Distinct Plastic Search Results

How To: Dismantle a 3rd Generation iPod Nano

In this how-to video, you will learn now to dismantle an iPod Nano 3rd Generation. First, run a plastic tool on both sides of the device. Once this is done, remove the back cover with your fingers. Next, unscrew the six screws on the circuit board. Store them in a place where they will not be lost. Next, remove the click wheel ribbon cable from the jaw connector. Lift the jaw connector with the tool and use a pair of tweezers to gently remove the cable from the jaw. Next, remove the small met...

How To: Fix a small hole in your drywall

In this Home & Garden video tutorial you will learn how to fix a small hole in your drywall. This video is from www.fixitfromhome.com. The cheapest way to fill a hole is to get some dry wall compound, a plastic knife, sponge and a small brush. Take a little bit of the compound on the knife and fill the hole. Press it slightly so that no gaps are left inside the hole. If the rest of the wall has a texture, to match it with the texture, clip the end of the brush, make it damp and just brush the...

How To: Make a cheap 12v lamp out of a condom

In this video you will be shown how to make a light out of a condom. What you will need is a condom, a 600 Ohm resistor, a Led, a scissor, a glue gun and a bottle. Start by drilling a hole in the top of your bottle then cut the top off with the scissor. attach the resister to the positive side of your light. Put the condom over the plastic bottle top. Glue the condom in place. Then quickly blow the condom up and add the Led light to the hole you first drilled. Hook the condom lamp up to your ...

How To: Marinate lamb shoulder

Put the cut lamb pieces into a large size roasting pan. Season it with salt and crushed peppers. Add chopped celery, carrots, and onion. Put in one cinnamon stick. Add some crushed or chopped garlic. Pour in a little vinegar to mask the cooking odor. Add a little white wine, but don't use cooking wine; in addition to tenderizing the meat, a good wine will add to the flavor. Toss in some sage leaves and rosemary needles (not the whole stalk). Toss the mixture, cover the pan with plastic wrap a...

How To: Make boutique hair bows

get a long piece of ribbon, put the ends together and make a crease at wear the ribbon folds, that'll be your center point. Now get one end of the ribbon, and without it flipping over, bring the end to the center of the ribbon and lay it perpendicular to the direction of the ribbon. Also bring the other end of the ribbon to the center of the ribbon but from the other direction. Hold the ribbon together using a gator clip. Obtain a piece of string or plastic strip, tie the folded ribbon tightl...

How To: Cook marinated flank steak in a peppercorn sauce

In this video, we learn how cook marinated flank steak in peppercorn sauce. To make the marinade, juice 1/2 of a lemon and add 2 cloves of garlic, 2 tbsp of peppercorn, 1/4 c vegetable oil, 1/4 c aged balsamic vinegar, 1 tbsp worcestershire sauce and 2 tbsp barbecue sauce. Blend all of these together until it makes a nice sauce consistency. Now, pour your marinade into a plastic bag and place your flank steak inside. Let soak for at least one hour (the longer you let it marinade for, the more...

How To: Replace the LCD screen on a 3rd Gen iPod Nano

This video shows you how to replace the LCD screen on a third generation iPod nano. Using a plastic safe pry tool, run it along the edges of the iPod, releasing the clips. Once the clips have been released, you should be able to remove the back cover. There are six exposed screws on the bottom of the inside back cover, remove all of them. Next remove the click wheel ribbon cable from the jaw connector. To do this, use the pry tool to lift the connector. Use a pair of tweezers to gently remove...

How To: Make a Christmas centerpiece with evergreens & flowers

This video will help you to make a Christmas centerpiece with flowers and evergreens. The materials required are a plastic centerpiece tray, floral foam, two candles, two candle cups and wired wooden pegs. Flowers like red carnations, white cushion chrysanthemums, red and white pixie carnations and roses can be used for this arrangement. Evergreens used are cedar, pine, princess pine, and variegated holly. The foam is placed in water in the tray. The candle cups with the candles are placed in...

How To: Caulk a home window

This video demonstrates how to caulk windows. For this project, you will need the following: a tube caulk, a putty knife, scraper, a knife or scissors, paper towels, a long hanger or a nail, a caulk gun, a small plastic spoon or a popsicle stick.

How To: Store parsley to stay fresh

This video demonstrates how to store parsley to stay fresh. Parsley is a commonly used herb. But you have to buy it in bunches. How do you keep the parsley fresh? First, wash the parsley really good, then set it in a colander so that it drains but not completely. Then take the parsley and lay it out on a paper towel thinly. Leave the water clinging a little to the parsley. Wrap the parsley in the towel loosely like an egg roll. Fold up the ends of the towel. Then place the parsley, in the tow...

How To: Explode soda bottles with dry ice & make a spring

In this video Dave Spencer shows you how to make soda bottles explode using dry ice. You will need dry ice pellets plastic soda pop bottles , and gloves (dry ice can be held in your hands but should be kept moving and not held up too long as it can cause severe frost bite). The presenter asks you to note that this activity is illegal in the state of Utah. Crushed dry ice is inserted into the soda pop bottle. The soda pop bottle is then shaken up vigorously and placed into the ground. You shou...

How To: Make a miniature dollhouse lamp

Start with an eye pin. Place a gold bead and end cap on it. Now put on a piece called a stamp, or stamping. You want to find one that is curved like a lamp. Next put on a large crystal (8mm). In this video she uses a Swarovski crystal. Find some beads you like and place them on the pin. At the end, place on a large plastic back of an earring to secure the beads and hold the "lamp" upright. Now to make the little beaded fringe at the edge of the lamp, you take another eye pin and thread on som...

How To: Make a sweet treat cup door with Stampin' Up!

Dawn5377 teaches you how to make a pink sweet treat cup door. You need a stamp from the sweet center set and you use it on a small piece of pink cardboard. You punch the middle out. Also punch the middle of another piece of pink cardboard. Insert the treat cup door and stick it in. You use dimensionals to hold a white piece of paper, which acts like a tray under the plastic dome. You add some sweet treats inside and stick the other pink piece (with the heart) on the other side. Also remember ...

How To: Remove old wallpaper for dummies

Learn how to remove old wallpaper with this video! Put down a pre taped plastic drop cloth. Tape it to the top of the baseboard. Then score the wallpaper with a wallpaper perforator. Roll it over the wall and it will make little holes in the wallpaper. You can use a 50/50 mixture of vinegar and water or a 25/75 mixture of downy and water as a solvent to loosen the glue. Apply the wallpaper solvent with a paint roller. You can put the solvent in a paint pan so you can get it on the roller. Rol...

How To: Make a Christmas owl card

Mary, from Cardztv, with her love for owls, shows you how to make a Christmas card with an owl on it, in this video. She shows you how to use plastic stamps to create this cute card, along with the Cricut machine from Provo Craft. In this particular video, she uses the Winter Wonderland cartridge for the Cricut machine. She shows you how to make each individual embellishment that's used to create the card. Mary's tutorials make card making easy.

How To: Escape from Dual Zip Tie Handcuffs

You are not having a good day. You've been abducted by sinister folks, and your hands are tied by a pair of zip ties bound together. How will you escape? In this tutorial, the guys at ITS Tactical show you how to escape from these bound cable ties, which are frequently used as makeshift handcuffs by police and military personnel, along with mischievous kidnappers. To break free, believe it or not, all you need is a little force.

How To: Make a scary light up pumpkin that blasts a truck horn

Warning: this video does not demonstrate the actual instructions for making this spooky Halloween LED light up pumpkin that blasts a truck horn. Check out http://blog.makezine.com/archive/2008/10/howto_tuesday_scariest_pu.html for more information and a complete build process. Learn how to make it with the text and image process step by step. Halloween fun!!

How To: Be a dumpster diving freegan

So you recycle your newspapers and plastics. Big deal. “Freegans” are trying to save the environment by living exclusively on stuff in your trash. Here’s how to join them. You will need a willingness to get dirty, a tolerance for eating food from the garbage, and a commitment never to buy anything new. Watch this video tutorial and learn how to dumpster dive and live like a freegan.

How To: Take pictures of lightning with a Nikon DSLR

Here is a detailed video that explains techniques and equipment you can use to take pictures of a lightning storm. Yes, take photographs in an actual lightning storm. You will definitely need a tripod to take a photograph with a long exposure and a plastic bag to protect your camera from the rain. Telephoto lenses allow you to keep a safe distance and avoid switching lenses during a lightning storm. Equipment used in this video: Nikon d300, Nikon 18-200mm vr and Nikon 70-200mm f/2.8 vr lenses.

How To: Make barbecued pulled pork in a smoker

Pulled pork sandwiches anyone? Watch this how to video and try this easy to do recipe for real BBQ pulled pork, all done on a simple backyard BBQ smoker. All you need for this pulled pork barbecue is 8-10lbs. of Boston butt, also known as pork shoulder, and your favorite dry rub and barbecue sauce.

How To: Solve a 5x5 Rubik's Professor Cube

In order to solve a 5x5 Rubik's Professor Cube, you'll need to, of course, already know how to solve a 3x3 Rubiks Cube. First, you'll need to get the centers solved first, then you pair the edges (with the algorithm 2D*, R, F', U, R', F, D'*), and solve parity (with the algorithm 2R*, 2B, 2U, L*, 2U, R'*, 2U, R*, 2U, 2F, R*, 2F, L'*, 2B, 2R*), then you continue to solve it just like a normal 3x3 cube until it looks brand new, out of the plastic box.

How To: Make a ceramic pinch mask

Check out these great videos to learn how to make a ceramic pinch mask. The second eye is made by using porcelain for the white of the eye and black-mountain for the pupil. The head itself is Maya red clay. They are all high-fire cone 10 clay. All the parts are plastic clay, fresh from the bag, thus eliminating the need to score and slip.

How To: Craft a "Harry Potter" style wand that lights up

With the first installment of "Harry Potter and the Deathly Hallows" out, don't be surprised if you find yourself more than ever wanting to whip out a twelve inch phoenix feather wand and wrist twirl your way to defeating your own personal Voldemort. While this video won't teach you how to do magic (so sad), it will teach you how to craft a very cool-looking "Harry Potter" wand that can do the "lumos" spell.

How To: Create super hero cape party favors

In this tutorial, we learn how to create super hero cape party favors. First, take a plastic red table cover and remove it from the package. Next, open it up and fold it in half twice, so you end up with a rectangle. Then, take scissors and cut a large triangle shape out of the material. When finished, open up the cover and it will be in the shape of a cape! Then, cut out some "s" for Superman signs and tape it on the back of the cape. Then, tie string around the top so it can be worn and you...

How To: Make blue silly putty

In this tutorial, we learn how to make blue silly putty. To make this, you will just need borax, glue, and food coloring. First, pour a cup of water in a bowl with a couple tablespoons of glue and some borax. When it's all poured in the bowl, mix it together. After this, add in the food coloring until you have the color that you want. Mix the putty together until well combined and then play with it! You can store it in a plastic container to play with later and use for whatever type of craft ...