Extra Feet Search Results

How To: Bait a fishing line with a lure for deep sea fishing

Mark the Shark demonstrates how to bait a fishing line with a lure for deep sea fishing. Use a three to four foot 50 pound test leader when deep sea fishing. First, put the line through the lure and tie on the hook. This technique is good for high speed trolling when the boat is moving fast because the lure will look like it is live bait. You can also use live bait like herring with a single hook. Thread the hook right through the nose of the fish so that the herring can stay alive all day. L...

How To: Avoid slicing with your driver off the tee in golf

In this Golf video tutorial you will learn how to avoid slicing with your driver off the tee in golf. First and foremost make sure that your grip is correct. The next point is allowing the club to sit on the ground the way the manufacturer wanted it. The next important lesson is to ensure that your feet and your shoulders are aligned straight down the target. And the last and the most important point to remember is to swing back to the ball with your hips first. Don’t use your arms first. If ...

How To: Use a good delivery position in your golf swing

This Sports video tutorial will show you how to get a good delivery position in your golf swing. This video is from Golf Link where in Adam Hill talks about the delivery position. This is the position you attain right before you get into the hitting area or the impact zone. From the top of your back swing, the delivery position is that point where the club shaft is parallel to the ground during the down swing. A good delivery position is when the right elbow and the right knee have kicked in ...

How To: Correctly use the 8-step golf swing

Jim McLean shows us how to do an eight step swing in this video. You start the swing in the "address" or universal position. The first step is to move the club three feet back from the ball in a uniform motion. Position two is moving the club half way back where the club is pointing down the target line. Position three is a three quarter golf swing is when your elbows are level and the shaft of the club is pointing into the plane line. Position four is preparing to swing forward. Position fiv...

How To: Improve your golf swing for consistency

This video tutorial is going to show you how to improve your golf swing for consistency. Here you will get three swing tips for driving the ball to make you more consistent. The 1st tip is on the takeaway. The takeaway should be one smooth piece. You should not take the club up too early. The 2nd tip is to keep the head steady. Quite often golfers take their head too far away from the ball. Don’t move the head away from the ball as you swing your club back. The 3rd tip is to hold the swing on...

How To: Hit a golf ball far

Ken demonstrates how to hit a golf ball far. A golf shot starts with a good grip to give it power and flexibility. Grip the golf club under the heel pad creating a 45 degree angle. When the wrist flexes and hinges, the angle will be 90 degrees which will give you power and speed. This promotes flexibility, control and a desirable centrifugal effect. Create speed through motion. Keep your feet together to keep your body quiet and you will increase the speed of your hands and arms. It will also...

How To: Perform a simple ankle tape job

Sports medicine skills can be tricky and confusing. This video shows you how to tape an ankle correctly to immobilize the joint and keep it protected. You'll learn rules about where to tape and where not to tape. Tension is important and this instructor covers where to add tension and where not to. Using a few simple techniques, you'll learn how to wrap safely from below the calf and down the foot. Learn a few taping techniques like the figure eight, anchoring, stirrups and basket weaving to ...

How To: Build a rad kicker launch ramp for skateboarding

Watch this video to learn how to build a launch ramp. Step by step process to building you very own wooden launch ramp for skating or biking! Fast and economical way to have fun while skating! First make sure to draw a stencil to make cutting the wood easier. To save money you're going to want to get 2 cut-outs from each sheet of wood. You will need 7 or 8 two foot 2x4's to connect the outer shells. Next you put 3/8" sheet of plywood on top to finish you ramp! To make it even easier try getti...

How To: Perform inner thigh extensions with an exercise ball

Diet Health shows viewers great exercises that will work well for the legs, thigh and specifically the inner thigh. These will require that you use an exercise ball. First, you will want to lay flat on the floor. Your back should be flat as well as your arms laying flat to your sides. Lift your legs so they are bent at the knee with the exercise ball being held in between your feet. You will want to squeeze your inner thighs to keep the ball in place. Keep your knees in the same place as you ...

How To: Improve posture to cure golf push shots

In this video Chuck Cook shows how to correct the push shot posture. He demonstrates that the correct posture for the shoulder should go down and out toward the ball which drives the club head around back to the left. To obtain this posture, stand with the feet shoulder width apart, the back should be straight up. Take the club handle and stick the end into your belt buckle with club head sticking straight out. Next extend the arms straight out keeping the club at the level of your belt buckl...

How To: Create a sweetheart rose wire anklet for a wedding

The video shows the making of a rose wire anklet for a wedding. The flower guy in the video takes a string a kind of lengthy wire and makes a small round shape in one end of it, then he inserts the other end through the upper front side of the lady's sandal so that the small circle fits exactly in the portion above the toes, then he glues a red rose and a rose leaf and fixes it in the circle with glue, then he puts the other end of the wire around her leg just above the foot, makes about two ...

How To: Finish a lidded clay box

Simon Leach of Simon Leach Ceramics shows how to finish a lidded box, thrown on a potter's wheel. When cutting into the box, make sure to do so with a cut slanting downwards so that the lid is less prone to falling off. Proceed to smooth off the exterior of the box, beginning where the two halves meet. Once the outside is smoothed, the fit of the two parts is probably not perfect, and so the joint between the two can be smoothed off. Carved features such as scalloped footing may now be added....

How To: Do Running Man basics

This video shows you how to do the basic Running Man dance. 1) The Lift First, it is better to start with right foot on backside. Lift your right foot and slide your left foot back a bit at the same time with knee in the middle.

How To: Build a vertical axis wind turbine

The economy is down, so what's one way you can save money? Build a vertical axis wind turbine! This eco-friendly four-part video tutorial will show you just how to make one so you can save money. These are detailed steps for making the vertical axis wind turbine. The blades can be easily interchanged offering different shapes and materials to experiment with. This design can create turbines up to 90 inches in diameter and up to 15 feet tall.

How To: Teach the BEEF method of shooting in basketball

In this sports how-to video, Farmington HS boys basketball coach Shane Wyandt explains how he teaches the BEEF method of shooting. The work BEEF is an acronym for a ball shooting concept in basketball. The B stand for balance, the E for eyes, the second E for elbows, and the F for follow-through. To have good balance it is important to have you feet about shoulder width apart. Your eyes should always be focused on a target, and your elbows should be in line. Finally follow through means it sh...

How To: Count cards for Blackjack or 21

Want to know how the pros beat the casino at Blackjack or 21? In this gambling tutorial a professional card counter instructs how to count cards and beat the casinos. This technique is not foolproof but often works very well. With the method in this how to video and a lot of practice you will be able to count cards like the kids from MIT. Just don't get caught counting cards or you'll never step foot in Vegas again.

How To: Carry duct tape while on the trail

Russell Weekend Adventurer explains how he carries duct tape on the trail while hiking to fix little unwanted problems like tears and such. This how-to video is good whether you plan to live in the wilderness, camp overnight, or take day trips. Why put duct tape on your water bottle while hiking? Duct tape fixes a lot of things. Use about three feet of duct tape so you can pull it off and apply it to blisters or your tent.

How To: Burn fat with a plyometric weight loss routine

How do you amp up your current cardio/strength training routine to make sure you burn extra calories and shed extra fat? By jumping. Though jumping sounds easy, after you try this routine and repeat it a few times we'd be surprised if you weren't completely winded and sweaty. Do these exercises after your usual routine to really kick things up:

How To: Grow wheatgrass for your animals

Wheat grass is very nutritious for animals like dogs. In this video, we demonstrate how easy it is. The first step is rinsing seeds with water and letting them soak over night for 8-12 hours. After they have soaked, rinse. Evenly place the seeds on a bed of soil in a tray and cover with a paper towel. Then water thoroughly and cover with another tray. Keeping the seeds moist is very important. You should see results in 3 days when you can remove the extra tray and the paper towel. We then dem...

How To: Draw the Lewis dot structure for sulfate

TTUchme1010 teaches viewers how to draw the lewis dot structure for sulfate. The formula for this is SO4^2-. 2- means we will have to add 2 electrons into the lewis dot structure. First, we will have Sulfur in the middle with Oxygen surrounding it. Sulfur is in group 6A so it have 6 valence electrons and oxygen has six, so fill this all in around the elements. Now, you have to add in the 2 extra electrons onto the most electronegative atom. This will be oxygen. Now, you should start bonding t...

How To: Weave paper for origami and other paper crafts

This video shows how to weave paper. This paper can then be used to make crafts such as origami. You may want some supplies: a cutting board, a paper cutter, scotch tape, and square origami paper (6"x6"). Start with two sheets of paper. Cut the paper into thin strips, 1/2" each. Reassemble one of the squares. Carefully align the pieces close together. Place a piece of tape on the top, and tape it to the cutting board. Take a strip of the other color paper, and weave it through every other str...

How To: Cheat on a test with help from your iPod

Watch this video to learn how to cheat on a test with help from your iPod. Ask a trusted friend for their notes/answers the night before. Then at your computer, just type up their notes/answers, or the important parts, and then save it in your computer as "How to make Grandma's Secret Fudge Brownies.txt" . Now plug your iPod into your computer and click Start- My Computer- (someone's iPod- Notes. Now you will need a separate window. Click Start- My Computer. Now find "How to make Grandma's Se...

How To: Create a sexy vampire look

This video shows the user how to give a woman a 'sexy vampire' look. The video shows this in distinct steps. Step 1: Apply a light but natural foundation to the face and neck, and to the shoulders if a strapless top will be worn. Step 2: Apply large false eyelashes. Step 3: Dark lip pencil with the line outside of the lip. Step 4: Add deep red lipstick. Step 5: Layer on dark, ‘almost black’ lip gloss. Step 6: Highlight cheek bones with blush applied with an angular brush. Step 7: Shape eyebro...

How To: Master the gusset stitch for knitting

Stay tuned for this knitting instructional video on the gusset stitch. When you knit the heel flap, you slipped a stitch at the beginning of each row. This made a very nice chain through which you can pick up the gusset stitches. You can either pick up stitches through the whole chain stitch, or through the back loop of the chain stitch. Picking up stitches through the whole chain stitch creates a rather definite seam on the inside which could be uncomfortable to wear. I prefer to pick up the...