Floor Breaking Method Search Results

How To: Deepen your yoga pigeon pose

In this tutorial, Dina Prioste shows us how to do a stretchy pigeon yoga pose. Make sure you properly warm up your body before attempting to do this pose. First, start off in a pigeon pose with your front foot as far forward as you can place it. Keep your back toes tucked under and lean forward with your elbows and forearms to the front on the ground. Inhale while sending the back heel back. Do this three times, and exhale while you go back in. Do this on both sides, then place the foot on th...

How To: Do variations of the squat and crow yoga poses

In this tutorial, Dina Priost shows us how to do variations of the squat. Begin in a standard squatting position, and deep breathe 3 times. Now, place your hands on the ground and crouch down, placing one leg off the floor one after the other. The knees should be placing the arms around where your elbows are. The next move will start with a squat, and place the right arm on the ground with the left raised in the air. Do this with both arms while deep breathing. Place arms on the floor again w...

How To: Do yoga hand and wrist stretches

In this video, we learn how to do screaming hand stretches with Dina Prioste. This will help loosen up your hands and wrists so you can achieve better yoga poses. First, come into a tabletop position with your hands under your shoulders. Now, bring your fingers to point backwards with your palms flat on the floor. Lean back until you feel a stretch in your hands and wrists. For the second stretch, bring the tops of the hands down on the floor with the hands pointing down, then stretch back. L...

How To: Cut Trafficmaster Allure flooring with your hands

One of the distinguishing aspects of Trafficmaster Allure vinyl flooring is that it requires very little effort to cut the pieces to whatever length you need. All you do is score a line across the piece, then fold it in half! It snaps cleanly into two new pieces. This quick video features a man remodeling his office cutting a piece himself in only 26 seconds, using only a ruler and a knife to score the wood before he folds it.

How To: Get a ripped chest at home

In order to get a ripped lower and upper chest, without going to a gym, you will need something to prop your knees up. You can use your bed or a chair. To recreate your incline and decline chest press exercises, a modified pushup substitutes for it. Watch your posture and your spine alignment, when you are doing them.

How To: Layer techniques to create a belly dance routine

Get started on the dance floor creating belly dancing routines with the help of layering. When layering various techniques and moves in belly dancing, perfect each individual movement before combining them together. Get closer to master a belly dancing routine by layering movements with this instructional video conducted by an expert: Yasmeen began dancing at the young age of 3 and studied ballet, flamenco, folkloric, hip-hop and modern dance styles, as well as tribal fusion belly dance and O...

How To: Get bigger pecs while doing dish rag housework

In this video tutorial, viewers learn how to build bigger breasts or pecs while doing a dish rag house cleaning. The materials required for this workout are 2 dust rags, a dirty floor and a pillow. Begin by resting your knees on the pillow and go into a semi push-up position while holding the rags in each hand. Now slide your arms horizontally out as slow as possible, until your chest touches the floor. Then return to the starting position and repeat this movement several times for a set. Thi...

How To: Tone arms and legs with 10 minute 300 workout

In this video tutorial, viewers learn how to tone their arms and legs with a 10 minute, 30 rep workout. This entire workout routine will target the arms, legs, abs/core, aerobic and balance. There are 6 exercises in this workout. The exercises are: plank rows (with weights), barbell curls, dips (just body weight), sumo squat jumps (with or without weights), floor hams with an exercise ball and floor calf raises (with weights). For each exercise, do 50 reps. It is recommended that beginners sh...

How To: Finish a basement layout and planning

In this video tutorial, viewers learn how to finish a basement by laying out and planning. Planning the lay-out and design of the basement is an important part of finishing or remodeling a basement. Learn how to get new ideas as you design and lay-out your basement floor plan. Viewers will learn how to finish the basement space with expert tips and advice on home improvement. Make sure the basement is empty. Make measurements and mark them on the wall or floor. For a bathroom, there should be...

How To: Get six pack abs through bench crunches

Six pack abs are possible, if you put in the time and work. This instructional video demonstrates simple exercises you can do to sculpt your abs. Rememeber, abs don't just happen over night, but stick to it. Llittle can compare with the satisfaction of looking down at your own washboard stomach.

How To: Use the 3rd row seats on a 2010 Toyota 4Runner

This video produced by Toyota USA shows an owner of a 2010 Toyota 4Runner how to use the 3rd row seats in this vehicle. First we learn that only certain 2010 Toyota 4Runners have the 3rd row seats that fold into the floor. Next we are shown how to raise the seats, to do so you simply pull down on the handle at the top of the seat and then raise the seat back into position. Next pull the seat base forward. Finally go to the rear of the vehicle and rotate the headrests into the upright position...

How To: Perform the "Skeeter Rabbit"

Originated by James Higgins (AKA "The Original Skeeter Rabbit") in the 70s, the skeeter rabbit is a shuffle step you can use in your hip hop dancing. This move employs your skills on locking to contrast with the fast moves you're doing on the dance floor. The skeeter rabbit calls for extensive use of your legs, hopping swinging and freezing for a frantic move that's sure to impress on the dance floor. This video tutorial will teach how to do the skeeter rabbit dance move.

How To: Prepare for installing laminate flooring

This video tutorial shows you the proper way to prepare for the installation of laminate flooring. One thing you need to do is maintain a temperature of a minimum of 65 degrees. You can install it practically anywhere, as long as there is no moisture or dampness. Concrete, ceramic, wood , and vinyl are all find for installation but the surface needs to be dry, flat and smooth. This video is a simple guide to give you some precautions before you begin your installation.

How To: Organize your garage to save space

According to a U.S. survey, the crud in our garages is taking up most available floor space. Hence the average North American chucks up to $6500 worth of mostly useless stuff on the floor of the garage, while the $20,000 vehicle sits outside in the cold, rusting. It's time to get our cars back into garages. We spent more than $688 million dollars last year on garage organization and it barely made a dent. If you don't believe me, walk down your street and count the number of houses with cars ...

How To: Easily Replace a Damaged Laminate Floor Plank

Laminate floor planks look beautiful and add elegance to a home. However, if a plank gets damaged, it detracts from the beauty of the flooring. Do you call in a professional and pay tons of money to replace the plank? Thankfully, no. There actually is an easy way to replace a damaged laminate plank if you are ready to spend some time and have a little bit of patience.

How To: Clown walk

Have you run out of moves on the dance floor? Impress your friends and yourself by breaking out some old school moves with a crip walk clown walk move. Follow the steps in this video to learn how to clown walk.

Minecraft Flooring Laid Out: 5 Inset Floor Styles for Your Builds

Last week, I did a short tutorial on three main types of flooring for your Minecraft builds. This week, I will be focusing on just one of those—inset floors. This was the first of the three types I briefly covered, and the example I used was an inset fireplace. Here, I will be going over 5 types of inset floors. I did not light the fireplaces, because the building I was using kept burning down.

How To: Install a T-Mold Transition Between Laminate & Ceramic Tile

Installing a T Mold Transition Between Laminate and Ceramic Tile There are several different types of laminate transitions that you may need when installing laminate flooring. Each one is used specifically for where the laminate flooring ends, such as where the laminate stops at ceramic tile. Other transitions are used where the laminate ends at carpet, vinyl flooring, a threshold or a step down such as a sunken living room or stairs.

How To: Break into Almost Any Gun Safe with Straws, Paper Clips, Coat Hangers, and Even Children!

At the recent DefCon conference in Las Vegas, researchers opened many of the top commercially available gun safes with simple tools like a straw or a paper clip, and in one case, just by shaking it a bit. The investigation began after the researchers, Toby Bluzmanis, Marc Tobias and Matt Fiddler, learned that certain Stack-On safes, issued to some law enforcement officials to secure their firearms at home, could be opened simply by jiggling the doorknob.

How To: Design a safe kitchen

Home accidents. It's up to you to protect your family… your children… from accidents in the home. And there's one place that seems to get the most attention when dealing with safety concerns… The kitchen is one of the busiest, most accident-prone rooms in the house. Design a kitchen that will keep your family and guests safe.

How To: Replace and install an exterior door with Lowe's

To replace a door, refer to Lowe's do-it-yourself for a step by step guide. Replacement is not very difficult. To replace just the door, tools and material required are: a new door, hammer, screw driver, tape measure, pencil, combination square, saw horses, clamps, chisel, a door lock installation kit, a drill with bits, circular saw, level, work gloves, dust mask, safety glasses, plane, shims, cardboard, and a utility knife. Before removing the old door, take a few measurements like the widt...