Drop Cloths Search Results

How To: Seal a leaky RV roof with EternaBond tape

In this how-to video, you will learn how to seal a leaky RB roof with EternaBond tape. First, you must have EternaClean to remove any old dirt or grime around the roof. Spray it and remove with a piece of cloth. Cut the tape into the sizes you may require. Lay them out and prepare the surface using EternaPrime. Place the EternaBond tape where you want it, as it will not come off once placed. Rub bubbles or creases out. Wider tape may be considered for bigger jobs. By viewing this video, you w...

How To: Design your own clothes & mix dye your clothes

Eddie teaches the secrets of designing your own clothes & mix dying your clothes. First mix together 1 tablespoon golden yellow, 1/2 teaspoon sunshine orange, 1/2 cup salt and 4 cups of hot water. Dip a piece of cloth to check the color, add more dye to make it darker or some water to make it lighter. Pour the dye solution in a big container with water, add some detergent and batter to mix the dye well. Put you plain shirt in hot water for sometime, squeeze it out and put it in the container ...

How To: Use the Yudu personal screen printer

CreativeXpress shares a video regarding the usage of the Yudu personal screen printer. Put the plastic foil over the design you want on your t-shirt and turn on the light on the printer. This will cause the design from the page to be transfered onto the foil. Then you simply place the shirt onto the foil and place a good amount of ink on top of the foil. Use the squeegee to spread the ink over the design and onto the shirt. Let it dry for a bit, then iron the shirt using a cloth or piece of p...

How To: Sew by hand

Watch this video to learn how to sew by hand! You need scissors, thread (or floss), a needle, and fabric. First, stick your threaded needle through the cloth and pull the thread through. To make a running stitch, push it back through to the opposite side. Your stitches should look like a dashed line. For a whip stitch, keep pushing the needle through the fabric from the same side each time, near the edge. It will wrap around the edge. To tie it off, push the needle back through the loop of a ...

How To: Make a bow using satin ribbon

Jane from A Floral shows us how to make a bow using satin ribbon. You should first get a long length of ribbon from the spool. You should next determine how long you want the tails of the bow to be. It's okay to make them a little longer because you can cut them off if needed. Start with a loop that is crossing over the top. Take another loop and cross it over the top so you make an X. Scrunch it together as tight as you can. Flip the satin over to one side, dull side down and shiny side up. ...

How To: Make organic compost tea

Patti Moreno, aka “the Garden Girl” shows us how to make compost tea for your garden. You need to prepare compost tea and feed to the plant. To prepare compost tea, first you need to take coconut fiber soil, put it in a cloth, and tie it. Place in a 4 gallon of bucket of water. A little bit of compose may fall out, and slight bubbles gases may form, but this is not a problem. Keep it like this for 24 hours, and your compost tea will be ready. Take this mixture to where you keep your soil and ...

How To: Fiberglass a Mjolnir armor mask from the Halo series

Interested in using fiberglass? In conjunction with the 405th, an online e-zine dedicated to Mjolnir Armor costuming for the Xbox Halo video game series, this tutorial shows you a step by step process of how to layer fiberglass on the inside of a costume mask. Materials needed include latex gloves, respirator or ventilation mask, fiberglass resin, fiberglass cloth, scissors, and a foam brush. Be sure to give up the cash for a great ventilation mask... some of these materials can be toxic to y...

How To: Glue latex in 4 easy steps

This video tutorial belongs to the Arts & Crafts category which is going to show you how to glue latex in 4 easy steps. This is really easy and very fast to do. First you clean the surfaces using mineral spirit and a piece of cloth. Next you apply a thin layer of latex glue using a cotton bud or a brush. In the third step, you let the glue dry for about five minutes and then put the two surfaces together. And finally you apply pressure to the seam with a seam roller. That's it! The latex shee...

How To: Make an ornamental kanzashi hairpin out of a chopstick

A kanzashi, as shown in this how-to video, is an ornamental hair pin used in Chinese and Japanese hair styles. While they're more of a traditional piece, they're still commonly worn by brides and as part of a kimono costume (for geishas). This video tutorial shows a method of making this beautiful piece yourself out of any chopstick. You will need a chopstick, 10cm of wire, a charm, a big bead, two split rings, 3cm of chain, a 5mm x 2cm scrap of cloth, a pair of nippers, a pair of pliers, a k...

How To: Tie a double cross carry for a baby with a long wrap

Need a way to carry around your baby while keeping your arms free? No need to buy a special carrier, all you need is a sturdy cloth and the step-by-step instructions in this how-to video. Find the middle of your wrap. Center on the small of the back. Cross each length over opposite shoulder. Adjust for comfort. Take opposite ends in each hand and cross in the back. Tie a square knot in the front. Get your baby. Place each leg on either side of the cross. Spread the fabric out starting with th...

How To: Make a hammock without sewing

No place to sleep tonight? In a pinch, a little bit of rope and some fabric can be transformed into a hammock bed. This is a great skill for camping, emergency situations, or even communal living. Make sure to use a sturdy enough cloth, and replicate these same knots so that the hammock will support the weight. Check out this video survival training tutorial and learn how to make an emergency hammock without sewing.

How To: Make a flying crank ghost on Halloween

Check out this Halloween tutorial video to learn how to make a flying crank ghost. This is essentially like making a big Marionette ghost puppet. All you need is the following easy to find materials: a styrofoam skull, 7 wire coat hangers, black spary paint, pliers, cheese cloth, tacky glue, and laundry detergent. This flying crank ghost promises to be a delightful scare on Halloween trick or treaters!

How To: Create ink drop & spread effects

In this tutorial, we learn how to create ink drop and spread effects. You will need: coffee filters, fish tank, dropper, black ink, water, and a bowl. Next, pour water into your fish tank, then pour your ink into the dropper. After this, add in water into the bowl and place the coffee filter in it to soak it, then place it on a flat surface. For the first effect, drop the ink into your water and see what it looks like when you drop it into the tank, getting this on tape and using the proper l...

How To: 14 Practical Uses for Nail Polish Remover That Have Nothing to Do with Removing Nail Polish

Acetone-based nail polish remover is great for removing nail polish, and it's also great for some DIY uses around the home. From eliminating scratches to fixing the consistency of correction fluid, its uses are varied but all effective. With nail polish remover, you can also clean your computer keyboard, get rid of ink stains, and even remove leeches from your skin. Talk about versatile!

How To: Convert photos to digital

Buying a digital camera doesn't mean your old prints, slides, or negatives are obsolete. You can easily convert them with a scanner to bring them into the 21st century. Watch this video to learn how to convert photos to digital.

How To: Properly clean your MacBook screen

To clean your MacBook screen use a micro fiber cloth and some water. Before you use water on your rag use the dry micro fiber cloth to wipe down the screen and get rid of all the dust. Once you have wiped the dust off of the screen take the micro fiber cloth and dip it in some water. Make sure that the cloth is not soaking wet all you want to do is put a fine layer of water on the screen as you wipe it down. Once you have wiped it with the damp cloth take a dry cloth or the dry part of your m...

How To: Stop bleeding

The human body contains nine units of blood—but in matters of a traumatic cut or injury, it's always better to be safe than sorry. If you're unsure whether you're in an emergency situation, get to an emergency room and let them decide.

How To: Make a balloon drop with stuffed balloons

Have a balloon drop for your next party. It doesn't cost that much when you make it yourself. Watch this how to video and learn how to put a balloon drop together. This balloon drop works great for birthday parties or other special events. You can stuff the balloons with just about anything to make the balloon drop extra special.

How To: Create drop down menus in Excel

In this software video tutorial you will learn how to create drop down menus in Excel using Data Validation. This example will show you how to display a list of parts in a drop down menu. Create the list of parts somewhere in your worksheet. Then in the cell underneath the one where you want to display the parts, go to the data validation window and enter the data. For this select the cell and then press 'Alt + D + L' to bring up the data validation box. Here you click on 'settings' and selec...

How To: Jerk (dance) - "Pin Drop & Break Leg"

JusJerk and Jerk dance crew, the Stick Figures demonstrate how a "Pin Drop" is done in the world of Jerking, and later, how variations of the Pin Drop (sometimes also referred to as the "Knee Drop") can lead to multiple Pin Drops in a row and/or some pretty impressive acrobats. Later in this tutorial, the Stick Figures show how to do "The Break Leg Pin Drop" by dipping and "breaking the legs". We're guessing they mean this figuratively.

How To: Service a Mavic Freehub on your bicycle wheel

In this video, we learn how to service a Mavic Freehub on your bicycle wheel. To begin, disassemble which requires a 10 mm and 5 mm Allen wrench. Then, remove the end cap and use the wrenches to pry the nuts and bolts from the middle of the wheel. Remove the free hub after this, then set on a cloth to the side. After this, you can remove the spring and slide it out. After this, you will clean the parts off and then reinstall your parts back on the bike. Put them on how you removed them and th...

How To: Create an erupting volcano

In this tutorial, we learn how to create an erupting volcano. First, take ammonium dichromate and pour it into a clear plastic dish. Next, grab a blow torch and blow it onto the material. This will make a substance that is black and looks like ash. This will get messy, so make sure you have a newspaper or cloth underneath the dish. Eventually, the material will catch on fire so you can remove the blow torch, then the ash will fall all around the volcano and the sparks will fly out of the midd...

How To: Stencil a t-shirt with inks

This video shows you how to stencil a t-shirt with inks. Tape the t-shirt onto a piece of cardboard with masking tape. Lay the stencil on the t-shirt and tape some blank paper at the edges to ensure that there is no splashing on the sides. Some mist paint in blue Hawaiian is used. You do not need to apply a lot of it. Add some orange paint too. To make the print permanent, you must take out the cardboard put the t-shirt on the ironing board with the design uppermost. Cover the design with a c...

How To: Remove surrounding "haze" from a tile grout patch

In this Home & Garden video tutorial you will learn how to remove surrounding "haze" from a tile grout patch. Allow the grout to dry and wipe off the area with a dry piece of cloth. Put on gloves, take a bit of grout haze remover on a piece of rag and wipe the floor around the grout areas. This will take the hazing material off. Take more of the liquid and cover more area. Once the rag is dirty, take a clean rag piece and continue the process until all haze is removed. Leave it on for a few m...

How To: Sew a disappearing 9 patch quilt block

In this how-to video, you will learn how to make a disappearing 9 patch quilt block. Start with a simple 9 patch. You can use dark and light fabrics. Put the darker fabrics in place so you make an x shape. Sew these patches together. Now, fold it in half and then line up the ruler. Cut the fabric in half, and then cut the halves in half. Re-arrange the cloth in any way you want and sew them back together. You will have an interesting design once this is done. Viewing this video will show you ...

How To: Make transitional dreads for your hair

This beauty and style video demonstrates how to make transitional dreads. First the color of fibers is chosen of required lengths. The strands are put around elastic supports held taught by two posts of bed or other furniture. The base color, in this case blue, is pleated like hair up to a length required. Before pleating, the fibers are loosened with a comb. The lower portion below the pleats is loosened with a comb and twisted tight. Over the pleats the other color, in this case cream, is w...

How To: Clean a crockpot

Over time, stains can collect in your crockpot. Learn how to properly clean your crockpot and remove stubborn mineral stains and water marks. When cleaning the crockpot, fill it with hot, soapy water once the cooker has cooled. Let it soak for 15 to 20 minutes, then scrub with a cloth, nylon pad, or plastic sponge. Do not use harsh cleaners or metal pads. Rinse well in hot water and dry.