Cutting Edge Pieces Search Results

How To: Origami a paper CD case

This video is about creating a CD case by using Origami, the art of folding paper. This video, which lacks any audio, starts by using a CD in the center of a piece of paper. The paper's edges are folded over the CD to get the correct width. Then, the presenter starts on the edges of the case, which are folded similarly to wrapping a present. The presenter finishes one side and places the CD in the case. Then he proceeds to the final side which folds down over the CD and tucks into the first s...

How To: Use the scallop edge punch with Stampin' Up!

This well done video shows you how easy it is to use Stampin' Ups Scallop Edge Punch to make a really unique and stylish card. Dawn's video shows you that it much easier than you would think. In just four short punches you have gone from a simple square piece of card stock to a really fancy embellishment that you can use in your scrapbook or when making a card. The directions are so easy to follow you will be on your way in no time!

How To: Make Argentinian matambre, stuffed flank steak

Mark Bittman shows us how to make Matambre, an Argentine dish, also known as Stuffed Flank Steak. Take a piece of flank steak and make a shallow cut about halfway down the thickness of the meat, and two perpendicular cuts on either end, then open it up into a large thin piece of meat. Lay it out and sprinkle it with salt, cumin, oregano and garlic. Add some carrot sticks, olives, pieces of onion, parsley, cilantro and watercress. Carefully roll it up into a long roll and secure it with twine.

How To: Maintain an edge on your woodcarving knife

The first step needed to maintain an edge on your woodcarving knife is to test the knife each time before use. One sign of a woodcarving knife becoming dull is for the cuts to come off in small splinters instead of curled shavings. One of the easiest ways to sharpen your knife is to hold it at a 20 degree angle on your sharping belt and push away from your person. You must repeat the rolling motion shown in the video around ten to twelve times before retesting for sharpness. This step can be ...

How To: Hang wallpaper with tips from Lowe's

In this tutorial, Lowe's teaches us how to hang wallpaper. Wallpaper can update a room and give it personality. Make sure you prep and measure your wall before you begin to hang. Now, cut out your paper to the appropriate size for your wall, then draw a line on the wall from the corner to a few inches out of the wall. After this, apply a clear adhesive to the wallpaper if it isn't already adhesive. Now, dump them into a water box and fold the water together and let set. After this, apply the ...

How To: Make a flip square album

This video tutorial is in the Arts & Crafts category which will show you how to make a flip square album. Take a 12 x 12 inches square cardstock and make a score line at 3 inches on all 4 sides of the paper. Now cut along the score line at the top and bottom of the paper up to the 3 inch line. Next you fold along all the score lines inwards and you have all the flaps ready. Then mark along the edge of the center part of the sheet and punch two holes for tying the album as shown in the video. ...

How To: Make custom chipboard buttons for scrapbooking

In this video, we learn how to make custom chipboard buttons for scrapbooking. First, take a scrap of chipboard and use a circle trimmer to cut circles out. Cut circles out of patterned paper in different sizes using many different patterns. Now, apply glossy finish onto the papers and wipe off the excess liquid. Ink the edges after this, then put adhesive onto the back of each of the different circles. Now, you can punch holes into the center of the circle to make it look like a button. Now,...

How To: Color a sugarcrafted lily petal

In this tutorial, we learn how to color a sugar crafted lily petal. Insert your paste onto a green wire, then cover the paste with clear edible glue. Then, place the piece into yellow sugar sprinkles. After this, create your petals out of gum paste and push down on the edges to create a petal shape and feeling. Next, apply the glue onto the center of the flower and add this onto the piece that you just made, wrapping it around. After this, wait for it to dry and you will have a beautiful lily...

How To: Make picture frames for vinyl record covers

This video tutorial is in the Home & Garden category where you will learn how to make picture frames for vinyl record covers. These frames do not use nails or clips to hold the covers. The covers slide in and out of the frames so that they can be changed easily. For this you will need 4 pieces of wood 3/4" thick, ¼" wide and 14" long. First you sand all the pieces. Then you set up your router and the rabbeting bit to cut out the four wooden pieces. Now you need to make indentations on the to...

How To: Make a four leaf clover pattern

In this tutorial, we learn how to make a four leaf clover pattern. First, fold your paper in half, then fold it in half in the other direction. Next, fold the edges making a point and then cut a half an inch along the edge, making a cone shape. end the shape on the right side, making a heart shape. When you unfold, you will have a four leaf clover! You can use any size of paper to make this, just make sure you use green paper to keep the theme Irish. This is a great project for kids to learn ...

How To: Properly cut pineapples

In this video you will learn a simple and fast way to cut a pineapple into small chunks. Begin by cutting off both the top and bottom of the pineapple. Then cut the pineapple in half from top to bottom, rotate the pineapple 45 degrees and cut again so that you have eight long wedges. Take each wedge and set it on the cutting board skin side down. Cut in two small pieces but don't go all the way through the skin. Finally, pass the knife along the bottom of the wedge removing the skin. Repeat t...

How To: Propagate iceplants and african violets

to transfer ice plants, take a Styrofoam cup with holes in bottom and sides for drainage. fill cup with potting soil. place cuttings of ice plants into pot, about 2-3 cuttings per cup. keep moist. for African violets, snap off an entire leaf including the stem. fill a Styrofoam cup with water. cover with saran wrap with a rubber band around the edge to keep it tight. cover completely with aluminum foil to keep inside of cup dark. place hole in center of plastic/aluminum foil with a pencil. pl...

How To: Make Christmas ornaments from CDs

This video from Educational Art Institute shows us how to repurpose old CDs for use as Christmas ornaments. There are many different ways to do this. One idea is to use glue applied onto the CD in any pattern or design and add one or more colors of glitter. If you don't like the mess of glitter, then glitter glue is a great alternative. They come in many different colors and are easy to apply. In both of the above cases you can also add sequins for more decoration. If you are going to decorat...

How To: Arrange a dozen roses for a fall themed vase

In this video, the viewer will learn how to arrange a dozen roses for a fall-themed vase. You start out by putting warm water into the vase. Next, you weave the stems of various green foliage pieces and place them in the vase. Allow the green foliage to cascade over the edges of the vase for a decorative look. Once the green foliage is in the vase, you can begin adding your roses. Before adding to the roses, all thorns should be removed and the stem of each rose should be cut under water. Pla...

How To: Make a Cricut graduation card

Cardcrazy09 teaches us how to make a graduation card. You take a piece of black card stock paper and stick thin white paper edges on each side, like a window. You then use the Cricut to make a star and the word Congrats. This will go on the left, on top of some black printed moxie paper. The right side of the card also features a piece of moxie paper, with graduation hats pattern. There are also nail heads stuck on top. The last idea is to also include money to your son/niece.

How To: Sew by hand

Watch this video to learn how to sew by hand! You need scissors, thread (or floss), a needle, and fabric. First, stick your threaded needle through the cloth and pull the thread through. To make a running stitch, push it back through to the opposite side. Your stitches should look like a dashed line. For a whip stitch, keep pushing the needle through the fabric from the same side each time, near the edge. It will wrap around the edge. To tie it off, push the needle back through the loop of a ...

How To: Debone a whole chicken

Place the whole chicken on the cutting board breast side up with the wings facing away from you. You will need a sharp heavy chef's knife to cut up the chicken because you will be cutting through bones. Start by finding a joint in the wing and cut off the wing at that joint. Then do the same thing with the second wing. Next, cut off the chicken legs by running your knife down on the side of the chicken toward where the leg joint is. Bend it back until the joint pops. Cut through the joint and...

How To: Hem pants & avoid the tailor

This video shows you how to hem pants to your desired length. First, try on pants and roll up cuff of legs to height you desire. Remove pants and use a pen to mark what will become the new cuff line. Then use tailor chalk to draw a line to be cut with scissors. Cut line with scissors. Turn pants inside out and fold in about a half inch or desired amount to make cuff edge. Turn pants right side out. Using a sewing machine, restitch the new cuff you have pinned up.

How To: Perform an interrupted and a subcuticular suture

If you want to perform an interrupted and a subcuticular suture you should first make a bite through the skin. In order to make a bite through the skin you should put the needle point perpendicular to the surface, turn your wrist and make sure it arrives at an even point from the entry point. Grasp the needle as it comes from the tissue. Make sure you always keep the needle in view. Then ti e the suture with an instrument tie and form the knot on the side of the wound so it does not effect th...

How To: Make a hip dress or tunic

In this tutorial, we learn how to make a hip dress or tunic. First, take an oversized shirt and fold it in half. Next, you will cut the sleeves off and the collar around the neck. From here, you will take the excess pieces of fabric and use those as a guide to cutting out the same shapes from another piece of fabric. Now, turn the shirt inside out and sew it. Measure around the neck, then sew the neck and the sleeves so they are ruched. After this, you will add a ribbon on to wear around your...

How To: Make Hand Warmers

In this tutorial, we learn how to make hand warmers. You can make this out of pockets off of an old sweater. First, grab a piece of copy paper and measure over two inches, then fold it in half. After this, measure down 1.5" and then draw a line where this mark was. After this, cut the piece out and lay the paper on the sweater, then draw a line on the paper for the thumb holed. After you do this, you will cut out the area on the sweater, then sew it around on the sides. When you are done, you...

How To: Make pan tumaca (spanish breakfast toast)

In this tutorial, we learn how to make pan tumaca. First, grab a thick crusted bread and slice it into a few pieces, then place it in the toaster. Next, cut a tomato in half, then use a cheese grater to grate the tomato. You will get down to the skin of the tomato, but have a mush at the end. Next, cut a clove of garlic in half, not going through all the way, just to open the garlic up. Remove the root from the garlic, then rub it onto your piece of toast. After this, rub some olive oil onto ...

How To: Shuck an oyster using an oyster knife

This video shows you how to shuck an oyster using an oyster knife. First, wear a metal mesh glove, used for protection, in case you slip-in and cut yourself, on your left hand. Then take the oyster shell on your left hand and pick the knife on your right hand. Then point the knife tip towards the shell, dig it and jiggle it in between the shell, and then grab the oyster from the wedge and twist the knife till the upper and lower parts of the shell are separated from each other. Once the two p...

How To: Make Cricut winter woodland trees

Cardcrazy09 teaches you how to create green woodland Cricut trees. You cut two pieces of the tree. Each one has a slid, on the top and bottom and you glue them together. You can also add glitter as snow. What you can do is smear it with a white ink pad to make it look frosted. The cardinal in the tree is made out of three pieces that you cut and stick together. A red body, yellow legs and brown face is all that's needed. After that, you just stick in the tree for the complete look.

How To: Cut a large mango

Chef Bibby Gignilliat of Parties That Cook will demonstrate the best way to cut a large mango. First, look at the mango and determine which side is the wide side and which is the thin side. Then, lay the mango on it's thin side, and proceed to cut the mango avoiding the pit. Next, you want to take the piece you just cut off and score the mango. Lastly, you want to fold the scored section of mango inside out so that it looks like a porcupine and hold it over a bowl while you cut off the sectio...

How To: Prepare a honey dew

In this video, we learn how to prepare a honey dew. Start off by cutting the end off of the honey dew. After this, cut the other end off of the melon as well. Next, you will take the knife and cut from the top to the bottom, curving the knife. Cut behind the white part so there is no more left over on the melon. Look to make sure there is minimal green left on the rind so you have only white showing. This will give you more honey dew that you can eat. When finished, you will cut this in half ...