Draining Holes Search Results

How To: Change the oil on a riding lawn mower

It is very important to change the oil on your lawn mower just as important as changing the oil in your car. The oil liberates, cools and cleans the engine. It is best to check your manufacturers information to know how often to change the oil. To change the oil you will need the following: a wrench, gloves, a drop cloth, a socket wrench, oil container, a brush, a new oil filter, an oil filter wrench and fresh oil.

How To: Make an egg carton tulip

In this Arts & Crafts video tutorial you will learn how to make an egg carton tulip. Cut out two cups from an egg carton. Then cut petals into the cups by cutting out triangular shapes. Make four petals on each cup. Then with a pencil, poke two holes on the bottom of one cup opposite each other in line with the two lowest points of the petals. Do a similar thing on the other cup but, in line with the two highest points of the petals. Then take a pipe cleaner and pass it through one hole of on...

How To: Unclog your kitchen sink

It can be pretty nasty when your kitchen sink gets clogged. The kitchen is an easy sink to clog up - food, trash and tons of other junk can get caught in the delicate drain. In this 90 second tutorial, learn how to unclog that sink and get things running smoothly again.

How To: Make your own art journal

By watching this video, you will learn how to create your own art journal. Begin by cutting pieces of heavy weight cardstock 5" by 8". After you have cut all your sheets, fold them in half. If you want a defined crease, you can use a bone folder. Next, poke small holes in the crease of each sheet. Start at the center and then poke one every inch above and below the center hole. Then using a regular running stitch, sew through each hole of a single sheet. Once you reach the bottom hole, bring ...

How To: Make a junk journal out of random items

To make a journal made of junk you're going to need a couple of things. First an unbleached linen thread because it doesn't bleed out into your work, you'll need a candle, a binder clip and a stack of papers. The papers you need to fold down the middle and put in four evenly spaced holes down its spine so that it looks like a book. Use the clip to hold the papers together while you measure the thread. The thread needs to be three times the height of your book. Wax this thread using the candle...

How To: Patch a hole in a fiberglass hole

LowkeeLT demonstrates how to patch a hole in a fiberglass boat hull. First, grind around the edge of the hole to make it smooth. Make an angle that goes towards the hull so that the resin won't get caught and create air pockets. Attach kitchen wax paper to the boat as a non-stick material for the poly resin to set against. Then, put down a flexible cutting board by duct taping the two layers on the outside of the hull and pulling it taut. Attach three layers of fiberglass strips with resin to...

How To: Locate water in a dry desert water bed

When trying to locate water in a dry desert look around to see if there are any disingenuous trees since these trees are usually near lakes and falls. Once you have located one find a low spot or a damp area near the tree. Using a stick or another tool available dig a hole into the area until you find water. Make sure to keep the edges of the hole your digging nice and round so that the hole won't fall in on it self. When you've found water it should flow into the hole. The water is usable so...

How To: Properly lace ice hockey skates

Dan Perceval, founder of the sport of Xtreme Ice Skating explains us in the video of how to properly lace ice hockey skates. It starts with the wax laces. There are different forms but he suggests heavy wax since it lasts long. These wax laces are used to grip the boots. We normally we use 120 inch if there is no wrapping around and it should be in excess if you wrap around. Now we start with lacing. You can start outwards or inwards in hole one. He prefers outward so he inserts the lace outw...

How To: Cut spokes to build a bike wheel

Assemble tools and materials. You'll need a rim, a hub, and the proper length spokes and spoke nipples. You'll need a wheel truing stand, a spoke wrench, a flat screwdriver, and medium weight oil. A spoke tensiometer, a dishing tool and a nipple driver are optional. Place the rim in your lap with the valve stem hole directly across from you. Hold the hub in the middle of the rim with it axle vertical. These instructions assume you are building a front wheel 3x. Drop one spoke though every oth...

How To: Drill a shank hole or clearance hole

Drywall screws were originally created specifically for drywall projects. But they have become increasing popular for woodworking projects because you can often screw them into a soft piece of wood without having to drill a pilot hole. But because they have threads all the way up to the head of the screw they will not pull two pieces of wood tightly together. So to get the drywall screw to hold two pieces of wood tightly together you have to drill a shank hole through the first piece of wood ...

How To: Change the oil on a Kawasaki KLR650

This motorcycle maintenance video shows you how to change the oil in a Kawasaki KLR 650. You do not need to remove any body work to change the oil. The procedure is the same for all years of KLR 600 and 650 (thank you fixer). So watch and learn how easy it is to change your own oil in the KLR650.

How To: Turn your Motorola Droid Bionic smartphone into a mobile Wi-Fi hotspot

If you have a subscription with Verizon Wireless to use the mobile hotspot feature on the Motorola Droid Bionic Android smartphone, you can provide internet access to any nearby device with a WiFi connection by accessing the mobile hotspot application on your Bionic. This guide from Motorola will walk you through the process, but be careful because the hotspot feature will drain your battery!

How To: Save battery life with the Battery Manager on the Motorola Droid 3

Is the battery on your Motorola Droid 3 getting drained fast? If you're tired of running out of battery life when using the Verizon Wireless smartphone, try out the Battery Manager located in the settings menu on the Android device. The utility features several different profiles including "maximum battery saver" and "nighttime saver." By changing a few options on your smartphone, you can drastically increase and improve the battery life of the device.

How To: Create a refreshed look, for an older woman

Image Consultant, Sharon Connolly, in this tutorial shows you how to create a quick, simple and easy look that will help you look awake and raring to go on those mornings you're a little drained. No fuss make-up particularly suitable for more mature women who still want to look sexy.

How To: Winterize the sterdrive unit on your boat

In this tutorial, we learn how to winterize the stern drive unit on your boat. By draining the oil as the last step, you must inspect for moisture. If you have no moisture, you can assume there is no water intrusion so you don't have to do any repairs. Remove the oil out of the lower unit first, making sure to keep an eye out for metal shavings and moisture. Use the proper gear lube to make sure you are draining all the areas properly. When finished, your boat will be ready to be stored and b...

How To: Get rid of that smell coming from your shower

In this tutorial, we learn how to get rid of that smell coming from your shower with Bob Schmidt. First, you will want to clean out your drain pipes to make sure the smell is not coming from there. If the smell is coming back out, you will need to do additional work. If water gets saturated into the base of the shower, then there should be some gravel around it so the water can soak through and go down into the drain pipe. If moisture soaks through the tile grout, then it can bring out the se...

How To: Change the oil on a Kawasaki Ninja 650R motorcycle

In this tutorial, we learn how to change the oil on a Kawasaki Ninja 650R motorcycle. First, find the oil can on the car and use a socket wrench to remove the drain plug. Let the oil drain into an oil pan until there is no more left inside of it. When finished, replace the plug back on the can tightly. Now, open the cap up on the oil can and pour in your new oil. After this, start your engine and then check your oil level on the motorcycle. Then, you will have changed oil in your motorcycle, ...

How To: Remove fruit flies from a home

In this tutorial, we learn how to remove fruit flies from a home. If you have a heavy infestation of these flies, you will need to use PT 565 aerosols. Spray the aerosol for around 15 seconds in the spot that the flies are harboring. Open up cabinets so the product can get inside through the air. Then, move to other rooms and fog these with the spray to make sure you get all areas. Leave the area for a few hours to let the spray set in, then use drain gel which will clear out the flies from t...

How To: Make hot parmesan artichoke dip

In this tutorial, we learn how to make hot parmesan artichoke dip. First, heat up a skillet and then grab your ingredients. You will need: 1 1/2 cups mayo, 3 jars marinated quartered artichoke hearts, drained and chopped, 2 cans chopped green chilies, drained, 2 cups freshly shredded parmesan cheese, and 4 tsp minced garlic. Combine all of your ingredients and stir together with a spoon in a slow cooker. Cover the cooker and let it simmer on low for 4 hours. Stir this mixture up when it's don...

How To: Cook stir fry rice noodles with vegetables

In this tutorial, Chef Ken Hom shows us how to make stir fry rice noodles with vegetables. First you will need to take 8 oz rice noodle and soak them in water until they are soft, then drain them. Now you need to prepare your vegetables. You will need: bean sprouts (8 oz), red peppers (4 oz), shredded water chestnuts (8 oz), spring onions (6 of them finely shredded). Now, stir fry your vegetables in oil and add in 1 tsp salt, 2 tbsp of soy sauce, 3 tbsp of rice wine, 2 1/2 tbsp tomato paste a...

How To: Care for hibiscus plants

In this video, we learn how to take care of hibiscus plants. These can grow anywhere from 3-10 feet tall, so make sure to take care of these! Some extra steps to help are to: plant these in a well drained area and water it, let it drain and water it again. During the winter, mulch the flowers and it will survive. Make sure you pinch the flowers that are dead to keep your plant looking gorgeous and make sure you trim any dead branches that make the tree look dead. Doing these small steps will ...

How To: Use a bead reamer to smooth sharp edges on a bead

This video teaches us to use a bead reamer to smoothen sharp edges on a bead. You need a reamer, some water and the reaming tips. We need the large tip for enlarging and smoothening the holes and a 45 degree edging point for smoothening the edges of the hole. Twist the handle of the reamer and insert the tip in it. Take the bead and the reamer with the large tip & dip it into water periodically during the procedure so that the water acts as a lubricant. Begin filing the inside of the bead hol...

How To: Make a homemade quiche

This is a USA fire and Rescue's favorite recipes segment. To make this quiche you begin by preheating the oven to 350 degrees Fahrenheit. After that you combine cheese, and flour (the thickener) in a mixing bowl and toss them until the cheese is lightly coated. Next, add beaten egg, and pepper. Mix again. Now you need to add cooked and drained broccoli, and drained mushrooms. Mix again. Pour into a pie shell and cook for about an hour, or until it sets. A good tip is to cover the edges with t...

How To: Make easy baked artichokes

Preheat oven to 350 degrees. Open tomatoes and drain liquid. Pour tomatoes into a mixing bowl. Add parmesan cheese and mix well. Crack two eggs into the bowl and incorporate into the tomato/cheese mixture. Add onion dip and garlic. Open can of artichokes and drain. Slice artichokes and mix into the bowl. Spray baking dish with cooking spray such as Pam or Mazola. Pour into the baking dish and bake for 30 minutes. Remove baking dish and add croutons to the top. Put back into oven and bake for ...

How To: Make crunchy tempura flakes for sushi

Vraymond02 shows how to make crunchy tempura flakes. Start by peeping a pan that will be used for draining. Mix your wet ingredients together, then put flour, water, and egg whites together to form your batter. Strain your batter, then heat your oil on high heat. Pour your batter slowly into the oil; drain when you're done. It should be crispy when done. If it's poured too fast or too much is poured at once it will bake a big dough ball that won't be right. Break the pieces up, wait 5-10 minu...

How To: Install a tubular skylight

A tubular skylight is a fast and inexpensive way to bring natural light into your house. The tubular skylight has three parts a dome, reflective tubing, and a diffuser. First locate the ceiling joists in the area that you would like to install the skylight and mark them with tape. Make sure you stay in between the joints. Once you have the spot marked off with tape drill an exploratory hole through the ceiling into the attic. Shine a flash light through the hole up into the attic and onto the...

How To: Make Pakistani style chicken biryani

This is a recipe for chicken biryani. To start you will need half a kilo of chicken, one medium onion finely chopped, a cooked medium tomatoe chopped, one cup of yogourt, a heaped tablespoon of ginger garlic paste, half a teaspoon of termite paste, half a teaspoon of chili powder, salt to taste, heaped tablespoon of coriander powder, saffron, biscanti rice soaked for half an hour, few pieces of garamasal (assorted), a few threads of saffron, half a cup of milk, a few mint leaves.

How To: Make parmesan chicken & macaroni casserole with Betty

In this clip, learn how to make one of Betty's best recipes. This casserole is hearty, easy to make, economical and pleases everyone in your home. There are a bunch of super easy ingredients used in this dish and chances are you already have most of them in your kitchen. Enjoy this delicious meal for family gatherings or on your own and eat the tasty leftovers for days! Enjoy!

How To: Use Retopo to punch a hole in an object in Blender

See how to use use the Retopo tool and View options to make round holes in tubes (or other surfaces) with Blender 2.5. Whether you're new to the Blender Foundation's popular 3D modeling program or a seasoned graphic artist just interested in better acquainting yourself with the application, you're sure to be well served by this free video tutorial. For more information, including detailed instructions, take a look.

How To: Make a colonial flower bouquet

Get a vase and a bouquet holder with dry flower foam inside. Put the bouquet holder in the vase. Place one gardenia in the center hole of the dry flower foam. Then place three gardenias in the holes around the center(odd numbers are good in floral design), evenly spaced apart. Once you are done with that, place a gardenia in the hole in between each of your three outside gardenias, but push them in further, so that they are slightly lower than the other three gardenias. In the remaining holes...