Fell Flat Search Results

How To: Install a violin bridge

In this video, we learn how to install a violin bridge with Mike. First, loosen the tension of the strings, then take out the bridge from the violin. After this, pull the strings around so they are running straight. Tighten them, but not too much. You want a pinky worth of height in between the strings and the base. Now grab the bridge. The flat side will face the tail of the violin and the other side will face the opposite. The bridge should be place directly in between notches on the base o...

How To: Take apart an iPod Nano 3rd generation for repair

In this tutorial, we learn how to take apart an iPod Nano 3rd generation for repair. First remove the back casing using a guitar pick. Next, use a flat tool to lift up the battery carefully and remove it from the casing. You will see three wires that lead to the launch board, which are soldered into place. Now, use the flat tool to remove the back of the battery casing from the device. Now, remove the logic board by removing the 6 small screws inside of it. Next you will remove the LCD by lif...

How To: Fine tune a piano

In this tutorial, we learn how to fine tune a piano. When you move the pin, the speaking length of the string should move as well. When you're done it should stay stable. You should have a meter hooked up to your piano so you can see which notes are flat and which are pitching correctly. Sometimes you will be able to fee movement in the piano and then change how you want it to play. You will be able to hear if the pitch it soft or flat as you continue to listen to the notes that are being pla...

How To: Do a Pilates glider

In this video, we learn how to do a Pilates glider. To start, lay down on a flat surface on your stomach, with your legs flat and touching, and your arms out in the air horizontally. Now, inhale deeply and when you exhale, bring your upper body into the air, using your core to lift, not your legs. Stay in this position for one inhale, then exhale and come back down into laying position. Keep a long line between your neck and head, don't lift the head too much. To make this harder, you can mov...

How To: Do leaf rubbings for a children's acitivity

In this Family video tutorial you will learn how to do leaf rubbings for a children's activity. For this you will need a flat surface. If the table top in slightly uneven, put a sheet of construction paper on it. The materials you will need are sheets of paper, crayons and leaves. You can also use fabric leaves if your area doesn’t have any leaves. Take a leaf; put it upside down on a flat surface so that the veins are on top. Put a sheet of paper over the leaf and hold it down with one hand....

How To: Wear black suede boots & flat ankle boots

This video lesson will show you how to wear black suede boots & flat ankle boots. The flat ankle boots have a wedge inside and they can be turned into a high leg boot. In this video they are going to turned into ankle boots. You should wear stockings that match the color of your suede boots. For example, for black suede, use black color stockings. Then you need to have matching dress with matching scarf and jacket. The video gives quite a few other tips on what to do with different suede boot...

How To: Do bicycle crunches with Brooke Burke

Bicycle crunches consist of lying flat on your back, your hand on the back of your head, knees bent to face the ceiling, feet flat on the floor. To perform the bicycle crunch bring one elbow up toward your opposite knee as you bring the knee toward your elbow. This will cause you to move part of your upper body and you should feel the workout in your abs. As you progressively get better at this move you can bring your legs straight up in to the air. 5 minutes of this 3 times a week should be ...

How To: Get Kesha inspired messy loose scrunched waves

Are you a fan of the hot new pop icon Kesha? This video will teach you how to create her loose scrunched waves look. This instructional video requires you to use both a flat iron and blow dryer. The first step is to put volume product into the hair before blow drying it completely dry. Next, part the hair off to the side, making sure to not use your natural part line. Third, section off the hair into manageable strips. Then, place the strip into the flat iron and bend the hair around the iron...

How To: Perform inner thigh extensions with an exercise ball

Diet Health shows viewers great exercises that will work well for the legs, thigh and specifically the inner thigh. These will require that you use an exercise ball. First, you will want to lay flat on the floor. Your back should be flat as well as your arms laying flat to your sides. Lift your legs so they are bent at the knee with the exercise ball being held in between your feet. You will want to squeeze your inner thighs to keep the ball in place. Keep your knees in the same place as you ...

How To: Do pelvic tilt exercises

Work out the pelvis with pelvic tilts. Learn about exercises for strength and flexibility in this training video. Take action: keep your back flat, this is a high repetition exercise, and keep feet flat on floor. Michelle, the instructor in this how-to video, is a personal trainer at a gym in NC and has been a personal trainer for several years. She is certified through ACE and is a certified aerobics instructor as well. Her Specialty is weight lifting and she enjoys training aspiring female ...

How To: Make a Toilet Paper Launcher

Shoot streams of toilet paper in midair with this ultimate TP machine, the Streamerator. Take a look at this instructional video and learn how to make a toilet paper launcher with a generic, electric yard blower. This gadget is extremely easy to make. First, you need a steel rod about the same length as the blower, the rod has to be bent at 90 degrees. Two ground clamps are used to mount the steel rod which will serve as a roll holder. A flat punched piece of metal is measured and screwed int...

How To: Make a Call of Duty Black Ops player card / emblem

Your Call of Duty Black Ops custom player card / emblem is the first thing that a potential opponent sees about you, and you should be proud of it. This video will give you some great tips that will help you make any emblem you choose to make look sharper, less flat, and overall just plain more badass. The example made in the video is a cool star, so if you wanted a star you're even luckier!

How To: Curl your hair perfectly with a flat iron

In this tutorial, we learn how to curl your hair perfectly with a flat iron. First, brush your hair out and then spray in some heat protector to all of it. From here, you will section your hair off into small sections and then heat up your iron. Now, clamp the iron to the root of the hair and then twist it 180 degrees. Slowly pull the iron down from the hair. The slower you pull the hair, the tighter the curl is going to be. When you release it, curl the hair with the finger and then move on....

How To: Curl your hair with perfect curls using a flat iron

In this tutorial, we learn how to curl your hair with perfect curls using a flat iron. First, pull your hair up so you are just left with the bottom area of the hair. Next, take a small section and place the straightener into the top of the piece. Wrap the hair around the iron and then pull the iron straight down to the root. Repeat this for all of the sections of your hair, until you have curled all of the different pieces. Take the top section down and then curl that. From here, you will be...

How To: Lay ceramic tile

In this tutorial, we learn how to lay down ceramic tile. Start off by laying down the mortar for the base. After this, scrape it around with the ridged laying tool. Then, lay the tile down flat and place a spacer in between the one that it is next to. Once you are finished with this one, continue the same process for the rest of them. Make sure you are laying the tile down totally flat and it is lined up with the other ones. There should be spacers in between all of the different tiles that a...

How To: Change a flat tubular tire

In this tutorial we learn how to change a flat tubular tire. First, grab your tools and remove the tire from the wheel. Do this by locating the stem and finding the spot across the other side from it. Once you have take this off entirely, you can move onto the next step. Once finished, replace the new tire back onto the wheel. Start with the same area and make sure to push the stem through the hole. Use your body weight to stretch the tire around. To finish this process, you will simply need ...

How To: Get great looking curls with a flat iron

In this video, we learn how to get great looking curls with a flat iron. First, heat up your straightener and clip up your hair so you curl the underneath first. Now, you will take sections of your hair depending on how big you want the curls. Grab the iron and place it in your hair at the top near the root. After this, twist the straightener and then pull down slowly until you reach the bottom of the hair. Wrap your finger around your hair to make it more curly, then continue to curl until y...

How To: Lose belly fat by avoiding junk food

In this tutorial, we learn how to lose belly fat by avoiding junk food. If you eat too many bad fats, they will store inside of your body and cause several health problems for you. The more you eat, the more your body will store and it will be harder for you to burn off, causing you to become overweight. To achieve a flat stomach, you will just need to make sure you are eating healthy foods. Make sure you are not eating foods with a lot of high sugar content or quick burning carbs. Once you s...

How To: Curl hair using a straightener or flat iron

In this video, we learn how to curl hair using a straightener or flat iron. First, you will want to heat up your straightener in its highest setting, then spray heat protector in the hair. After this, take small sections of the hair, then place the straightener 3" down from the top. Twist the iron and then pull down straight through the hair, stopping just short of the bottom. When finished, you will have a nice and loose curl. Continue to do this throughout the entire head of hair, then spra...

How To: Play "That's Entertainment" by The Jam on guitar

In this video, we learn how to play "That's Entertainment" by The Jam on guitar. Start with a B flat for the intro, then go down to a G minor, followed by a C minor, and A flat. An easier way to play this is with a capo on the third fret. With this, replace the chords with a G, E minor 7, A7, and F major 7. As you play this, you will feel the melody that will be the same through the rest of the song. The sounds will go up and sown as you play, just add in the words and feel the song to get th...

How To: Build a sturdy flatbed truck out of Legos

Looking for a new Lego project? Look no further! In this two-part series you'll learn how to build a great flat bed truck out of lego bricks! Each video starts showing you each brick that you'll need, the first video being the truck cab, and the second being the actual flat bed, and then goes into a great, step-by-step tutorial, showing you where each piece goes and before you know it you'll have a flatbed truck!

How To: Draw a large room with sectioned off spaces

When vanishing point perspective was first discovered in the early Renaissance, artists were astounded by how the draftsman tool was able to transform a flat, 2D space (that until then always looked like a flat, 2D space without perspective) into a believable 3D image. We've been using vanishing point perspective ever since, and architects would die without it.

How To: Create a half up, half down back to school pompadour

Pompadours sound kind of, well, pompous, and look rather prosh. With a literal "I'm above you" upward beehive bump that towers over your own head and others, a pompadour is a hairstyle with 'tude, and while before people that it was too ostentatious to wear, starlets like Jennifer Lopez and Rachel McAdams have worn the style on the red carpet to much acclaim (and copycats).

How To: Make a floating flower, Swarovski crystal toe ring

Kameron Kay teaches us how to make a floating flower crystal toe ring in this tutorial. You will need: stretch cord, large crimp bead, flat nosed pliers, flat backed crystal flower, glue, and small scissors to make this. First, cut out your chord to the exact size that you need. After this, use glue to attack the ring into the middle of the string. Place a crimp bead on the bottom to help the bead stay in place, then glue these together as well. Next, tie this together and attach an end to th...

How To: Use quick releases for your front and rear wheels

Quick releases are one of the most convenient features that you can have on your bike, allowing you to change out your wheels quickly and easily without any additional tools. This video will show you how to use the quick releases on your bike to replace a flat or otherwise damaged tire on the fly, helping you get back to riding without getting your hands dirty.

How To: Create an elegant band look for curly hair

In this video, we learn how to create an elegant band look for curly hair with Liz Muller. To start, you will take a comb and brush the front of your hair to flatten it out and make it straight. Push your hair to the back of your head, then take pins to pin the hair back on the head. Make sure it's tight so the hair doesn't become loose. Continue to pin the hair on the bottom, then bring your hair to the front. Do this on the other side of your head, again brushing the bangs back to make them...

How To: Apply decals to RV cars

In this tutorial, we learn how to apply decals to RV cars. First, peel your decal from the paper they come on and then place it onto the RV car where it is smooth and there are no ripples on the vehicle. Make sure the entire decal can fit onto the spot where you want to place it. If you put it onto a bump, it won't seal and there will be blur with the lines. Once you apply the decal, push on without letting any air through, dragging the paper along the artwork. To make it more flat, take a cr...

How To: Perform a flat four string briad on your own hair

In this video, we learn how to perform a flat four string braid on your hair! First, you want to start off with either wet or dry straight hair that has just been brushed out. Next, you will grab the top three piece of hair on your head and perform a regular braid by placing the right section under the middle, then the left under the middle, and so on. Keep doing this for about 4 braids, then start adding in hair on the right and left hand side each time you get to them. Repeat this until you...