Excessive Weight Search Results

How To: This DIY Steampunk Toothbrush Timer Tells You When You're Done Brushing Your Teeth

If you're a steampunk enthusiast looking to give your bathroom an extra kick, this just might be the project for you. This stylish and functional "vintage" toothbrush timer knows when you've grabbed your toothbrush, and will visually count down two minutes before alerting you when you've brushed long enough. All you'll need to put one together yourself is a microcontroller (the designer used a ATmega328p), a weight sensor, light bulbs, brass cups and a tray, an alarm clock's chime, and some w...

How To: Mount a horse properly to prevent injury

Julie Goodnight guides you through how to safely mount and dismount a horse. First make sure you put the reigns up over the horses head. Keep the reigns in your hands so you always have control of your horse. Check the cinch on the saddle before putting your foot in the stirrup. Make sure the horses feet are square so it can properly brace when you go to mount. Stand to the front of the horse, facing the rear, so you can see the legs at all times. This will also discourage your horse from ste...

How To: Lose weight and gain muscle with quinoa

In this video author introduces a new grain called quinoa which is considered very healthy and has good nutrition values. Quinoa is rich and proteins and fibers and low in fat. It is Excellent food for muscle builders and someone trying to lose weight. Quinoa basically is tasteless but you can add flavor to it. It is very easy to cook quinoa. We need to wash quinoa and mix with double quantity of water. We also need to add a little bit of salt. Author adds freshly cut salsa to mixture of quin...

How To: Keep a lordotic curve in your back when bench pressing

Proper form is very important to lifting weight and strength training. One wrong move could potentially lead to an injury. Follow along in this how-to video critique by Mark Rippetoe as he guides someone through the correct lordotic arch position in bench pressing. Better posture can lead to more effective lifting. Learn to maintain the lordotic curve in your back when doing a bench press.

How To: Do stiff arm lat pull downs

Keep arms stiff for lateral pull downs. Learn exercises for the lats in this training video. Take action: this is a great exercise for swimmers or surfers, keep shoulders back and arms straight, but do not curl shoulders. Michelle, the instructor in this how-to video, is a personal trainer at a gym in NC and has been a personal trainer for several years. She is certified through ACE and is a certified aerobics instructor as well. Her Specialty is weight lifting and she enjoys training aspirin...

How To: Do the good morning exercise with a barbell

Have you tried working out with Good Morning Exercises? The Good Morning exercise done with a barbell is an essential part of strength training. This fitness how-to video demonstrates use the "Good Morning" exercise to strengthen the core and increase flexibility. Learn how to do this exercise with a barbell in this training video.

How To: Do a breakdance crab walk

In this video, we learn how to do a breakdance crab walk. Start on the ground, bringing the feet into the air. Then, bring the left hand back and your right hand out in front of you. Lean side to side to help you shift your weight. You need to get comfortable with both crab freezes before you will be able to do this completely. Next, you will start to switch your arms while you are doing this, with your legs still up in the air. This takes upper body strength to do, but can be combined with o...

How To: Give a Swedish massage

In this tutorial, we learn how to give a Swedish massage. First, you want to start off by making sure your client is comfortable. Next, you will start to gently rub the body, starting circulation. After this, put cream on your hands and rub them together so it gets warm. Now, rub the client's body with the cream, pushing in the body in the middle of the back. Use smooth strokes, because these will warm the client up. Now, use your elbows and place them along the spine, pushing your body weigh...

How To: Do the dip in hip hop dance

This is a video tutorial that is showing its audience how to perform a dip while doing a hip hop dance. The first step is to push your weight towards your right foot with your knee bent. Then drop down onto your new and then come back up. Next you should practice this while counting. Next you should speed up your dancing. Instead of using a full eight count then this time use a four count. Next you should go in tempo with your move. Keep practicing until you have the move perfect. Finally you...

How To: Build arm strength for pitching

In this how to video, you will learn how to build up your arm strength for pitching. This involves using exercises that give you more focus on the muscles you will use for throwing. A high cable curl and crunch is a useful exercise for doing this. It involves gripping the rope on a weight machine and combining two different exercises together as one. You first start out with a curl, and then move on to a crunch. Repeat this for as many times as necessary. This will help you get a little extra...

How To: Use a jump rope drill to alleviate golf pull shots

In this video tutorial, viewers learn how to use a jump rope drill to help prevent golf pull shots. When beginning a swing, some people tend to rock the right shoulder upwards which doesn't get it far enough from the target line and causes the down swing to go out and over the target line. When swinging, make the right shoulder go straight backwards away from you and put the weight on your left heel. To perfect this, loop a jump rope over a fixed object. Then alternated and pull one end of th...

How To: Correctly use the 8-step golf swing

Jim McLean shows us how to do an eight step swing in this video. You start the swing in the "address" or universal position. The first step is to move the club three feet back from the ball in a uniform motion. Position two is moving the club half way back where the club is pointing down the target line. Position three is a three quarter golf swing is when your elbows are level and the shaft of the club is pointing into the plane line. Position four is preparing to swing forward. Position fiv...

How To: Close your golf stance to cure a golf pull shot

In this video tutorial, viewers learn how to close the gold stance to cure a golf pull shot. When starting the swing, do not turn your body before you shift. This may be called spinning out. This will make the club go outside, before going down to the ball. Therefore it creates a left swing that will curve around the pole. When swinging, move the weight from your left heel to your right toe. This will cause the user to shift forward straight swing. This video will benefit those viewers who en...

How To: Bridge with an exercise ball

In this video from diethealth, viewers are shown how to perform a bridge with an exercise ball. The process begins with the user lying flat on their back, and having their legs positioned on the ball so that their knees are bent. Then, they must lift their hips so that their spine is in a neutral position, and then lowering it back to its previous position. Along with the lifting, they must inhale with the lifting and exhale with the descent, while tightening their gluts and shifting the weig...

How To: Use the UV Peeler tool in Modo 301

Go beyond the traditional 3D workflow to an immersive creative experience with the software Modo, created by Luxology. Modo is the next evolution of 3D modeling, painting and rendering for Mac and PC. Modo includes 3D sculpting tools, animation and network rendering, and advanced features such as n-gons and edge weighting.

How To: Use the Symmetry for UV tool in Modo 301

Go beyond the traditional 3D workflow to an immersive creative experience with the software Modo, created by Luxology. Modo is the next evolution of 3D modeling, painting and rendering for Mac and PC. Modo includes 3D sculpting tools, animation and network rendering, and advanced features such as n-gons and edge weighting.

How To: Use the UV Unwrap tool in Modo 301

Go beyond the traditional 3D workflow to an immersive creative experience with the software Modo, created by Luxology. Modo is the next evolution of 3D modeling, painting and rendering for Mac and PC. Modo includes 3D sculpting tools, animation and network rendering, and advanced features such as n-gons and edge weighting.

How To: Practice a knee drill for pitching in softball

In these three sports how-to video, Farmington (MN) HS assistant softball coach Melissa Langer demonstrates three parts of a throwing drill, from the knee, for pitchers. Being able to throw from the knee give a pitcher good balance and coordination. Follow along and learn how to do this knee drill that can also be done with a weighted ball.

How To: Do a weight shift drill for hitting in softball

An important part of softball is being able to keep your weight on the back part of the foot. A bad tendency however is to shift the weight to the front food while hitting the ball. Farmington (MN) HS head softball coach Heather Ballstadt demonstrates a weight shift drill for hitting in this sports how to video.

How To: Give a massage with the petrissage technique

Petrissage strokes are a special technique of massage. Petrissage is mostly kneading like you're kneading bread. Just like if you had a big loaf of bread and you're just kneading that bread, all that flour coming in. I'm using the bottom V, corner V of your palms, wherever your pinkie comes in to touch with your thumb, and that's basically what I'm using with my hands. Learn the art of giving petrissage massage in this health how-to video.

How To: Tie a tarbuck knot

The tarbuck knot is a non-jamming knot, great for when the rope will be bearing a heavy load, and shocked with sudden weight. Form the loop around the winch then make a serises of turns around the standing part in a clockwise direction. Bring the running end down to the base of the runs and make another clockwise turn finishing off with a figure eight through the exiting strand from the top turn. Watch this video knot-tying tutorial and learn how to tie a tarbuck knot.

How To: Do the bodybuilding incline dumbbell fly for chest

This Scooby's Workshop video shows proper form of the incline dumbbell fly exercise for pecs. Fly type exercises have done far more for my pec development than the pushing type exercises. In doing flys, make sure that your arms do NOT go behind the plane of your body as this puts too much stress on the shoulder joint. If you don't have a incline bench, you can make one as I have done here by tying a 2x8 securely to a coffee table. This exercise is best done with a spotter for safety, if you m...

How To: Do a killer home chest workout

Here is a great chest workout you can do at home with a cheap dumbbell set. Big gyms are nice but when you can get a killer workout at home without the overhead of getting to and from the gym. In this chest workout we are going to do pushups, then with no rest immediately do flys, then with no rest immediately do dumbbell press. Make sure and use a much lighter weight than you usually would on the flys and dumbbell press because after the pushups you wont have much left in you. After doing th...

How To: Sprout nuts and seeds

Wants to add more nuts and seeds to your diet but don't know the best way to incorporate them? With this video tutorial, let Kardena from Kardena's Kitchen show you how to get the most out of a variety of nuts and seeds for maximum flavor and nutritional value.