Cut Energy Search Results

How To: Cook with pumpkins in the oven

In this video, Curtis Smith from Southwest Yard & Garden is joined by Bernadillo County Home Economist Patricia Aaron to talk to us about cooking with pumpkins. There's probably no vegetable that anounces the arrival of fall like a pumpkin. When you're using a pumpkin to make piesm cakes, and so forth, you want to choose a medium-sized one. Smaller pumpkins can make good side dishes. Bear in mind, it takes a bought a half pound of cooked pumpkin to make one serving. Here, we're using a nice m...

How To: Make German paper stars for Christmas

This video shows how to make German paper stars for Christmas.Step 1. Measure and cut strips of paper.Step 2. If we are using shorter pieces of paper glue the strips together.Step 3. Weave the strips.Step 4. Starting with the upper left strip. Fold down. Repeat all the way around. Skipping every other strip.Step 5. Tuck the last strip under the first strip.Step 6. Flip and repeat. If there is a trouble getting some of the strips to go under the other strips cut the ends at an angle.step 7. Fl...

How To: Make wool mittens

Olivia shows how to make ‘Woolen Mittens’ in this video, by recycling an old sweater! She begins by washing an old sweater in cold water. After washing, she puts the sweater in a dryer at high heat mode, to shrink it. The washed, dried and shrunk sweater is then placed on a table. The required length of the mitten is decided, taking care that the bottom end of the sweater shall be placed at the point where the mitten ends on the arm. The arm is then placed on the sweater and a mark is made ab...

How To: Open a coconut with meat cleaver

Step 1. Understand that opening a coconut requires a considerable use of precise force. Because you are using a knife or cleaver, it is very important that you keep your fingers and other body parts away from the blade. Step 2. Clear off a stable cutting surface. Step 3. Begin scraping off the white, sinewy upper layer around the pointed top of the coconut, using your knife. Scrape off the top layer until a brown ridge is revealed around the base of the pointed top. Right where this brown lay...

How To: Tile a custom ceramic tile shower

Start by putting tile backer board tape on all the joints on the wall board and then put mortar over the backer board tape. Let the mortar dry and then you can begin the tile job. Install a ledger board at the base of the shower stall about one tile high. Draw some vertical and horizontal lines on the wall to help keep the tile going straight. Also use tile spacers to help keep the tile going straight. Mix up some thin set mortar. Put the thin set mortar on the wall. Apply it with the flat si...

How To: Cook a honey-baked ham

Honey-baked ham is delicious, but it can be expensive and challenging to prepare. Fortunately, it doesn't have to be. If you want to cook a delicious ham without paying for the pre-made honey glaze and the preparation, here’s an easy way to do it yourself.

How To: Make a breakable baseball bat movie prop

There are plenty of films out there with baseball bats, but if you want your bat to explode on impact, you'll have to make it yourself. A smashable baseball bat is perfect for any gangster flick or sports movie. Watch this video tutorial to learn how to make a breakable baseball bat movie prop.

How To: Make grilled eggplant

Enjoy some eggplant at your next barbecue. If there's any left over, blend it with a little lemon, garlic, and salt and you've got a tasty baba ghanoush. Watch this video to learn how to make grilled eggplant.

How To: Cut a boy's hair

It’s easier, quicker, and cheaper to cut your child’s hair than to bring him to a stylist. So why not just do it yourself? Learn how to give a male child a haircut, at home. This is a cost effective tip that will help you save money.

How To: Install the software for a CNC router

A CNC router machine is probably the most useful tool a hobbyist can own, but the price for a CNC machine on the market is way more than the average hobbyist is willing to spend. You can build your own CNC with very basic tools, little knowledge of machinery, mechanics, or electronics, but be warned, these machines are inherently dangerous, so wear the proper protection and use common sense. At the very least, read the instructions and precautions on every tool you use.

How To: Cook stuffed Maltese chicken breasts

This recipe comes to us from Mario Schembri, head chef at Ta´Frenc on the island of Gozo. Watch this how-to video cooking lesson to learn how to make stuffed Maltese chicken breasts. Serve the stuffed chicken breasts with a button mushroom sauce and a side of vegetables.

How To: Install a heat sink for a CNC router

A CNC router machine is probably the most useful tool a hobbyist can own, but the price for a CNC machine on the market is way more than the average hobbyist is willing to spend. You can build your own CNC with very basic tools, little knowledge of machinery, mechanics, or electronics, but be warned, these machines are inherently dangerous, so wear the proper protection and use common sense. At the very least, read the instructions and precautions on every tool you use.

How To: Make a stepper driver power supply for a CNC router

A CNC router machine is probably the most useful tool a hobbyist can own, but the price for a CNC machine on the market is way more than the average hobbyist is willing to spend. You can build your own CNC with very basic tools, little knowledge of machinery, mechanics, or electronics, but be warned, these machines are inherently dangerous, so wear the proper protection and use common sense. At the very least, read the instructions and precautions on every tool you use.

How To: Make the stepper motor driver for a CNC router

A CNC router machine is probably the most useful tool a hobbyist can own, but the price for a CNC machine on the market is way more than the average hobbyist is willing to spend. You can build your own CNC with very basic tools, little knowledge of machinery, mechanics, or electronics, but be warned, these machines are inherently dangerous, so wear the proper protection and use common sense. At the very least, read the instructions and precautions on every tool you use.

How To: Build the y-axis for a CNC router

A CNC router machine is probably the most useful tool a hobbyist can own, but the price for a CNC machine on the market is way more than the average hobbyist is willing to spend. You can build your own CNC with very basic tools, little knowledge of machinery, mechanics, or electronics, but be warned, these machines are inherently dangerous, so wear the proper protection and use common sense. At the very least, read the instructions and precautions on every tool you use.

How To: Install a cross dowel to adjoin wood for a CNC router

A CNC router machine is probably the most useful tool a hobbyist can own, but the price for a CNC machine on the market is way more than the average hobbyist is willing to spend. You can build your own CNC with very basic tools, little knowledge of machinery, mechanics, or electronics, but be warned, these machines are inherently dangerous, so wear the proper protection and use common sense. At the very least, read the instructions and precautions on every tool you use.

How To: Make an Escher-esque tessellation

In this video, we learn how to make an Escher-esque tessellation. Start with construction paper, then make an equilateral triangle onto it. Next, make a shape on one end of the triangle, making any shape you would like. Now cut your shape out, then trace it onto another piece of construction paper. After this, rotate the shape over on the second piece of paper, then trace it out again. The lines should match up equally. You will then have one side left, which you will use to make any shape yo...

How To: Make a mermaid birthday cake

This video shows how to make a mermaid birthday cake that would be perfect for a little girl. To make the mermaid take a fashion doll, or a Barbie doll, and wrap her legs in plastic wrap. Now cover her in green and blue fruit roll-ups to form the mermaid's tail. You will need about three strips to make the entire dress and tail. The fruit roll-ups will stick to itself. For the cake you will need two 8 inch rounds and a smaller cake baked in a custard cup. Make sure the cakes are flat on top, ...

How To: Make a homemade butter pie crust

Chef John from Food Wishes has created this video tutorial on how to make a butter pie dough from scratch. First, chop up two sticks of unsalted butter and put it in the freezer. Next, weigh out you flour. It should be exactly 12 ounces. Add a half teaspoon of salt. Put the flour and the frozen butter slices in your food processor. Pulse on an off until the mixture looks like coarse crumbs - not too fine, but no big chunks either. Add half of the mixture of ice water and apple cider vinegar. ...

How To: Make a vintage style jewelry box with household items

This video shows how to make a cute vintage looking jewelery box. A cardboard cheese box forms the body of the jewelery box. Other items you will need include mod podge, white glue gesso, masking tape, ribbons, a mirror from a compact, some fabric, and some faux pearls and flowers. Begin my removing the labels from the box. Paint the inside and outside of the walls of the box and the lid. Paint the areas of the box that you just primed with gold metalic paint. Now use the box to trace three c...

How To: Make a top hat out of duct tape

Duct tape is so versatile. You can make incredibly cool things out of tape. Duct tape is cheap, tough and sturdy. In this tutorial, learn how to make a very cool project - a top hat! Look just like a punk rock Abe Lincoln with this tall top hat made from duct tape. Get creative - try different colored tape and make fun designs!

How To: Fertilize & deadhead roses

In this how-to video, you will learn how to fertilize and deadhead roses. Late summer fertilization is okay for these roses. Make sure to water them in well, as this is key. Deadheading in late summer will give you a fall bloom cycle with the roses. Deadheading will mean cutting off dead blooms. Hips are dead blooms that have fertilized. These make seeds and some are either sterile or will actually grow. To properly deadhead, go down to the second or third five-leaf. Cut at a 45 degree angle ...

How To: Cook delicious Moroccan couscous from scratch

Jad Cooper shows us how to make perfect couscous. First, soak the chickpeas, then peel and cut some turnips, a cauliflower or cabbage, some zucchini, sweet potato, green peppers, onions and tomatoes. Wash some cilantro and tie it up with string so it doesn’t fall apart during the cooking. Put the onions, tomatoes and cilantro into a large pot for the base of the stock.

How To: Prune hybrid-T roses

John White and Rosemary Maddox Master Gardner will teach us how to prune our hybrid t-roses. To begin, you’ll need a set of bypass pruners, long handles loppers for branches or canes, which are bigger than your thumb. You may also need a pruning saw, 10% bleach solution which is 10 parts water + 1 part bleach., an old dog bowl for the bleach, gloves, and a low stool. Begin with the bypass pruners clipping all branches that may be crossing or too close to the main branches that you will keep. ...

How To: Keep your tree from dying

First of all you have to check the root which has started circling. Then notice that there is a dark portion at the bottom of the trunk. You can prevent this problem by avoiding to plant too deeply and not to leave in the pot for too long. You have to plant it at the right depth. Now check the roots of the bigger tree that has died. You shall notice that the roots have started circling around a part and then they stop the circulation to the top of the tree and then the tree dies because it wa...