This is a perfect craft project for the classroom or to do with the family. Have fun designing your tree and use it as colorful decoration, help learn about trees, tell tails, or as a fun prop to make play theater really come alive.
And then there was light…on your pen. Have a little fun and with a little ingenuity and a couple of matchsticks you can liven up any afternoon by pranking your friends with this magically burning pen.
This video shows you how to section an orange. For this you will need the following: an orange, a sharp knife, a bowl, and a pairing knife. To get started, cut off the top and the bottom of the orange with a really sharp knife. This will give you a flat surface. Cut away the hull of the orange with a pairing knife. Simply, work your way around the orange with your knife.
Making a wooden spear requires a between medium and small thick stick, a rectangular piece of board, a hatchet and a wood clipper. The branches off the stick is removed and thrown away. The stick is clipped at the smaller end. It is then placed on the board and the larger end is cut off with the hatchet, while the stick rotates in a circular motion on the board to remove the outer skin. Closer attention is paid the shaping and cutting of the point of that larger side to get it in formation. T...
In this video tutorial, viewers learn how to make a novelty duct tape bow tie. Begin by cutting a piece of duct tape to the size that you want the bow tie to be. It is recommended about 5-6 inches. Then cut another piece of duct tape the same size and tape it over the sticky side of the other piece. Now fold it about 1 cm down, flip it over and fold it again. Continue folding until it reaches the end. Now pinch it in the middle and tape it to hold the bow tie. This video will benefit those vi...
Chi running focuses on core muscles, integrating body and mind, and long-term performance to enhance the joy of running. In this tutorial, you will learn how to harness your Chi and improve your running technique and overall fitness.
This video starts out by showing the tools needed to build a skateboard kicker ramp: saw, drill, jigsaw, screwdriver, and wood. They then begin to cut the pieces of wood and screwing them together in the shape of a ramp. The instructions indicate to wet the ply board so it will bend to fit the shape of the ramp. They demonstrate how to measure the proper position of the board and screws using a string. They end by cutting the ply board at the proper length to allow the skateboard to life off ...
The video begins with a piece of card/thick paper in front of the person who is making the box. The maker then shows a small box as an example of what the finished box will look like. The maker then takes the top left corner and folds it over so that it is against the right edge of the paper and so the two edges are straight. Then she takes some scissors and cuts the excess paper (the area which is just a single thickness, not double) to leave a folded triangle. Next she unfolds the paper and...
How to make an overall style tank top: To make an overall style tank top, find a tank top you like. Make an incision in the strap to where the overall strap would be. Take a buckle and sew it on. You may also use a desired fabric by tracing your tank top shape onto the fabric, cut it out and sew it all together. For a shortcut, cut an extra piece of fabric and sew it directly onto the tank top strap, before you sew the shoulder seams, and attach the button accordingly. Sew the overall tank to...
This fitness how to video demonstrates beginners level cobra poses. Standing poses along with cobra poses are great for opening the muscles in the lower body. Boost your energy level in the morning with a sun salutation that incorporates the cobra pose.
Home improvement expert Danny Lipford talks about additional closet shelving. See this video tutorial to see how to install additional shelving in an office closet.
Chicken and vegetables Ingredients:
Though apple skins are healthy, some recipes call for peeled apples. These apple peeling tips will show you how to remove the skin safely and efficiently. The first thing that you will need is a sharp paring knife. Now, before we continue, a quick safety tip: Whenever you are using a sharp knife you always want to cut with the blade facing away from you. If you are cutting with the blade toward yourself and you slip you will increase your chances of an accident.
In this series of how-to videos, home improvement expert Amelia Tallman shows you step-by-step instructions on how to install a new power outlet in a wall of your home. She demonstrates how to strip the existing wires, drill holes and properly install a new box for a new outlet. She also shares tips for improving your home by installing insulation using a blower, which should help you save money on energy costs by maintain temperature. By following the advice and techniques shown in these fre...
Keep the kids learning and entertained with this fun pinwheel project. Summer is a great time for family activities, and these Fourth of July pinwheels are a math lesson, craft project and decoration-making session all-in-one.
Summer is just around the corner and those jeans that seemed perfect for winter aren't looking so hot. Put those jeans to use, and make your very own jean skirt. Grab a pair of scissors and a sewing machine and get started.
Vacuum the floor and make sure that the surface is clean and free from anything sticking up out of the floor. This is important so that there are no uneven areas when you start laying the laminate flooring.
A CNC router machine is probably the most useful tool a hobbyist can own, but the price for a CNC machine on the market is way more than the average hobbyist is willing to spend. You can build your own CNC with very basic tools, little knowledge of machinery, mechanics, or electronics, but be warned, these machines are inherently dangerous, so wear the proper protection and use common sense. At the very least, read the instructions and precautions on every tool you use.
A CNC router machine is probably the most useful tool a hobbyist can own, but the price for a CNC machine on the market is way more than the average hobbyist is willing to spend. You can build your own CNC with very basic tools, little knowledge of machinery, mechanics, or electronics, but be warned, these machines are inherently dangerous, so wear the proper protection and use common sense. At the very least, read the instructions and precautions on every tool you use.
A tutorial on an Extreme Card Manipulation (XCM) cut / flourish.
In this video, we learn how to do a flashy croupier cut. First, take your deck of cards and then swing half of the pack to the left with your thumb. Now, grab the middle and pull it over. Now, lift half the bottom of the pack and turn the other pack over. Come back and place the upside down cards in, then grab the top and bottom of the deck so all three decks are still separated. Now, pull away with the top of the deck and flip it over, then bring it on the right hand side of the two decks, t...
In this tutorial, we learn how to make a baby blanket. First, cut out a pattern (you can used old shirts and jackets) and line it against a liner fabric, and cut it out. Now, take the ends of the fabric and sew them 1/2 inch in. Then, sew both the liner fabric and the original fabric together on all the sides that are open and use pins to hold it together while you are sewing other sides. You can do any type of stitch that you like, just make it all your own. When you're finished, you'll have...
Badkider teaches viewers hot to fry deer meat! First, you should clean and wash your dear meat and cut it into pieces. Next, you need to beat eggs in a bowl. You also need to have a separate bowl full of bread crumbs. Now, with your cut deer meat you should dip them into your bowl of beat eggs. Next, you'll want to dip the meat into the bread crumbs, making sure the meat is fully covered in them. Then, in a skillet that has oil, place the meat and fry the meat on both sides. When the meat is ...
We've all had to waste what could have been perfectly good cheese when we cut away the outside edges and corners that have dried out. This is caused by moisture being lost when exposed to air so can get the most out of your cheese by wrapping it well when storing.
Dr. Aris Latham suggests setting standard plans for breaking a fast for most of people that he interacts with because the animal body has been programmed to eat in a certain way. This is necessary to train your body well so as to survive and be healthy. Divide your day into 3 equal parts of 8 hours. Take the sleep part of the day where you deal with the waste in your body and create energy within the body. The next period when you get up is basically when you break your fast when your were sl...
Eeverst isn’t for armatures. If you have the ambition of climbing Mt. Everest you will have to do a lot of preparations including physical fitness work, travel arrangements, not to mention putting aside thousands of dollars to make your dream a reality.
Watch to learn how to replace the blade on a Flymo Hover Compact 330 mower. You'll remove and replace the 33cm Flymo blade on a Flymo Hover Compact 330. If your mower is not cutting properly remember you need a sharp blade for the perfect lawn. We use spacers to adjust the Flymo cutting height. This lawnmower maintenance video includes cleaning and we use a scraper tool to do this.
Filet mignon is always a treat. This delicious cut of beef is so tender, you can often cut the filet with a fork. This how to video shows you how to cook a pan roasted filet mignon.
In this video series, our expert will give you an overview of these and other remedies and tell you how to use them in order to harmonize the cosmic energy in your life to achieve happiness and prosperity.
Master Rafael Negron, 6th DAN Master Instructor, and Jessica Sherlock, 2nd Degree blackbelt. Hapkido is an eclectic Korean martial art that is literally translated as “the way of coordinating energy” or “the way of coordinated power.” Hapkido is ultimately used as self-defense and combines other skilled martial arts with common attacks. he main focus of Hapkido is footwork and body positioning used to employ leverage.
Cassandra, your old lover in Shank, and she's not exactly happy to see you. Alright, so you cut her up a little bit, I mean, she was over reacting, right? She can be a tough enemy if you don't know her pattern of attacks and counter attacks. In this video you will get a chance to see what the best startegy to use against her is, as well as her points of counter attack.
Tired of static cling? You can make your very own dryer balls that will prevent your clothes from having static clean and it only takes some yarn and pantyhose. You can even make scented dryer balls using this method.
You have your gift and a card and now all you need that special cake for mom on Mother’s Day. You’ve tried other cakes now try a hat cake. This festive and spring inspired hat cake is sure to make this year’s Mother’s Day a memorable one.
Summer is coming so start saving your popsicle sticks (or more conveniently buy them from a craft store) to make your very own mini American flag. This is a great activity to take into the class room or just to pass the time on a summer’s afternoon.
Are you on a low-salt diet and need some healthy recipes that are friendly on your taste buds and wallet? This superb video serves up an easy and delicious recipe that will please everyone, whether or not the doctor has advised them to cut down on the sodium. The tutorial, one in a fantastic and free video series, offers excellent tips on how to properly cook your rice, as well as how to dress it up without damaging your health.
This scroll saw pattern tutorial shows you how to work with Corel Draw vector graphics drawing software to create your woodworking patterns. If you love cutting, but haven't tried designing, this video will give you some ideas on how to get started creating your own scroll saw patterns using Corel Draw.
Love coconuts but don't know how to open them up? This how to video demonstrates how to strip a coconut husk in under two minutes. Use a machete and a piece of wood to remove the husk and cut open coconuts.
You need to stop vampires and you love to cook with garlic. Watch this how to video and let the Rookie Cook show you how to peel and cut garlic. Mincing and peeling garlic is so simple you will never buy the bottled kind.
Learn how you can create a pink and white nail design with this tutorial. You will need the following nail polish: 23 Heaven by Sally Hansen Advanced Hard as Nails, White French Tip Nail Polish by Sally Hansen Hard as Nails, and fine and medium brushes.
In this nail art tutorial you will learn how to create a pretty pink nail design. You will need 23 Heaven by Sally Hansen Advanced Hard as Nails, French tips white nail polish by Sally Hansen Hard as Nails, fine and medium brushes.