Draining Holes Search Results

How To: Make a simple cheese and onion pie

In this edition of Titli's Busy Kitchen, Titli Nihaan shows us how to make a cheese and onion pie. This is a great comfort food and it's really quick and easy to make. Here's what you'll need: 400 grams sliced onions, 400 grams grated cheese, 500 grams of pastry (we're using ready-made pastry), and 2 eggs. Put the onions in a pot and add just enough water to cover them. Bring that to a boil. When it comes to a boil, turn the heat down and simmer gently for 10 minutes. This softens the onions ...

How To: Make a chicken and noodle casserole with Betty

Chicken noodle soup is a very comforting dish, but sometimes you need something a bit heartier. In this video, Betty shows us how to make her favorite chicken noodle casserole. This dish is bursting with flavor and very filling. The casserole is perfect for a chilly winter evening or anytime you need some extra lovin'.

How To: Make a halter dress out of old t-shirts

Of two old t shirts, one is taken and marked from the collar to under the armpit on all four sides of the t shirt. The marked lines are cut along. The shirt is tried on and pinched and pinned under armpit until the right fit and marked with chalk. Both sides of the shirt is cut off and along the chalk line is pinned. A straight edge and chalk is used to make a line from the pin to the bottom edge of the shirt on both sides.Both side of chalk lines are pinned down. The bottom is made even with...

How To: Use your Halloween jack-o-lantern to make pumpkin pie

Pumpkin pies from scratch! Take flesh of pumpkin and make sure it is cleaned out nicely. You can keep it with skin on and peel off at end. Put it in dish and preheat oven to 375 degrees. Put tin foil and close it up and stick a fork in it. If it goes all the way through you know its ready. Make sure they are cut in little small cubes and smash them up. Then squeeze out excess juice and save for when you need it. Put all together and blend in blender. Then pour in pie crust. Until you poke hol...

How To: Building a compost bin out of cinder blocks

blockvideos shows how to build a cinderblock compost bin for recycling needs. The builder will need 20 corner blocks, 36 AB York blocks, 12 AB Dublin blocks, 17 wall caps, 5 fifty pound bags of crushed rock, and and 2 tubes of masonry adhesive. To begin, find a location to build the compost bin and lay out the first layer of back wall and side wall blocks, lining them up straight. Check the dimensions of the layout. Once confirmed accurate, use a shovel to mark the grass around the blocks. Re...

How To: Make delicious fall off the bone BBQ ribs

This video demonstrates an unusual method of making barbecue ribs, and that is cooking them in the crock pot. Take a slab of baby back ribs and remove the skin on the back by loosening it with a knife and grasping it with a paper towel. Sprinkle a bit of sugar all over the ribs and rub it in. Make a small cut with a knife in between each of the bones. Starting at one end, roll it up into a ball and wrap it in foil. Poke some holes all around the foil. In the bottom of the crock pot place a di...

How To: Repair and seal an asphalt driveway

An asphalt driveway looks good when new but over time, wear and tear will show. This video by Lowes.com shows you how to clean, repair and reseal your driveway to maintain it and make it last. Before starting the job, check the weather for a few dry days. Tools and materials needed are listed highlighting safety equipment to be used and precautions to be taken. Weeds, stains and dirt are removed and a low pressure is used to rinse the driveway clean. Crack sealant is used to repair smaller cr...

How To: Build a universal motion alarm to protect your home

This video shows us the method to make a universal motion alarm to protect your home. You will need a reed switch with an alternating contact, a 9V battery with a battery clip, a switch, a buzzer, a small plastic box and a magnet. When a magnet is brought near the reed switch, it switches to the other contact and the switch is open. If the magnet is removed, the switch is closed and the buzzer starts ringing. Make the circuit with correct polarity for battery and the buzzer. Make a hole in th...

How To: Pick a lock easily with 2 paper clips

ZurplusFaction shows viewers how to pick a lock easily using 2 paper clips. First, you need to take your first paper clip and fold one end out. Fold it out again and straighten this out. Next, take the folded out in and fold in again so it forms boomerang shape with the paper clip. Now, take your pliers and squeeze this folded part together tightly. With a bigger paperclip, and use wire cutters to cut of a straight piece of the paper clip with a curve at the top. Now, you are ready to pick yo...

How To: Keep your tree from dying

First of all you have to check the root which has started circling. Then notice that there is a dark portion at the bottom of the trunk. You can prevent this problem by avoiding to plant too deeply and not to leave in the pot for too long. You have to plant it at the right depth. Now check the roots of the bigger tree that has died. You shall notice that the roots have started circling around a part and then they stop the circulation to the top of the tree and then the tree dies because it wa...

How To: Disassemble and clean the Tippmann A-5 Flatline barrel

First of all take one eight inch 'Ellen ' wrench and take off the back screw. Now you have to slide out the back plate. There is no need to take the front plate apart. You can clean it using some hot water.You can run hot water over it for a minute. You can also set it in a sink and then run hot water from the tap. You can see a scratch mark on the shaft. That is there to show you the vertical. Now insert in to the round so that this mark is in line with a little mark over it. If it is not al...

How To: Put new strings on an electric guitar

Learn with this informative video how to put new strings on an electric guitar. The best kind of strings to put on an electric guitar are Ernie Ball Coated Slinky strings. The first thing you want to do is release the tension in the string. You do this by loosening up the tuning knobs on the top of the guitar. The string will then be loose and will release all the way to the bottom bridge. Next all you have to do is push the string towards the guitar and it will push through out the back side...

How To: Make Mexican tres leches

Anuja and Hetal teaches the secrets of making Mexican tres leches. An excellent summary is given below. First whisk 4 eggs in a bowl till they are light and fluffy and add some sugar to it and whisk it. Sift the flour, baking powder and salt in a another bowl and keep aside. Mix vanilla to the cold water and keep aside. Now add the flour mixture and vanilla mixture to the eggs and whisk it nicely till the batter is smooth. Pour the batter into a baking dish and bake it in preheated(325 F) ove...

How To: Build an Egyptian Pharaoh's room in Photoshop

Pixel Perfect is the "perfect" show to help you with your Photoshop skills. Be amazed and learn as master digital artist Bert Monroy takes a stylus and a digital pad and treats it as Monet and Picasso do with oil and canvas. Learn the tips and tricks you need to whip those digital pictures into shape with Adobe Photoshop and Illustrator. In this episode, Ben shows you how to build an Egyptian Pharaoh's room in Photoshop.

How To: Master the gusset stitch for knitting

Stay tuned for this knitting instructional video on the gusset stitch. When you knit the heel flap, you slipped a stitch at the beginning of each row. This made a very nice chain through which you can pick up the gusset stitches. You can either pick up stitches through the whole chain stitch, or through the back loop of the chain stitch. Picking up stitches through the whole chain stitch creates a rather definite seam on the inside which could be uncomfortable to wear. I prefer to pick up the...

How To: Insert a heel when knitting a sock

Stay tuned for this knitting instructional video on inserting a heel for a knitted sock. This is a very large scale knitted sock. It's going to be a felted Christmas stocking. The knitting is finished except for inserting the heel. The knitting technique demonstrated is exactly the same for a more normal, human-size knitted sock. It's also the same technique used to insert a pocket in a sweater.

How To: Master the knitting technique short-row shaping

Watch this video demonstration of the knitting technique short row shaping. In traditional knitting shoulder shaping, stitches are bound off across the top edge of the shoulder on sequential rows, creating a stair-step line. It can be difficult to make a neat job of seaming this shoulder line. Short-row shaping provides the same slope, but creates an even line across the top edge to facilitate a neater finish.

How To: Treat blisters

If you’re a dancer, athlete or just breaking in a new pair of shoes you know that blister can add pain and discomfort long after they’re formed. By keeping a blister sterile and away from further friction you can get your blister to heal quickly.

How To: Make a teapot in ceramics

Simon Leach teaches us how to make a teapot in ceramics in this video. After you have created the basic pot for the tea, you will need to poke several small holes into the side of it where it will be poured. After this, you will need to create the spout and mark where it's going to go on the pot while it's still wet. Now, key the area on the pot where the spout is going to go, then apply water to it and push the spout onto the area. Push along the sides gently until the spout is stuck on comp...

How to Play Battlefield: Bad Company 2 - Ch. 12: Airborne

This is it. The last one. The last mission in Battlefield Bad Company 2. Airborne. This is where you and your unit finally find the scalar weapon. If you're scared of heights though, this might be the most terrifying mission of all, with a freefall plummet down to the Earth's surface. Yo have to shoot and kill Kirilenko when you're falling, too, so don't panic. Watch this video walkthrough to learn how to complete the Airborne mission in Bad Company 2 on the PS3.

How to Play Battlefield: Bad Company 2 - No One Left Behind

Things are really heating up now with that the Russians are putting on the pressure in Battlefield Bad Company 2. This time your helicopter gets hit by an RPG and you need to put it down and make your way through the clearing in the jungle. Destroy all the M-Com Stations, and nobody can die. Watch this video walkthrough to learn how to complete the No One Gets Left Behind mission in Bad Company 2 on the PS3.

How to Play Battlefield: Bad Company 2 - Sangre Del Toro

The first thing you need to do in this mission on Battlefield Bad Company 2 is to hop out of the copter and get in the sand buggy and head to your marked location. You'll need to locate and head to each station on the map: Bravo Base Station, Charlie Base Station, and Alpha Base Station. After that, complete the Triangulation Point. Watch this video walkthrough to learn how to complete the Sangre Del Toro mission in Bad Company 2 on the PS3.

How to Play Battlefield: Bad Company 2 - Snowblind

Make your way to the crash site in this mission on Battlefield Bad Company 2. You'll need to protect the crashes satellite from RPGs and enemy fire. Then you need to destroy yet another M-COM Station, so make sure you're ready. Watch this video walkthrough to learn how to complete the Snowblind mission in Bad Company 2 on the PS3.

How to Play Battlefield: Bad Company 2 - Crack the Sky

Crack the Sky in this mission on Battlefield Bad Company 2. Use the minions on the helicopter to to take care of your enemies below, and once you kill them all, the copter will drop you off where your real mission starts. Make sure to destroy the M-Com Station. Watch this video walkthrough to learn how to complete the Crack the Sky mission in Bad Company 2 on the PS3.

How to Play Battlefield: Bad Company 2 - Upriver

In Mission 4 (Chapter 3) of Battlefield Bad Company 2, you need to first take care of the sniper. You can only fire the sniper rifle during the thunder, or you'll automatically lose the mission. So make sure you have sniper sensibility in this mission. Watch this video walkthrough to learn how to complete the Upriver mission in Bad Company 2 on the PS3.

How to Play Battlefield: Bad Company 2 - Heart of Darkness

This is the third mission in Battlefield Bad Company 2 called the Heart of Darkness, where you need to follow your unit through the ruined village. But first you have to survive the helicopter ride with the hippy pilot. You need to destroy the M-COM stations to succeed in this mission. Watch this video walkthrough to learn how to complete the Heart of Darkness mission in Bad Company 2 on the PS3.

How to Play Battlefield: Bad Company 2 - Operation Aurora

At the very beginning of Battlefield: Bad Company 2, you and your squadron are floating down a river behind enemy lines. At first, you're just watching and learning, then you finally gain some control and learn how to use your weapons and make your way around the battlefield. Watch this video walkthrough to learn how to complete the prologue Operation Aurora in Bad Company 2 on the PS3.