Fundamental Machines Search Results

How To: Build a Newman cool motor

In this three-part video tutorial, learn how to build a "Newman Motor". From the website of Joseph Newman, this motor is an "electromagnetic motor that runs cool (unlike all conventional motors) and harnesses the

How To: Use a chop saw the right way

In this video tutorial, viewers will learn how to use a chop saw. A chop saw is a power tool which is typically used to cut hard materials. This saw can cut pieces at different angles. When cutting any material, make sure it is pushed tight against the fence. Hold the material tight in this position and make sure it is correctly leveled. When using this machine, be sure to wear safety glasses or a face guard. Avoid cutting small pieces of material and go at a slow pace. This video tutorial wi...

How To: Make playdough and salty clay for kids

Anne, The Making Things Girl, demonstrates how to make play dough. Play dough is almost like clay in that you can bake it so it hardens. Then you can decorate it with things like paint, glitter and rhinestones. To make play dough you will need 2 parts flour, 1 part household salt and 1 part water with 2 tablespoons of olive oil. Mix the ingredients in a mixing machine for one minute. Next, work and knead the dough in a bowl and then on the counter. Knead the dough for a while because it makes...

How To: Perform advanced stretching techniques

The video first opens up with a muscular man standing in a well lit weight room. He begins with a quick description explaining how he will be performing the stretches and then begins to do so. He swings his leg back behind him and bends it and pulls it up to his behind, he continues to do so for some time. Next he brings the same leg forward and stretches it over his other knee. After that, he bends over and exhales and touches his toes. He then gets a foam pillow and stretches his legs out c...

How To: Cut a crown molding and coving scarf joint

In this video tutorial, viewers learn how to cut a scarf joint in crown molding and coving. Scarf joint is simply two flat planes meeting on an angle relative to the axis of the stock being joined. Users will need a magic miter. The magic miter is a miter box for cutting miter joints at any angle in crown molding, baseboard, chair rails and more. Adjust the machine to a 45 degree angle and lock it. Put in the mold and cut it. Repeat the same step for the other side. This video will benefit th...

How To: Do a fat burning cable workout

In this video tutorial, viewers learn how to burn fat with a cable workout. These exercises will require a cable machine. There are four exercises in this workout. These four exercises are: cable wood chop, reverse wood chop, one arm cable row and exercise ball cable crunches. When performing these exercises, do not use a heavy weight. These exercises mainly target the abdominal and core muscles. They also target biceps, obliques and back muscles. This video tutorial will benefit those viewer...

How To: Recycle & reconstruct your denim jeans

Learn how to recycle and reconstruct your denim jeans: Craft side Look, Learn and Create with Stefanie Girard and Jean Therapy with Scathe G. Allison demonstrate how to recycle and reconstruct your denim jeans. You can make a bag out of your jeans by using the leg as the strap. Customize jeans by adding patches to the legs and ruffles to the bottom. All the projects use simple sewing machines and stitches and don't require extra tools. A skirt can also be made by sewing together 14 pairs of d...

How To: Make a basic single holiday bow

There's no better time than the holidays to whip up a batch of beautiful decorative bows. This instructional video teaches you how to tie your own bows for embellishing any holiday themed item. Once you've mastered this technique feel free to experiment with other sizes and styles. These are the bows that we use to attach to wreaths, garlands, centerpieces, swags, potted plants, and a variety of other floral arrangements. Learning how to make your own professional crafter's quality bow like t...

How To: Jailbreak an iPhone or iPod Touch firmware 3.0

George3694 will show you how to jailbreak an iPhone or iPod touch firmware 3.0. This will work on the iPod touch first and second generation, the iPhone original and 3GS. Download Red snow software from the link provided. Click on browse download firmware and put it on your desktop. Next upload the firmware to your device. Install both features, make sure your device is plugged in and turned off. Follow the instructions and put device in DF mode. Just wait as the software loads to your machine.

How To: Skin components in Flash CS3

This video illustrates to create the skin components in Flash CS3. The procedure to create the skin components are, If you set an FLA to export for Action Script 1, or Action Script 2, the components panel will automatically refresh with the components that you are familiar with from Flash 8 Professional. If you change the file to export for ActionScript 3.0, you will see the new components. Flash will always show you all the components that you are able to use given your export target. In Fl...

How To: Deep clean your vinyl LP records with steam

This video shows a method of cleaning LP records using steam. He uses a Perfection steamer and a record cleaning machine with vacuums, along with a set of brushes, Disc Doctor cleaner, and laboratory grade water. He uses distilled water in the steamer. He turns the turntable on, applies the cleaner, spreads it with a brush, and applies the steam while the record turns. After the steaming is done, he continues rubbing it with the brush, and turns on a vacuum. Next he runs the steamer of the re...

How To: Use the Yudu personal screen printer

CreativeXpress shares a video regarding the usage of the Yudu personal screen printer. Put the plastic foil over the design you want on your t-shirt and turn on the light on the printer. This will cause the design from the page to be transfered onto the foil. Then you simply place the shirt onto the foil and place a good amount of ink on top of the foil. Use the squeegee to spread the ink over the design and onto the shirt. Let it dry for a bit, then iron the shirt using a cloth or piece of p...

How To: Use the Top Lighting Cotton Candy Maker

There are several steps required to successfully use a cotton candy maker. Start by preheating the cotton candy maker for five minutes. Turn the cotton candy maker off and pour the sugar into the machine. Turn it back on and as it begins to spin, take a stick and move it around the spinning cylinder and the cotton candy will begin to adhere to the stick. As you move it around the cylinder, stop every two or three times around and roll up what you have gathered by moving the stick.

How To: Make a Christmas invite card using Cricut Very Merry

Mary, from Cardstv, shows you how to make a Christmas Card, using the fantastic Cricut machine by Provo Craft. She shows you how to use the "Very Merry Tags" Cricut cartridge to create a cute Christmas card with a Gingerbread man on the front of the card. Mary also shows you short cuts for your card embellishments. Giving you a variety of ways to create different cards makes this video a must to see. Enjoy make Christmas cards with Mary, just has she has enjoyed showing you this video.

How To: Install VMware and Windows XP in Ubuntu

Software expert David Steinlage guides the viewer through the step-by-step process of installing VMware and Windows XP on a computer driven by Ubuntu Linux. The first step is to get a serial number, which can be obtained free by visiting the site www.vmware.com and filling out the registration form. The VMware installer application Automatix is then opened and upon clicking the desired options, the installation of VMware starts automatically. At the end of installation, the user is prompted t...

How To: Make a get well pedestal card using Cricut Paper Doll

Cardcrazy09 presents a video on how to easily make a get-well pedestal card that's perfect for cheering up an ailing friend or relative. She guides us through the process step by step, detailing the proper measurements and techniques she used to make the perfect card. In order to make the card exactly like she has, you'll need a Cricut, a machine that is used for making stylish cards. By following the instructions in the video, you can make a beautiful card yourself without having to go out a...

How To: Tune up a riding lawnmower with Lowe's

Lowe's knows that riding lawnmowers are a big investment for your home and garden. This video shows the proper tools, and safety equipment needed to perform the maintenance needed. Lowe's explains how to replace the air filter on the mower, replacing and testing the spark plug, and how to lubricate the moving parts of the machine itself. The narrator also reminds viewers that when performing maintenance, to do so in a well-ventilated area. Following the steps in this video will make sure your...

How To: Sharpen your machete in the bush

This video explains the Machete field sharpening. This sharpening method is very easy for sharpening the knives and blades. The man in the video is explaining a sharpening method using a new machine which uses microwave for sharpening thick and hard knives. By using a dynogram and adjusting the microwave the knife can be sharpened. The process of sharpening is by just touching the dynogram through the flattened edge of the knife. This is a very easy process for sharpening the knife. He is als...

How To: Make holiday thank you cards with Stampin' Up!

The video is very informative about the using of a Stampin' Up. The blogger explains the different parts of the system and how to use them. She first shows the finished product, in this case a label or gift tag. She then explains the process of how to die cut the various parts and how to use the dies and machine to cut out the shapes. She then explains how to put the Tags together. She then shows how to finish the product. All through the process the video also has pop ups with a brief write ...

How To: Use an embossing folder with Stampin' Up!

This video is about using an embossing folder. The video begins off by showing how to create a perfect oval for the main emblem in the picture. First you take your whisper white card stalk and attach it to a piece of cardboard. after this process you run it the embossing machine to make the adhesive attaches correctly. The video contains video and audio instructions as well as multiple techniques to complete the task at hand. this video is very informative and help you indefinitely to complet...

How To: Clear cookies on Internet Explorer 6 and 7

Deleting cookies in your Internet browser allows you the freedom to surf privately. Cookies are little chips that store your information for different websites. For example, when you visit your e-mail, a cookie is attached to your browser that remembers your sign in information so you don't have to reenter it every time you navigate away from that page and back. Deleting cookies is a good idea if you are giving or selling your computer to someone else, or if you are on a shared machine. This ...

How To: Make a baby doll tube top dress

In this two-part tutorial, learn how to make a simple baby doll tube top dress! For this project you will need a meter of fabric (thin & loose), scissors, elastic, and of course... a sewing machine! This dress is perfect for going to throw on before headed to the beach or for those warm, sunny summer days!

How To: Airbrush eyeshadow or eye shading

Learn how to do eye shading using an airbrush machine! This skill is for the more advanced airbrushers. Beginners, be sure to check out Koren's other videos on airbrushing basics before you start this process. Those looking to try your hand at this, practice makes perfect!