Entails Placing Search Results

How To: Clean your laptop's keyboard by removing the keys

In this video DavidDaGeek shows how to clean your keyboard by removing your keys, but to be careful when doing this. Put your finger underneath a key and just pull it off. Don't break the piece that holds the key in place though! he starts at the shift key and works to the left with the ? being next. Then remove the hair or dust with your fingers. Don't remove them all at once because you might forget what order they go in. To put the key back in, put it in its spot, and click it back in. You...

How To: Make Vincent Valentine's arm guard

This video explains how to make Vincent Valentine's arm guards in under 20mins. The supplies needed to complete this task include card paper, tape, gold spray, pencil and scissors. A ruler must be used to measure the length of your hand and fingers so you can correctly size the arm guards. Card paper is the cut into many small circles and placed around all of the fingers and then painted with gold spray. The hand portion is created by wrapping your hand with card paper and pulling tight befor...

How To: Perform a simple mind trick with cups

This is a video tutorial in the Pranks and Cons category where you are going to learn how to perform a simple mind trick with cups. For this you will need three cups or any similar articles under which another object can be hidden. You then ask one of your spectators to hide an object under one of the cups while your back is turned towards the cups. Then you turn around and point out the cup under which the object is hidden. The trick is to put an indiscernible mark on one of the cups that on...

How To: Make a fast and easy tennis ball trebuchet

In this tutorial, we learn how to make a fast and easy tennis ball trebuchet. This tool will throw tennis balls easily so you can hit them without having a partner around. This only needs a few pieces of wood and 2x4's along with dumbbells. There isn't a whole lot to this, it's very simple to build. Use two 10 lb dumbbells clamped with a hose clamp onto the top of a 2x4. Use a dowel to go through this, so it will help it rotate. Down at the bottom is the release mechanism and on the sides wil...

How To: Lay and ballast O-Scale 3-Rail track

In this tutorial we learn how to lay and ballast O-Scale 3-Rail track. First, lay the track down on a piece of bare plywood. Also, you will paint the wood to prevent it from absorbing liquid when you place glue on it. Put the track down onto a flex bed and then set the flex bed on the wood. From here, place the track onto the road bed and line it up. Make sure the track is centered completely. After this, take a track screw and secure the ends down. Continue to do this throughout the entire t...

How To: Roast a chicken for Christmas dinner

In this video Nicko teaches us how to roast a chicken for Christmas dinner. You will need: 1 large whole chicken, 2 lemons, seasons, paprika, chicken spice, chicken spice, cayenne pepper, bbq seasoning, salt, and pepper. The optional vegetables you can use are: baby potatoes and red onions. First, place your chicken on a roast rack and cover it with the seasoning and the lemon juice. After this, cut your potatoes up and place them around the chicken with onions. Now, roast the chicken in the ...

How To: Make your man propose with feng shui

In this tutorial, we learn how to make your man propose with feng shui. Having a room with the proper arrangements, it can help your man propose. Your focus room should be in the far right hand corner by the front door facing in. First of all, don't have a bed shoved up against the wall or have a drab painting on the wall either. To fix this, place a bed in the middle of the room and give it calming colors. Then, place a relaxing painting on the wall with minimal items around the room. This w...

How To: Make a Spartan 300 shield

In this tutorial, we learn how to make a Spartan 300 shield. You will need: paper mache, durable cloth, gold spray paint, newspapers, cardboard, nuts and bolts, and the cap to a trash can. After you have these, cut out a large piece of cardboard and place it over the trash can cap in a circle shape. Then, dip newspaper strips into the paper mache mixture and apply it to your shield, taking your time to make it smooth. Let this dry, then cut two strips of cardboard and place it in a 'v' shape ...

How To: Roast the perfect chicken

With this video, we learn how to roast the perfect chicken. You want crisp skin with juicy chicken on the inside. To do this, you will take your raw chicken and rub it all around with some olive oil. Get into the small spots of the chicken so everywhere browns evenly. From here, you will add on any herbs or flavored butters that you want on the meat. After oiling, sprinkle with kosher salt and black pepper. Then, tie the legs of the chicken together and place the chicken on a roasting rack. P...

How To: Remove acrylic and gel nails

In this tutorial, we learn how to remove acrylic and gel nails. First, fill a large dish with warm water, large enough to fit a small glass bowl inside. After this, fill the small glass dish with pure acetone. From here, place the bowl inside the large dish and then add in several cotton balls to this. From here, you will place the cotton balls on your nails and then cover them with foil wrappers. Leave these on your nails for around 1 hour and then check on them to see if the acrylic nail is...

How To: Cheat on any test using an eraser

In this video, we learn how to cheat on any test using an eraser. First, take your eraser, it should be wide and thick, not one that comes on the top of a pencil. After this, you will cut a hole out of the middle of the eraser. You can do this easily using a straight edge blade. Once finished, you will take a small piece of paper and write down the answers or information you need on it. After this, you will fold the paper up into a tiny square and then place it into the hole in the eraser. Ta...

How To: Connect to XBox Live with a laptop & ethernet cable

In this video, we learn how to connect to Xbox Live with a laptop & Ethernet cable. First, connect your computer to your Xbox using an Ethernet cord. After it's connected, you will have to change the wireless network setting to 'shared'. To do this, go to the start menu and then go to 'my network places'. Now, go to 'view network connections' and then you need to highlight the connections. After this, right click and then bridge the connections. From here, right click and go to 'properties' g...

How To: Plant a container herb garden

In this video, we learn how to plant a container herb garden. First, lay down a layer of fertilizer to your pot and then rip off the container from around the plant. Then, place the plant inside of the pot and throw some of the fertilizer around the top of the base of the plant. From here, you will place in the rest of the herbs to the pot until it all fits in well. Then, make sure you water this according to which of the herbs that you are growing. Enjoy watching your herbs grow and enjoy fr...

How To: Do your American Girl Doll's in a ballet bun

In this video, we learn how to do your American Girl Doll's in a ballet bun. First, you will need to brush out your doll's hair and put it into a low pony tail or high, depending on where you want the bun on the head. After this, take the hair and twist it around the rubber band base and then take a thicker rubber band to tie around the bun to keep it in place. You can then place another rubber band around for decoration. This will finish the simple bun, which will be easiest to do on a doll ...

How To: Create a marbleized water look with icing

In this video, we learn how to create a marbleized water look with icing. This is a colorful and eye catching way to put icing on a cake to make a memorable piece! First, spoon your icing into a small bowl and then make a rice cereal treat and shape it into a circle. To start to decorate this, you will pipe on green icing to the sides and front of the ball to make it look like a fish. Then, pipe some of the icing onto a flat surface with red confectioner's sugar. Once this is covered and hard...

How To: Cook fried chicken breasts

In this tutorial, we learn how to cook fried chicken breasts. First, place your chicken on a paper towel and then hit it with a meat tenderizer. From here, you will salt the top and bottom evenly. Finish this off with some black ground pepper and any other seasonings that you would like on the chicken. From here, you will put potato starch on both sides of the chicken until it's evenly coated. Now, beat an egg and place the chicken into the bowl with the egg. Then, dip it inside a bath of pan...

How To: Do a really cute hairstyle on your American Girl

In this tutorial, we learn how to do a really cute hairstyle on your American Girl. First, brush the hair out and then pick up the hair from the top of the head. Brush this and then twist the hair and push it up so it creates a poofed effect. You may have to do this several times to get it right. Then, clip the hair into place and grab the right side of the hair. Twist this until you reach the base of the neck and tie it into place. Do this on the other side and then combine both sides togeth...

How To: Replace a broken flush handle

In this tutorial, we learn how to replace a broken flush handle. First, remove the top from the tank on the back of the toilet. After this, find the chain that is connected to the handle and remove it. From here, take a new handle and place it into the spot the old on was in. Use a wrench to tighten this into place. From here, you will connect this with the lever that will flush the toilet using the pump. When finished, test this out by flushing your toilet! If it works, this means the replac...

How To: Build a nest box and ladder for a chicken coop

In this video, we learn how to build a nest box and ladder for a chicken coop. Start off by creating the box with several pieces of 2x4's. Measure each piece individually, then screw them into place. Make sure it's the size that you want it and that it's secure and lays flat on the ground. Once finished, you will bend some metal and place it on the sides of the coup and then fasten the hinges so they are free swinging. Then, pull in a few more piece and you will have created the nest box insi...

How To: Tease your hair using Bumpit hair products

In this tutorial, we learn how to tease your hair using Bumpit hair products. This is a product that you put in your hair to give you lasting volume all day long. It has ridges on it so it holds onto your hair and creates a volumized look! Before you place the product in your hair, you will need to gently tease it. To do this, you will take a section of your hair and hold it up in the air. After this, spray it with hair spray and then brush it down to the root from the top. After this, you ca...

How To: Make a cake American beauty rose

In this video, we learn how to make a cake American beauty rose. First, place your icing into a plastic bag and then place the tip inside of it. From here, you will twist the surface where you are putting your rose and let the icing roll into a round shape. After this, make additional rows of petals until you have the size of flower that you want to create. When finished, you will have a gorgeous rose on your cake or cupcakes! Add in green icing to make leaves on the side of the flower and yo...

How To: Make jerk chicken

In this tutorial, we learn how to make jerk chicken. First, take some green onions and chop them up into small pieces, then place them into a food processor. After this, grab some fresh parsley and cilantro and place those into the food processor as well. After this, add in some hot red peppers to the food processor as well, as many as you would like. Add in some salt and pepper and any other seasonings that you would like, as well as olive oil. When finished, you will rub this on the chicken...

How To: Make Splinter Cell prop goggles

In this tutorial, we learn how to make Splinter Cell prop goggles. You will need: goggles, a saw, pipe, a brush, black paint, duct tape, batteries, chop sticks, glue, a ruler, and a pen. First, mark three cuts on the pipe to 3 cm and 5.5 cm. Now, use the saw to cut these. Then, use sandpaper to smooth all the edges. Next, place these onto the goggles and glue them with a hot glue gun. Next, grab two batteries and wrap them in duct tape. Place these with them and then paint these all black. Af...

How To: Drill porcelain tile like a professional

In this tutorial, we learn how to drill porcelain tile like a professional. You will first need to get a blade that is round and very sharp. Place this on the porcelain and then gently rock the blade back and forth until it cuts the tile all the way through. Make sure you place tap underneath this to catch any of the dust and debris that flies away from you while you're cutting. Remember not to use really strong force to the drill while you are using it, to prevent any wrong cuts on the porce...

How To: Style short hair for work

In this video, we learn how to style short hair for work. When you are styling short hair, it can be difficult at first but you can make it look great. Start out by straightening your hair and make sure it's dry. Then, grab some rollers and place them in your hair at the top and keep them in place with some bobby pins. After this, you will spray hair spray on top of the curlers and leave them in while you are straightening the bottom of the front of the hair to create a shine. After this, tak...

How To: Install a zipper into your knit

In this tutorial, we learn how to install a zipper into your knit. The first way you can do this is to take it to a tailor and they will do it for around $15. To do this by hand, grab your piece that needs a zipper and then steam the edges. After this, take a sewing needle and start to sew the zipper underneath both sides of the edges of the piece. You can also use pins to place into these so it stays in place. Do a backstitch also, to help make the zipper more sturdy and stay on longer.

How To: Unload and repack bisque pottery from a kiln

In this video, we learn how to unload and repack bisque pottery from a kiln. First, take the top off and then take out the smaller pots from the larger ones and set aside. Then, remove the large ones and set aside as well. When you are re-loading this, you will place in the large ones first. Then, place the smaller pots in the large ones if they fit. Squeeze the small ones around where you can. Stacking some into each other is fine. Turn this on for around 30 minutes on low heat, then you can...

How To: Assemble a computer from parts

In this tutorial, we learn how to assemble a computer from parts. First, you will need to take the motherboard, video card, RAM, hard drive, power supply, CD-rom drive, and the case and make sure you have them all laying out. From here, you will take out the motherboard and plug the RAM in to the appropriate spot for it. This will be located next to the fan on the upper right hand corner of the motherboard. After this, place the motherboard inside of the computer case and then insert in the v...

How To: Make Australian buttermilk fried chicken

In this tutorial, we learn how to make Australian buttermilk fried chicken. You will need: salt, pepper, an egg, butter milk, Corn Flakes crumbs, flour, and chicken pieces. To start, you will want to place the chicken into a plastic bag after washing and drying, then pour butter milk over them and let them sit for 2 hours. Now, you will need to crack your egg and whisk it with milk, then place your corn flakes and flour into separate plates. To start, you will dip the chicken in flour, then t...

How To: Cook delicious Cajun fried chicken

In this video, we learn how to cook Cajun fried chicken. First, season your cut up chicken with salt, then inject a Cajun marinade into the pieces. After this, take 5 tbsp of Louisiana chick fry and place it into a bowl with water. Now, dip your chicken into the batter sauce and then some flour. Once this is finished, you will be ready to fry the chicken. Heat up some oil in a large pot until it's around 350 degrees. Place the chicken in the pot and fry on both sides until golden brown and co...

How To: Make a ham, broccoli, and cheese casserole

In this tutorial, we learn how to make a ham, broccoli, and cheese casserole. You will need: 1.5 c cheddar cheese, 15 oz pasta, 1 tbsp flour, 1 large slice of ham, 1 large head of broccoli, and 2 c milk. Start by boiling your pasta in water, then wash your broccoli and chop it up into pieces. Now, preheat your oven to 250 degrees. Cut your pre-cooked ham into cubes, then slices your cheese into cubes. Now, place your milk into a large pan and heat it up. Then, add the rest of the ingredients ...

How To: Change a circuit breaker

In this video, we learn how to change a circuit breaker. First, turn the main breaker off so there is no running electricity. Then, go to the meter area around your circuit breaker system. With these, there will be wires running all around the entire system. With most breakers, you can pull them right out from where they clip in. There will be a wire connected to this which you can remove. Do this, and then connect the wire to the new breaker. Snap this back into place and make sure it's secu...

How To: Do a Chinese cupping back massage

In this tutorial, we learn how to do a Chinese cupping back massage. Cupping is an old technique that is still practiced in China and eastern Europe. First, set fire to some cotton balls. Now, place them into the cup and pull the air out of the cup. Quickly place the cup on the body and then push it around on the skin. This brings the muscle up to the top of the skin, leaving marks on the body temporarily. As you move them around, it's like you are getting a reverse massage that will make you...