Entails Placing Search Results

How To: Fix a wobbly chair

In this video, we learn how to fix a wobbly chair. First, you will need to flip the chair upside down to see what the problem with it is. After this, you will need to apply wood glue to the inside of all the joints on the chair. Next, you will need to push the pegs to the inside of where they belong and then wipe off any excess glue from where it leaked out from. Allow this to dry for several hours then flip it back over and test it out. If this worked you are done, if not, you will need to p...

How To: Paddle clay

In this video, we learn how to paddle clay. Start off by placing the clay on the wheel and turning it on so it's moving quickly. You wan tot make sure you are using a lot of water and keeping the clay moist, as well as your hand. Make sure the bottom is even around on all sides, or it will turn out off center. Place your hands around the clay and cradle it until it makes a round and even shape. Continue to do this until you can put your hands on the side of the pot and work your clay on the i...

How To: Make Ritz peanut butter cookies

In this tutorial, we learn how to make Ritz peanut butter cookies. You will need: almond bark, peanut butter, and Ritz crackers. First, take your crackers out and place peanut butter on one side of them. Next, place another cracker on top and make as many peanut butter crackers as you can. After this, cut up your almond bark and melt it in a double boiler, you can add food coloring if you prefer. After this, drizzle the almond bark on the top of your Ritz crackers. When this is finished, enjo...

How To: Install a foot throttle on your lawn tractor

In this tutorial, we learn how to install a foot throttle on your lawn tractor. First, weld the petal onto the base and create your own holder for the rod so it stays in position. You will have to bolt it down so it stays in place and doesn't move. On the other side, put a holder on it so the rod stays in place and doesn't move. There should be a bolt on it so it doesn't move and a clamp that is welded onto the end of it. The, string a thin metal wire to connect onto the end and bolt it onto ...

How To: Get 360 waves in your hair

In this tutorial, we learn how to get 360 waves in your hair. First, always have a brush with you so your waves always look good. Step two, make sure you always have a wave cap with you to twist over your head. Next, make sure you have 360 wave grease to help your waves stay in place. You can also wash your hair with Wash Waves, which will keep your hair waves in place after you take a shower. When you are in the shower, you will brush it in and then wash it out with your hands. Also, use Mot...

How To: Make hot wings at home

in this tutorial, we learn how to make hot wings. First, wash two lbs of chicken wings, then sprinkle with salt and barbecue seasoning. After this, mix the chicken up so they get evenly coated. Now, place the chicken onto a baking pan and bake at 425 degrees for 45 minutes - one hour. While these are cooking, place 2 tbsp sugar and 2 tbsp vinegar into a wok over medium heat. Then, add in 1 tbsp Chinese hot mustard and 1/4 c soy sauce. Mix this together and then add in as much hot sauce as you...

How To: Make a genuine Italian pizza at home

In this tutorial, we learn how to make Italian pizza at home! First, you will melt 10 grams of yeast into 220 ml of warm water. Mix together, then add in 340 grams of flour and 12 grams of salt. At this point, it's best to use your hands to mix the dough together thoroughly. Next, wet a towel and shape the dough into a ball. Now let the dough rest under the towel for 2 hours and when finished, turn your oven on and grease a piece of foil. Next, place the dough onto the foil and stretch it out...

How To: Properly tie a winter scarf

In this tutorial, we learn how to properly tie a winter scarf. First, take a long scarf and wrap it around the back of your neck. Next, take the short side of your scarf and place it in your left hand and place the long side of the scarf in your right hand. Now, cross the two and hold the bottom with your right hand. Next, wrap the long side around the back of your neck while holding the side with your right hand. Put the long side through the loop in the scarf and then pull down so the scarf...

How To: Install a ceramic soap dish in your bathroom shower

This video shows us how to install a ceramic soap dish in our bathroom shower. In this demonstration the instructor already had a slot in the shower tiles for the soap dish to go. Attach a long strip of masking tape on the edge of the soap dish. Mix some grout and place this on the part of the soap dish you are attaching. Be generous with the amount so you know it will stay. Place the soap dish in the slots and use the tape that you attached to be extra security that your dish will not fall. ...

How To: Make a mummy cake

In this video we learn how to make a mummy cake. We will need candy melts, eyeball mold, edible markers, a cake that has a crown on it, buttercream frosting, white fondant, sugar veil frosting, brown petal dust, a decorator brush, a cake round covered in foil, spatulas and knives. First you make the eyes. You can use the white candy melts to do this. You can use colored melts to make the irises. Put the melts in the mold and tap it to get the air out. Then put it in the fridge to harden the c...

How To: Make football cupcakes

This video from Family Fun shows how to make football cupcakes. You will need some cupcakes that you have already baked, some green frosting, white decorating gel and icing, fruit leather, pretzel sticks and chocolate covered almonds.

How To: Use Google Earth and explore the universe

This video shows how to download and use Google Earth. To download it, go to earth.google.com and click “Download Google Earth”. Then follow the directions according to where you want to save it, and it will automatically be installed. You will see an icon pop up on your desktop. Double click on the icon to open Google Earth.

How To: Fold an erupting origami volcano

This video is about making an origami of a volcano. The video begins with aliMcRose talking about the geographical formations of Japan and then she shows a finished origami. The materials required are one piece of two sided paper and a pair of scissors. Fold the piece of paper in half on one side and make sure the fold is a clear line. Now unfold the paper and fold it on the other side in a similar way.The piece of paper will now have four squares. Now fold these four squares into triangles a...

How To: Make a delicious homemade wholemeal pizza

In this video, we learn how to make wholemeal pizza at home. You will need: 3 c wholemeal flour, 1 tbsp yeast, 1 pinch of salt and sugar, small amount of olive oil and 1 1/3 c water. First mix all dry ingredients together, then add oil and water little by little until it makes a dough and everything is well mixed together. Now, flour your hands and your surface and place the dough on top of it. Knead the dough until it is a dough consistency. Now place the dough into a bowl and put a damp clo...

How To: Hold your guitar pick in two different ways

Before learning how to play a guitar your going to want to know how to hold your guitar pick. First there is the one finger hold, this looks like you're making a fist. You don't want to make a hard fist but a loose one, not a of strain should be put on the hand. Move your thumb down a little and your first finger too so that it looks like a ribbon or a bow. You have to line up the edge of the pick with the edge of your index finger. Once that is done adopt the hold defined above to complete i...

How To: Find the percent sign on a BlackBerry devices

This video shows us the method to find the percent sign on Blackberry. The first step involves going to a place on the Blackberry where text can be inserted. This place is ideal for inserting a % sign. Look in the keypad carefully. There are various keys in it. Search for the key named 'SYM'. SYM stands for symbol. This key is helpful in typing various symbols in the text to be entered through the keypad. When the 'SYM' key is pressed, it opens a window containing various symbols. The % sign ...

How To: Properly break in a baseball glove

This video gives you four steps on how to properly break into a baseball glove. If a glove isn’t correctly broken into, it may affect a player’s performance. The first step is to condition the leather, softening it by adding either glove oil or cream. Remove any excess oil with a paper towel. Make sure to repeat this step throughout the year. The second step is shaping your glove by placing a ball where you would normally hold a baseball and then tying two large bands around the glove in ...

How To: Make a diabetic friendly millet breakfast cereal

The Tree of Life Rejuvenation Center has created this instructional video on how to make a diabetic friendly millet breakfast cereal. You will need almonds, cinnamon, shredded coconut, and hemp seed. You can make your own milk out of the almonds, coconut, or hemp or you can purchase almond milk. Place one cup of millet of two cups of water in a pot and heat it up on the stove. It will take about 15 minutes for the millet to cook. To make the almond milk, soak the almonds for 24 hours prior. P...

How To: Put together a rose bridal bouqet

Weddings are very expensive and one way to say a little is to make or have you maid of honor make the wedding bouquet and the bridesmaids’ bouquets. You need a straight handle bridal bouquet holder and a stand to hold the bouquet holder in place while you work on it. You will need 12 roses fully hydrated and open.

How To: Grill some BBQ beef short ribs with the BBQ Pit Boys

This technique uses indirect heat. When cooking the ribs make sure to place the coals over to one side in the grill. When choosing your meat make sure to get bone in beef short ribs. First coat ribs well with your favorite dry rub. Then cover them with olive oil. Next sear the ribs on all sides in direct heat. Once they are seared you then place them in to a pan on the side of the grill without the coals. Next pour chicken broth over the ribs. The liquid is what tenderizes the ribs. You do no...

How To: Perform an interrupted and a subcuticular suture

If you want to perform an interrupted and a subcuticular suture you should first make a bite through the skin. In order to make a bite through the skin you should put the needle point perpendicular to the surface, turn your wrist and make sure it arrives at an even point from the entry point. Grasp the needle as it comes from the tissue. Make sure you always keep the needle in view. Then ti e the suture with an instrument tie and form the knot on the side of the wound so it does not effect th...

How To: Make healthy, yummy dog treats at home

In this how-to video, you will learn how to make dog treats and biscuits. These have no preservatives, colors, or artificial ingredients. Turn the oven to 350 degrees F. Take 24 oz plain flour, 2 eggs, 8 oz oats, 2 tablespoons chicken stock, 16 oz chicken livers, and a cup of water. Blend the eggs and livers with the lid on until smooth. Mix all the dry ingredients into a large bowl. Use your hands. Make a well shape in the dry mix and blend the wet mixture in. Work into a loose dough. Knead ...

How To: Install memory in a 13" MacBook Pro (2009)

This video demonstrates the installation of memory in a 13” Macbook Pro (mid 2009 model). It’s easy to perform and takes about 10min time. You’ll require a #00 Philips screwdriver (available in the Newer Technology 11- piece tool kit). Take care to work in an anti-static work space. Close the Macbook Pro and flip it over with the hinge side up. You can note 10 screws along the border. Start unscrewing the 3 screws on the right on the top edge, these are longer than the rest. Now unscrew the r...

How To: Install RAM in a new MacBook Pro

It only takes 15 minutes to install new RAM in a Macbook Pro. Before starting, remember to make sure that the power is off. Turn it over and release the latch in the left hand side. This will release the door and expose the battery. Remove the battery. With a #00 Philips screwdriver, remove 4 small screws lined up on the top of the opening. Next, remove the other 4 screws on the other side next to the hinge. When that is done, remove the cover. You will see the RAM directly in the middle. On ...

How To: Install a hard drive in a 13" MacBook Pro (2009)

To install a hard drive in a 13" (13 inch) Macbook Pro laptop computer released in 2009 you will make sure to first transfer all data off the drive then discharge any static electricity from your hands making sure your are in a static free work environment. Next you will remove the old hard drive, to do this flip over the laptop and remove the 10 screws around the edge of the device with a #00 Phillips screwdriver starting with the three longer screws on the top right. Next, lift off the bott...

How To: Prepare eggs benedict with hollandaise sauce

This video is about how to make Eggs Benedict with Hollandaise sauce. The first step that you will have to do is to make clarified butter for the Hollandaise by melting 4 sticks or 1 pound of butter. Add butter and simmer slowly. During the heating of the butter, skim off the frothy layer top. Don't forget to skim every two to three minutes. Then after heating, place it in a measuring cup. The next step is to add vinegar to a simmering water. Then, separate three egg yolks. After separating, ...

How To: Install a hard drive in a 15" MacBook Pro (2009)

In this video from MacOSG we learn how to install a hard drive in a 15" Macbook Pro from around 2009. For this you need a #00 Phillips head screwdriver and a T6 Torx screwdriver. Make sure you use proper anti-static precautions with this. Transfer your data to the new drive before installing. To remove the hard drive, flip over your Macbook. Use your Phillips to remove the 10 screws. Remove the 3 at the right which are longer than the other screws. Then remove the left most screw which is the...

How To: Install memory in a 17" MacBook Pro

This video from OWC presents how to install memory in a 17" Macbook Pro.The operation will take about 15 minutes and doesn't require an experienced user.First you need to provide all necessary anti-static precautions - discharge static electricity, use static-free surface.You'll need #00 Phillips screwdriver and nylon pry tool.You can find these in the Newer Technology 11-piece tool kit.To start, shut down the computer, close it and flip it over.You will need to remove 10 screws. Use #00 scre...

How To: Make delicious shrimp fajitas

In this video, Jennifer teaches us how to make Latin heat shrimp fajitas. Ingredients are: onions, peppers, shrimp, olive oil, butter, lemon juice, Latin heat rub, salt and pepper. First, place sliced peppers and onions along with Latin seasoning and olive oil into a bowl. Stir these together and then place into a warm pan. Cook these until they are tender, then add in 1 tbsp of butter. Move the veggies onto the side of the pan and then add the shrimp with Latin heat seasoning into the middle...

How To: Make classic American pot roast

This video is about how to make a classic American pot roast. You start with a chuck roast. You want to start by generously salting and peppering both sides. Heat about 2 tablespoons of canola oil in a skillet and then brown the roast on both sides. Then remove it from the pan and add an onion that's been cut into 8 wedges, 2 carrots that have been cut and peeled into 2 inch pieces. Add a few pieces of time and rosemary. Once the vegetables have a good color you move them to the side and add ...

How To: Make a CD cover in Photoshop

This video is about how to make a CD cover. First, open up the image that you have. Then, you need an action script. Click on the action's palette and pick which CD cover you want to do. Then you click step one which will run a template for you to set everything up and place your graphic in. The next thing to do is to slide the graphic image on to the template through the select tool. Then, click free transform found on the edit toolbar and just double click the image. The next step is to edi...

How To: Replace a hard drive in a 15" macbook Pro

The video starts by informing about the basic safety precautions, tools needed and backing up data prior to hard drive replacement. There are a series of screws which need to be removed in the following order.1. Removing the battery from the back and then remove three screws thereby removing the RAM cover.2. Two more screws to be removed under the RAM cover.3. Two screws from inside front edge.4. Four screws from the bottom rear.5. Two screws each from the slim sides.6. Two screws near the hi...

How To: Install memory in a 2009 Mac Pro

MacOSG demonstrates how to install memory in a 2009 Mac Pro. When performing this upgrade, be sure to take precautions for static by discharging static electricity before beginning. Shut down, unplug and place the Mac Pro on a static-free surface. To access the memory, you need to open the side access door by lifting the latch located on the rear of the Mac until it locks in the open position. You can then the door forward and then remove from the body. The memory is attached to the processor...

How To: Set up a classic A-Frame tent

There are tons of quick pop up tents available nowadays, but the classic A-Frame tent still remains one of the most popular. A-Frames are those classic tents with the spikes in the ground that hold it up. They take a little more effort to erect but they are perfect for backpacking or short camping trips.