Evaporator Coils Search Results

How To: Create jump rings in three minutes

Karen Bratt demonstrates how to make jump rings for jewelry and key chains. To prepare jump rings the things required are a coil of silver plated wire, a pair of round pliers and a pair of cutting pliers. Take the coil of silver plated wire and place it at the wider end of the round pliers. Slowly bend the wire and form a circle around the pliers such that the wire coils. As you bend allow the coil to come up the beaks of the pliers until you make half a dozen of jump rings. Take it out of th...

How To: Shield your pickups cavity on your electric guitar

Single coil pick ups are notorious for being noisy and for having a lot of buzz. One way that you can get rid of the buzz and save yourself from sounding annoying and unprofessional on stage without messing with your volume knob or buying expensive noise gates is putting in copper shielding in your pick up cavities and on the pick guard! In this video you will get a complete walkthrough of how to install the shielding and rewire your guitar back to normal!

How To: Lampwork a glass curly-Q

This instructional lampworking video shows how to make flame worked coils of glass.Use a rod of cold, thick glass to wrap the curly-q around. Using a thin, molten string of glass, feed the melted glass into the torch flame as you slowly turn the cold glass rod. This will create a quick and delicate glass coil.

How To: Take in coils when climbing

As the terrain changes in the mountains you will often have to change rope lengths to max out your safety. It is common to travel a good distance apart on a glacier or use large amounts of rope when dealing with technical terrain. However when traveling together on a ridge it is often safer and faster for both climbers to take in a few coils.

How To: Build a DIY electromagnet for cheap

This video shows the viewer how to make an electromagnet using common items. This is done using a broken microwave, a spool, a cordless drill, a battery and a coat hanger. The microwave transformer is dismantled and the enamel insulated wire is removed. Using the cordless drill the wire is then coiled around the spool. The iron coat hanger should then be cut into small pieces and placed in the middle of the spool. It should be secured tightly. The battery was then connected to the wired coile...

How To: Tie a paracord storage sinnet

In this video, we learn how to tie a paracord storage sinnet. First, coil up the paracord and then form a bight with the working part at the top of the coils. Next, create a loop from the bight and pull the loose part underneath this and pull it underneath the loop you created. Now, tighten the new loop up and then take the loose part and place it underneath to create a new loop. Push this through the other loop, then tighten with the loose end. This is a very difficult knot to do and is not ...

How To: Find the best mouse trap for you

Mouse traps have come a long way from the simple coil that snaps down on the rodents. Make sure you're choosing the mouse trap that best suits your needs by watching this video from Ask the Exterminator. This video will show you how to find the best mouse trap for your needs.

How To: Work with jewelry making memory wire

In this tutorial, we learn how to work with memory wire to make jewelry. This is a coil material that remembers its shape and comes in a variety of different sizes. First, decide how thick you want your jewelry piece to be, then cut the excess wire with wire cutters. Next, apply a drop of superglue to one end of the coil followed by a Memory Wire end cap and let dry. Now, string your beads onto the wire. When finished, put a bead stopper onto the wire and apply glue to the very end with anoth...

How To: Make an easy paper flower with cut paper

In this video you can learn how make an easy paper flower. Cut the card stock into strips of paper that are either 1/8 inch, 3/8 inch or 1/2 inch wide. The width doesn't really matter, but all the strips must be the same size. Use scissors to cut slits 3/4 of the way through the paper strip, creating a fringe along the entire edge of the piece of paper. The smaller the distance between cuts, the more realistic and delicate the flower will appear. Insert the end of the paper fringe 1/4 inch th...

How To: Make chainmail quickly

Like A Flint demonstrates how to quickly make chainmail. First, find heavy gauge wire at a construction site or a craft store. Then, wrap the wire around a dowel or a tube until it forms a coiled spring. Remove the coiled spring from the tube and clip the spring into rings with a pair of wire cutters. Using two pairs of pliers, open up the ring and thread four rings inside of it. Close up the ring. Keep adding rings on top of rings until you achieve a chainmail like design. The process of mak...

How To: Pitch a pop-up tent the easy way

Pop-up tents are much more convenient to pitch than the tents of old, but doing it for the first time is still tricky. Watch this video to learn how to set up both types of pop-up tent: the umbrella style and the coiled-spring style.

How To: Model with curve, sweep & skin nodes in Houdini

See how to build a simple coil spring using the curve, sweep, and skin nodes in Houdini. Whether you're new to Side Effects Software's popular 3D production program or a seasoned graphic artist just interested in better acquainting yourself with the application, you're sure to be well served by this free video tutorial. For more information, including detailed instructions, take a look.

How To: Paint a Fender Telecaster electric guitar

This video will show you the steps to wire in a humbucker and coil into a Fender Telecaster electric guitar. And you'll get to learn how to paint it as well! What's humbucker? Well, it's a type of electric guitar pickup, that'll help you improve your rocking out. What are you waiting for? Get some sandpaper, paint, wires, and get started!

How To: Make chainmail

This instructional metalsmithing video demonstrates the basics of making chainmail. Making traditional chainmail is a long and involved process. First, you must spin the wire into a spool. Then you have to cut the coil into individual rings. Embark on the long process of closing and linking the metal rings.

How To: Make Zutter binding for book making

Watch this instructional book making video to make a Zutter binding for your hand made book. A Zutter is a tool for punching in coil binding. Choose the paper and binding material that your would like to use for your book. This is an easy way to make spiral notebooks and bound books for gifts, school projects and manuscripts.

How To: Make a homemade eco-friendly air conditioning

Fans do a pretty good job of cooling you down in the summer but sometimes only an air conditioning can do the job right. In this tutorial, SuChin Pak and Daniel Sieberg demonstrate how to make a homemade air conditioning system with a fan, coil and ice water. Save the environment while staying cool in the summer with this DIY air conditioning.

How To: Do quilling

Corinne Bradd helps Kristy Clarke get to grips with the tricky art of quilling. Using thin strips of brightly coloured paper and a quilling tool, she shows how simple it is to coil gorgeous, dimensional floral motifs.

How To: Achieve good soldering joints

Learn how to solder wires with this video. Clean the area to be soldered, scraping the wire down to bare metal and then wiping it clean with alcohol or acetone. Use rosin-core solder for electronic applications. This solder normally comes in coils. Tin (coat with solder) the soldering tip first: Wrap one or two inches of solder around the tip while the iron is cold; set the iron to the solder's temperature range; and allow the solder to melt. Clean the tip with a sponge. Set the soldering too...