Ever had a spoke break on your bike wheel? Don't throw the wheel away! Repairing a spoke only takes a few tools and some patience. You will need, at a minimum: a freewheel tool (used to remove the part of the wheel that engages the bike chain), a wrench, and a screwdriver. First, remove the tire and inner tube from the wheel. Next, remove any parts of the broken spoke that are accessible from the underside of the wheel rim. If the spoke is attached to the side of the wheel where the freewheel...
CyclingSecrets will show you how to lubricate your bike chain. First, start with a good quality lubricant a good one will keep your chain clean. Hold the bottle securely and apply the lube while cycling the bike around. Keep cycling the pedal around for a while so you get the lube all worked in the gears so it gets worked in good. When you have run through enough times you just wipe of the chain and bike with the excess oil.
Assemble tools and materials. You'll need a rim, a hub, and the proper length spokes and spoke nipples. You'll need a wheel truing stand, a spoke wrench, a flat screwdriver, and medium weight oil. A spoke tensiometer, a dishing tool and a nipple driver are optional. Place the rim in your lap with the valve stem hole directly across from you. Hold the hub in the middle of the rim with it axle vertical. These instructions assume you are building a front wheel 3x. Drop one spoke though every oth...
In this how-to video, you will learn how to remove a crank arm with a square taper on a bicycle. You will need a crank puller. You will also need two sockets (14mm and 9/16"), a quarter, a socket wrench, and a screwdriver. Use the quarter as a screwdriver to pull off the cover. You can use the screwdriver in case that does not work. Take the 14mm socket, place it in the socket wrench, and twist off the bolt. Take the crank puller and screw it on one end. Twist the lever until the crank is loo...
This video explains how to adjust a rear derailleur using the limit screws in a bicycle. There is a limit screw which has low and high gear. When the limit screw is turned in, the pulley moves inboard and when turned out, it moves the other way. The derailleur moves along with the inboard. When turned in, it travels with the inboard and holds the chain. Care should be taken not to turn much deeper as the derailleur might throw the chain off. The viewer will get some useful information upon wa...
Knowing how to ride a bike is a fun and useful skill that kids can use well into adulthood. This video tutorial demonstrates a safe and simple way to teach kid’s how to ride a bike. Before taking to the streets, make sure the child is wearing a correctly fitted safety helmet. Support the child while they pedal from the street or concrete into a nearby grassy area. Early on, make sure to teach them proper bike-riding safety laws and be sure to keep the mood light and avoid showing any frustrat...
This is a very interesting instructional video on how to teach a child to ride a bike. It is about balancing according to gravitation. First, the child should ride down a hill with its legs not resting on pedals. This should be practiced about 5 to 10 times. Then the child should ride down the hill with legs resting on the pedals. This helps the child to pedal automatically when it rides on plain roads. This method works well and the child gets confidence quickly. The child will learn to ride...
Fixing a flat bicycle tire is a skill every cyclist should know. This video tutorial shows how to fix a flat tire on a mountain or road bike using a patch. The best way to avoid a flat is to keep your tires properly inflated between 40-60 psi. However, in the event of an accident, it’s important to pack along a patch kit, tire levers, and a pump. To access the damaged tube, release the brakes and remove the actual tire. Apply the patch and replace the inner tube for continued riding.
This video shows you how to change a bicycle tire with your bare hands. First, he shows you how to get the tire out. Use the valve cap to let all the air out of the tire tube and then loosen the bead all the way around. Eventually you can just pop the tube off then inspect and patch it. Then you put the tire back on and pump some air into it. Make sure the tire looks like it's seating properly. That is how you change a bicycle tire.
This video teaches you how to do a check of your bike before you go on a ride, especially if you haven't ridden in a while. Before each ride, check the tire pressure with a tire gauge. Pump it up if it is low, and release pressure if it is too high. Also check the tires' condition, looking for worn places. Make sure the axle is properly seated in the dropout. Check brake pads for wear, or debris from the road. Remove debris with sand paper. Make sure brakes tighten enough to stop the bike and...
To change a tubular bike tire start by stretching the tube. Put your foot on the tire and pull it upward with your hands to stretch it out. Take a clean rim and put Tuflo tire tape onto the rim inching your way all the way around the rim leaving a 2-3 inch gap opposite the valve stem so that you can remove the tube in case of a flat. Pull a small section of the tuflo tape foil loose and leave it sticking out to side of the tire. Put the tire on the rim starting at the valve stem. Once you hav...
Thebiketube will show you how to prep spokes to build a bike wheel. Prior to lacing the wheel prep the spokes. it provides a lubricant that dries and becomes a lead lock. Use linseed oil, found at an art store or a spoke prep. Use a separate color for the sides so you don't mess up. Use a separate color for the drive and non drive side. Take a little and put it on all the spokes. You will have to do this for all 18. Then let it dry.
The video is about adjusting the front derailleur of a performance bike. To adjust the front derailleur you have to first adjust the rear derailleur to the smallest gear. To adjust the front derailleur shift the gear to the largest. If it does not slip into largest gear then adjust the barrel adjuster by turning it counter clockwise till it settles into the largest gear. Turn the barrel adjuster until it stops rubbing against the chain. The full process can be carried out whilst riding, it is...
Professional Triathlon, Jessi Stensland, shows tricks to making quick and smooth triathlon transitions. She takes you through racking of your bike, bike equipment checks, gear positioning, helmet and sunglasses placement, and shoe preparations to minimize the time needed to transition from swimming to biking. Similarly, she covers the biking to running transition and shows how to position shoes, visor, identification, and nutrient packs so that you can quickly transition into the final leg of...
Building your own bike can be an exhilarating and fun experience for anyone, even the most novice of craftsmen. With this tutorial you can learn to start building the rear wheel of a bicycle. He shows you websites to help you calculate exactly how long your spokes need to be for the wheel, where to find measurements on the skeleton of the wheel itself, and clarifies any confusing terminology that you might not be familiar with. After you have all your measurements for both sides of the wheel ...
The video starts out by showing how a bike rack is helpful in repairing your flat tire. Next it takes you through all of the steps, along with tips and instructions on what you need to do. don't forget to heed the "notes‚" throughout as they are important tips to enable you successfully repair your flat tire. In no time at all you will have fixed your bike's flat tire and once again be ready to hit the road.
This video demonstrates how to change a road bike tire. First you would shift rear cassette to smallest gear and then you would open brake calipers or if you have the v-brakes. Then remove the quick release and then remove the wheel. Afterwards remove the tire with the tire levers. He helps by doing this slowly and provides instructions on the video screen in the form of text. If you follow the steps in this video, you'll be able to change your bike tire!
Simple instructions for doing a simple bike repair when you are on the road and don't have your tools. This vide shows how to take the tire off your bike rim without using tire levers. Our host demonstrates on a completely flat tire, and shows us how to leverage off the beads of the tire using only brute strength - the leverage of your hands. He then demonstrates how to put the tire back on. The final small section of bead is pushed on using his body strength. This technique is less likely to...
Use a 5mm Allen wrench and loosen the bolt holding the cable on the rear derailleur. Thread the shift cable through the cable stays and tighten it in the rear derailleur with as little slack as possible. Make sure that the adjustment screw on the shifter is in the mid point of the adjustment.
Jim, from The Bike Tube, describes the parts of a bike so that you understand the parts of a road bike. He starts at the back of the bike and goes through every part of the bike so that you know the names of these parts and where they are located on the bike. Learning the parts is the first step in learning how to care for each functioning part of a bike. From the front wheel to the back wheel, all major bike parts are covered.
This video shows you how to quickly change a mountain bike tire out on the trail. Remove the wheel from the fork. The tools you need are a pump, mini tool,
Frustration is something that comes along with learning to ride a bike. You mustn't give up as it's a valuable skill to have. This video shows you how to ride a bike and minimize frustration.
Don’t play Russian roulette when it comes to your wheels. Keep your bike secure with these precautions.
It's amazing what you can do with a Pringles can! So many things, and if you own a bicycle, that Pringles can attract some serious babes!
Jill and Bizzy show you how to fix a flat out on the road. You are lucky if you have a quick release for your back tire. Otherwise it can take a while to get the back inner tube off to either patch the flat or replace the inner tube. This is a great comprehensive video on quickly fixing a tire on the road.
You’re on the side of the road with a bike tire flat. What is there to do but to impress your friends with the ability to change a tire with no tools? Learn how to change your bicycle tire.
Over a half-million cyclists end up in emergency rooms each year. Lower that number by following some rules on how to stay safe while biking on the road. Learn how to ride a bike safely on the road. You will need a bike with working brakes, a helmet, a pair of bike gloves, sunglasses, and knowledge of traffic laws.
This how-to video offers some tips for maintaining a straight line when you have to look away briefly. Most riders will veer around wildly when they're not looking where they're going, but work up the skills to keep moving forward safely. Watch this video cycling tutorial and learn how to ride a bicycle in a straight line even when looking behind.
Ever wonder what basic tools you should have for all your bicycling needs? This how-to video covers some basic gear that will help you with frequent bike repairs. Tire levers will help change any flats. A multi-tool will keep you from needing to buy several different Allen keys. A bike pump will keep the tires inflated. A spare tube and a puncture repair kits can fix emergency flats. Oil will keep the chain running smoothly. Watch this video cycling tutorial and learn how to stock a bike repa...
Active Expert Gale Bernhardt explains basic gearing and bike fit in this instructional cycling video. Learn the proper pedaling forms and correct bike fit to maximize your bike power output. This video also provides tips on looking for a bike that fits you and your needs. As a beginner, the bike you have now is just fine for your first race. As you get more into the sport of triathlon, then you might consider investing in some new equipment. So watch this cycling tutorial video that demonstra...
Active Expert Gale Bernhardt explains the importance of seat height with this instructional cycling video. It's critical for you as a cyclist to have your bike fit to you. Setting the seat height just right has minimal motion, or quiet hips. A seat height that is correct for you minimizes injury and maximizes power output on the bike. So learn how to set the correct seat height on your bike with this cycling tutorial video.
This is a Burning Man tutorial on how to add fur to your bike. Halycon's Tips guide you on the Playa and the crafting tricks for decorating your bicycle. Get your bicycle prepared for Burning Man by watching this video today!
How to pack your bike for airline or UPS shipping. Perfect for sending your bicycle or if you are flying with it for your next vacation or competition.
This may sound like a terrible thing to show you how to do, but the Neistat Brothers are simply victims of bicycle theft who got fed up. They use their own bikes to show you how to steal a bike in NYC (in broad daylight) so hopefully you can learn from them, how to better protect your ride.
If your bike seat is wearing out, or you want to protect your bike from the elements, you can make your own drawstring bike cover. This tutorial shows you how to get the pattern and then sew the drawstring cover to slip over your bike seat.
Riding your bike is a great, free way to get around the city, but if you've ever tried to do it in heels you know that it can be daunting. This video will give you some tips on how to do it, moving about town without sacrificing style.
Whether you're a pro or someone just taking off the training wheels, buying a bicycle can be difficult. There are plenty of choices and different kinds of bikes for different conditions. Knowing which bike to choose could be daunting. Taking the time to select the right bike ensures that your investment yields the rewards you desire.
Your bike is your prized possession - it is your mode of transportation, your exercise and definitely your fashion statement. But, just because you love your bike, doesn't mean you want to destroy your outfit by riding it. Follow this tutorial and add a pretty mesh barrier to your back wheel and stop ripping and soiling your skirts.
Riding a bike is a great way to get exercise and as means to getting around but incorrect bike assemble will make for a bad time. Double check all your work and make sure everything is lubed up and fastened before taking your bike out for a spin.
Got a shiny new bicycle and trying to figure out how to build it? This how-to video offers some general tips for unpacking a bike and putting it back together piece by piece. Be careful not to hurt yourself, because lots of bike parts are very sharp. Watch this video bike repair tutorial and learn how to build your bicycle.
