat belt retractor system in a 1964 Ford Galaxy. The seat belt is placed up near the roof so that it can remain hidden.
If you need to quickly shape the Styrofoam blocks on your custom built car, build your own hotwire cutter out of an old battery charger, some scrap wood and a piece of NiChrome wire from the hobby shop.
See how you install these unique attachments perfect for your vehicle.
Take a look at how Nutz are mounted on a car - the ultimate bling for your vehicle.
Learn how to replace the factor airbox with a cone filter intake - this should flow more air through your engine to add a bit of horsepower and better performance.
This is a folding basket adapter for two inch trailer hitch mounted cargo carriers and this video explains how to use it in conjunction with your trailer hitch and your cargo carrier.
This video shows you how easy it is to use an OSI swinging trailer hitch mount bike rack. Learn how to put bikes on it, secure and lock them.
It's almost as easy as it sounds - just don't forget to secure the cover to the spare tire by the two hooks. This video shows you how to put on a spare tire cover.
An installer shows how to drill out an existing frame hole to make it larger to accommodate the installation of a trailer hitch.
This video shows how to use fish wire (or lead wire) to assist in then installation of a trailer hitch. An installer shows how to feed the wire into the vehicle frame, attach the washer and bolt, and then pull the wire through to position the bolt for the hitch installation.
In this series of car restoration videos, our body shop owner and hot rod designer shows you how to restore the exterior of that old classic car back into like-new condition.
In this online video series learn tips and techniques on how to apply window tint to a car from expert window tint specialist Ronald Sanders. He will teach you about tint tools, different shades of tint, how to prep windows for tinting, how to apply window tint, how to heat shrink the tint, how to maintain window tint, and what are some benefits of window tint.
In most states, it's illegal to drive while talking on your mobile phone, but that is easily remedied with hands-free calling. If your cell phone comes equipped with Bluetooth, you can sync it right to your 2010 Lincoln MKZ using Ford SYNC. This video shows you the steps to connecting your phone up in your vehicle. Now you'll have more hands for coffee and cigarettes and donuts.
On the 2010 Lincoln Navigator there's a handy feature called the deployable running boards, which are essentially step bars that automatically deploy when the car door is opened, to help you step inside your vehicle. This video demonstrates how they work, and how you can shut them on or off, because not everybody will find these useful — tall people definitely won't.
Imagine, never needing to unlock your car door with a key. Actually, it's been around for a while, and it's called keyless remote entry, but on the 2010 Lincoln MKS, it's not remote… it's built directly into the side of the car door. It's a number pad with a programmable security code. This video will show you how to unlock your vehicle without even reaching into your pocket! If you have a MKS.
This scooter modification tutorial gives you some tips on how to bolt a velocity stack to a 28mm Mikuni carburetor on a Honda Elite DIO scooter exhaust system. The video doesn't cover the actual install but gives tips on ways to make the connection easier.
The rear window is by far the hardest to tint due to the curvature from side to side and usually top to bottom as well. But don't worry, this video will walk you through the tricks to getting that film to lay flat. NOTE: this strip method is older and will work but is rarely used today - there is a one piece shrink fit method used instead.
This easily installed universal towing mirror will mount to any mirror with its conforming rubber knobs and securing clamps this mirror will attach easily to any mirror you have on your vehicle. This video shows you how.
