Falling Prey Search Results

How To: Get down from a floating island in Minecraft

In Minecraft there is a possibility of spawning on a floating island in the world. And although this is rare, it does happen, and it can be frustrating being stuck on one single platform while not being able to get down to the world below you. Instead of falling down and dying, this video gives you a safer alternative. In it, you will learn how to build a large pillar of sand and then ride it all the way down to the surface.

How To: Make a pit trap for animals in Minecraft

The animals in Minecraft can either be scarce or very abundant, but a cool way of cutting out the mundane process of searching for them are creating a pit trap. The easiest way to lure them using a path of torches that will lead them into falling into a deep pit that they can't hop out of. Round them all up over night and then prepare for the slaughter in the morning! In this video you will get a basic walkthrough of how to do exactly that!

How To: Rig a counter weight trap

In this tutorial, we learn how to rig a counter weight trap. This is great as a fishing trap but can be rigged to be used as a tree trap. First, you will need to take a rock and wrap around it to create a counter weight. After this, bring the rope high over a branch, then down onto a lower branch. From here, wrap the rope around the trap and leave the rest of the string hanging. Now, the rock should be hanging high in the air and there should be a stick tied to the bottom of the rope to keep ...

How To: Get out of Apennine Mountains in Assassin's Creed 2

First go to the Apennine mountains and ride the horse to where video is showing. you will find a bridge, move the horse as shown. It may take some time but keep trying, you will hit the right space soon. Now try to hop the horse down. After a while, it will hop straight down but if it does not, keep trying at the same spot. Finally you will fall down the bridge and under the map. If you step out the horse, it will let you float away. If you would keep the horse on bridge, it will let you ridi...

How To: Repair an iPod Nano 4th Generation

In this tutorial, we learn how to repair an iPod Nano 4th Generation. First, remove the top and the bottom bezel from the device using a small and flat tool. When these are removed, switches will fall out, make sure to set these aside in a safe area. Now, remove the Philips screws that are in the top and the bottom of the device and set them aside. You will be able to take apart the top from the bottom now. The dock connector will be inside where the motherboard and circuits are at. Repair th...

How To: Get a girlfriend using gambits

In this video, we learn how to get a girlfriend using gambits. There is no one line that will make every woman fall in love with you. It's a process, and gambits are a significant part of the process. The first gambit is to do a thumbwar with a girl and make sure you lose so she wins, this will make her laugh. Gambits are perfect opportunities to tease the girl. Also, get close to her and show intimacy without being too creepy. Do another tease telling the girl she looks bored, and offer ways...

How To: Do an Arabian peacock makeup look

In this tutorial, we learn how to do an Arabian peacock makeup look. First, add primer to the eyes, then apply yellow shadow on the inner crease of the eye. Then, take a lime green color and apply it next to the yellow, blending in on the edge. After this, apply a turquoise eyeshadow and pack it in to eliminate fall out. Blend this outward, blending with the other colors. Apply a piece of tape on the outer corner of the eye to create a cat eye. After this, apply a dark purple to the crease of...

How To: Properly form a hamburger patty for a perfectly cooked burger

Are your hamburgers always falling apart on the grill? Does that meat ever even make it that far? Something could be wrong with your forming technique, and Chatelaine is here to show you how it's done. For a perfectly formed burger, make sure you even distribute you ingredients, mixing the meat with your hands or a fork. Try not to over-mix though, cause you will toughen your burger. Check out the rest of the tips in this video.

How to Kill bed bugs: Climbup™ Insect Interceptor

The Climbup Insect Interceptor is a new monitor for the use of detecting bed bugs. This is a new monitor. It's a passive monitor. You can place the monitors underneath one of the legs of a sofa or bed or other suspicious piece of furniture. This will not rid your home of bed bugs. This is a way of letting you know where the infestation is or isn't. It is a monitor, but it does not control them. Once the bugs fall into the trap, they can't get out. You will need to properly dispose of them, af...

How To: Make a large fancy hair bun

In this video, we learn how to make a large fancy hair bun. First, you want to have your hair brushed and straightened. You will need: brush, hair ties, bobby pins, rolled up sock, and hair spray. Start off bringing your hair up into a pony tail, then tie it with an elastic. Next, grab a hair roll and bring it under the base of the pony tail around to the font. Now, let your hair fall evenly, while pushing your head down. Grab you elastic, and wrap it around the base of the hair bun. Next, ta...

How To: Use cones when jewelry making

In this video, we learn how to use cones when jewelry making with Christina. First, take a half inch hard wire with a looped end and use a pair of pliers to open up the loop slightly. Next, take your strands of beads and place them onto the loop. After this, close the loop making sure it's secure and the beads won't fall off. Then, take the cone and insert the wire through the wide end and pull it through the narrow end. Using your fingers, bend the wire to a ninety degree angle, then trim of...

How To: Embroider with beads and sequins

In this video, we learn how to embroider with beads and sequins. First, push the needle through the bottom of the cloth into the top where the sequin is at. After this, continue to thread in beads and more sequins. Make sure you are pulling through on the bottom so you attach the beads to the thread and they don't fall off. When you are done with this, you will push the needle through the top of the cloth, then tie it at the bottom and cut off the excess thread. When done, you will have a bea...

How To: Sew & measure elastic

In this tutorial, we learn how to sew and measure elastic. First, place the elastic over your waist and think about what you are making. Decide if you want it to be comfortable or if you want it to be tighter if you are wearing it out during the day. Also take into account what type of fabric you are going to be using so you know how much elastic is needed. Fold the elastic and mark the inside and outside of the fold, now do the same thing with your fabric. Now you will know if you need to ea...

How To: Build your upper body with standard push-ups

In this tutorial, we learn how to build your upper body with standard push-ups. Start off on the ground with your hands down directly underneath your shoulders and your feet drawn back without the knees bending. Keep this position for several seconds if you are new to working out and then bend down if you feel you can do controlled push ups. Push up and down slowly, because this won't use momentum to lift you back up. Make sure your body doesn't touch the ground, this can hurt your hands if y...

How To: Bake salmon without overcooking it

In this tutorial, we learn how to bake salmon without overcooking it. First, lay your salmon down on a baking sheet and then sprinkle dry rosemary, olive oil, lemon juice, pepper, garlic, and sea salt. First, remove the pin bones from the fish if they are inside of it. To see if your fish has it, run your finger over the top of it and then use tweezers to pull the bones out. After this, you will place the baking sheet inside of the oven and cook the salmon until it just falls apart. Avoid coo...

How To: Hygienically pierce your own lip at home

In this tutorial, we learn how to hygienically pierce your lip at home. First, you will need a sharp needle that is cleaned with rubbing alcohol. Next, draw a line on your face where you want to pierce your lip. Next, grab your lip so it's taut, then place the needle into your lip. Go slower so you feel less pain while it is being inserted. When you get to the other side, insert the jewelry where the needle was, so it goes inside seamlessly. Once you get the jewelry to the other side, place t...

How To: Prepare your home for winter snow fall

In this video tutorial, viewers learn how to winterize their home. Users should begin by cleaning the gutters on the side of their house. Scoop out all the debris and seal it with caulk. Then change the batteries of the smoke detector and clean it. It must be replaced if it is over 10 years old. Prepare the lawn mower for the spring season by sharpening the blades, clean it and drain all the gas out. It is a good idea to trim off the shrubs and trees. This video will benefit those viewers who...

How To: Center your spins in figure skating

In this tutorial, we learn how to center your spins in figure skating. When you're spinning, you will find yourself traveling when you spin. To avoid doing this, think about where on the blade you are spinning. If you are in the right spot on your blade, you will stay in one spot. Also make sure you rock up and down while you are moving, not applying too much pressure on the shoe so you fall off center. Spin on the ball of your foot and don't push your heel in too much. Using these tips can h...

How To: Get rid of Japanese beetles

In this video tutorial, viewers learn how to get rid of Japanese beetles. This task is very easy, fast and simple to do. Begin by filling a bucket with some water and liquid soap. Then simply shake the leaves and catch the beetles in the bucket. Another way to is attach a funnel on top of the bucket's lid. Place a 4 wall trap on top of the funnel. This will allow the beetles to instantly fall through the funnel when they hit the wall. This video will benefit those viewers who have a backyard ...

How To: Do a boneless flip skateboard trick

In this tutorial, we learn how to do a boneless flip skateboard trick. When you do this, it should be in one smooth and fluid movement, so practice each part before you do it. You have to reach down, put your hand on the board and slide your foot off. You can pull the board straight up or scoop it out, depending on what you prefer. Once you lift the board up, you will place it right back on the ground and keep riding. You don't want to just grab the board and have it fall, you can flip the bo...

How To: Backside 180 ollie on a skateboard

In this tutorial, we learn how to backside 180 ollie on a skateboard. First, start on the skateboard and have your back foot on the back of the board. Pop the board at an angle, then slide your foot up and turn your body and shoulders. After this, the board will come off the ground, then you will land and roll away. You will roll out one of two ways, and you will need to get used to this before you start to practice. Make sure you do your trick into the grass so when you fall it doesn't hurt ...

How To: Flirt with girls

In this video, we learn how to flirt with girls. If you like a girl, make sure you take it easy with her and take your time. Take things slow and don't fall in love right away. Flirt with her and make her laugh to get her attention and make her want you. You can also stare at the girl for a few seconds, to let her know that you have her attention. Also, make sure you smile a lot and let them know they make you smile and make you laugh. Also, make sure you make small talk and get interested in...

How To: Make your lawn tractor faster in three easy steps

In this tutorial, we learn how to make your lawn tractor faster. First, add an exhaust to your lawn tractor with a one inch pipe out the back. Make sure it's secured so it doesn't fall down onto the ground while you're driving the tractor. Also, add on a 51" belt instead of a 52" belt to make the tractor run faster. The last thing you can do to make your tractor faster is to place a spring and wire around the throttle to start the machine faster. This could make your tractor go up to at least...

How To: Clean a Spyder Marker paintball gun

In this tutorial, we learn how to clean a Spyder marker paintball gun. Before you start, disconnect your air source and turn the gun off to a safe position. Now, remove the barrel and slide out the pin. Now, the marker should fall out on its own. Make sure not to lose any of the parts that come out with this. Pull out the string, bumper, and striker as well. Now, use paintball oil to clean all of the parts that you removed from your gun. Only use the paintball oil, because other oils contain ...

How To: Solve phong problems when working in MAXON Cinema 4D

This clip demonstrates a quick workaround for the phong problem on objects more complex than cubes or spheres. To wit: Bake the normals. With a normal map included in the outer texture of the object there should be no cracks visible until the pieces are falling apart. Whether you're new to Adobe's popular motion graphics and compositing software or a seasoned video professional just looking to better acquaint yourself with the program and its various features and filters, you're sure to be we...

How To: Fold a kirigami Christmas tree

In this tutorial, we learn how to fold a Christmas tree. First, start with a square paper and fold it in half, then open it and fold it corner to corner. Open the paper again, the turn it over and fold it side to side. Open it once more and fold again side to side. The paper will not automatically fall into the shaped creases and you will have four flaps. Take your finger inside and flatten all the flaps. You should have four flaps on each side and then you can cut the bottom to form a trunk ...

How To: Do a yoga crane pose for arm and core strength

In this video, Dina Prioste shows us how to do a yoga crane pose for arm and core strength. First, start off with your knees bent and your arms out in front of you. Now bend your elbows and place your back legs into your arms. Now, balance on your arms and push your legs into the air while still pushing them into the arms. You may want to practice this with a blanket in front of you just in case you fall forward. Remember as you try doing this to wedge your knees into the armpit as far as you...

How To: Make a trapeze spring snare to catch small game

Ryan teaches us how to make a trapeze spring snare to catch small game in this video. You will need: finishing line, a knife, paracord, and natural living wood. the trap will have two snares built into one mechanism. Start off by gathering all your wood and then place a stake down into the ground. Make a notch in your anchor to place a stick through it, then tie paracord down into a "y" shape tied down onto the stick. When you pull the string, there will be a lot of tension. Tie the center so...

How To: Do a backspin maneuver in figure skating

In this tutorial, Gina teaches us how to do a backspin in figure skating. This is when you are spinning on the opposite foot but in another direction. The most difficult thing is to find the right balance in your body. It takes a lot of practice to get used to this. You can use an exercise of doing backwards cross overs to get used to finding the spot that will be perfect for your body to balance. Start by doing an open position, the go into a rotating position. If you are in the right positi...

How To: Apply icy blue eye shades for a winter inspired look

In this tutorial, we learn how to apply ice blue eye shades for the winter. To start, apply concealer underneath your eyes and then apply foundation to the entire face. Next, use an angled brush to apply makeup to your brows and make them more full. Now apply powder underneath your eye to catch any powder that falls while you are applying eyeshadow. After this apply primer to your entire lid and then apply a yellow tone shadow to your entire eye. Now take a blue eyeshadow and brush it on the ...

How To: Play midfield in soccer

In this Sports video tutorial you will learn how to play midfield in soccer. Adrian Heath, Head Coach of Austin Aztex, explains the role of the midfield player in this video. Midfield player is the engine room of the team. He moves forward and feeds the ball to the strikers for attacking the opponent's goal and falls back in to his own half when defending. Two midfield players combine to pass the ball from the defending half to the attacking half past the opposing midfielders. There are many ...

How To: Correctly fill a rinse aid dispenser

If you've never used a dishwasher before, you're about to fall in love with a machine that makes washing dishes easy. One of the main features of owning a dishwasher is it's ability to rinse the dishes to make them nice, shiny, and clean. A rinse aid dispenser is used to store a cleaning product that can prevent streaks or marks from appearing on your dishware.