Gun Vise Search Results

How To: Bend acrylics (like Plexiglas) with a hot air gun

Have you ever wanted to bend a small piece of acrylic? Well now you can with the help of a traditional hot air gun and this informative video. Make sure to wear safety glasses and gloves before trying this project. Clamp the acrylic to a work table, and proceed to turn the gun on and heat up the piece of acrylic, using a steady back-and-forth sweeping motion. As it heats up, you can use your fingers to gently bend the acrylic upward. Leave it at 90 degrees to cool down for a couple minutes, a...

How To: Fake shooting a person with a gun for film

Adam from Chemical Reaction wants to show you a little movie magic. This video tutorial will show you how to fake shooting a person with a gun for your homemade film. If you really want to make it look real, get the most real prop gun you can get, but don't use a real handgun. Fake blood is a good thing to get from a Halloween store. Acting skill is the most needed part here... because you can't look like you're being shot unless you can act properly.

How To: Use a hot glue gun

This is an instructional video featuring Doug Prime, founder of the Future Engineers Center at the University of Massachusetts Lowell. Learn the basics of using this craft tool. A glue gun is a great tool to have in a hobby or arts and crafts workshop.

How To: Play Beirut's "Elephant Gun" on ukulele

This video tutorial demonstrates the ukulele strum to Beirut's "Elephant Gun." The strumming pattern is as follows: Up, Up, Down, Down, Up, Up, Down, Up, Down. When you strum, use your finger as opposed to your thumbnail and pluck just the C and G strings (or in this case C# and G#). And that's it. For a complete video walkthrough, watch this helpful ukulele lesson.

How To: Play Guns N' Roses' "Sweet Child o' Mine" on guitar

Learning to play your favorite songs will, down the road, help you to make the sort of music you want to make. In this free video guitar lesson, you'll learn to play Guns N' Roses' "Sweet Child of Mine" on acoustic guitar. While this video assumes some knowledge on the part of its audience, beginning guitarists will find much to take away. Get started playing Guns N' Roses' "Sweet Child o' Mine" on your acoustic guitar with this video tutorial.

How To: Make a Gatling gun arm costume

Backyard FX is back just in time for Halloween with this video tutorial. This how-to video shows you how to replace your an arm with a motorized gatling gun! Make a cool movie or the best Halloween costume in town! All for less then $35 dollars. You will need six cardboard shipping tubes, a sheet of scrap foamcore, a cordless screwdriver, a film canister cap, an L-bracket, plastic tubes, a plastic bucket, a roll of friction tape, a 1" by 3" scrap of wood, a scrap of wooden dowel, and a skateb...

How To: Play "Knocking On Heavens Door" on guitar

Want to learn how to play Guns n Roses on the guitar? With this tutorial you can learn how to play "Knocking on Heaven's Door" by on the acoustic guitar. This version is a simplified version of the song and is not exactly how Guns n Roses plays it. This lesson is geared towards intermediate guitarists because it assumes prior knowledge of guitar playing. Watch this how to video and you will be able to sing and play the guitar along to "Knocking on Heaven's Door" by Guns n Roses.

How To: Make a miniature electric stove

Learn To Hack a Glue Gun and turn it into a Small Electric Stove to heat up your food. Its cheap to make and very helpful for when you don't have anything to cook you food with. Find out how by watching this video. All you need is a hot glue gun and some paper clips. Watch this video cooking tutorial and learn how to build a mini electric stove.

How To: Shut off your alarm clock with a light phaser

We'll base the project around a digital clock radio and a light gun for gaming; huge selections of both of these are available inexpensively second-hand, with many beautiful and well-designed examples. To enable our FPSI (First Person Shooter Interface), we'll outfit the gun with five tilt sensors, arranged at different angles on a small circuit board. A cable tethers the gun to the clock and carries your tilt and trigger signals to the clock's time and alarm control button contacts.

How To: Build a paper blowgun

This video tutorial will show you how to build a paper gun that can shoot. The idea behind this is to build a paper gun that can shoot paper pieces and other items, with power from your mouth. This video should help you in the making of your paper gun, which is more like a blowgun.

How To: Create gun sounds in FL Studio 7

This three part tutorial teaches you the basics of using FL Studio 7 with the free version you can download. First you will learn the basics, then part two will explain how to add in some effects to make your song more... lively, and part three covers how to make Automation Clip patterns with volumes and pitches.

How To: Replace a spoke behind the freewheel

Ever had a spoke break on your bike wheel? Don't throw the wheel away! Repairing a spoke only takes a few tools and some patience. You will need, at a minimum: a freewheel tool (used to remove the part of the wheel that engages the bike chain), a wrench, and a screwdriver. First, remove the tire and inner tube from the wheel. Next, remove any parts of the broken spoke that are accessible from the underside of the wheel rim. If the spoke is attached to the side of the wheel where the freewheel...

News: 4 Touched-by-the-Lord Potato Gun Video Tutorials

All of these four videos are excellent. You will notice that while all the videos and articles have slightly different design dimensions, they are fundamentally very similar. I urge you to view and read everything I am serving up. Then, my final words of advice are simply....choose between a barbeque switch and a taser gun. (Hint: there is a right choice, and there is a wrong choice.)

How To: Fix your Xbox 360 using a heat gun

Some repairs on an Xbox can be repaired with a heat gun. Turn your Xbox off first. Take it apart. Remove all of the bolts and screws. Set them aside. You will need to remember where everything goes to reassemble it. Remove all of the heat sinks. Clean off all of the paste. You will only be heating the GPU. Do not use it on the CPU. You'll need Arctic clean and a cotton swab to remove all of the paste. When it is clean, turn on your heat gun. Set it for 1000 degrees. You can test it by seeing ...

How To: Clean a Tippmann 98 Custom paintball gun

This video shows how to clean a Tippmann 98 Custom paintball gun. Materials needed are Pliers, gun lubricant, paper towels, Tippmann 98 Custom and Appropriate sized Allen Wrenches.Step 1. Unscrew barrel, take off hopper connector and tae off bolt cap.Step 2. Next use the Allen wrench to take off Co2 connector and handle grip.Step 3. Then take out the 6 screws that hold the 2 sides of the gun together.Step 4. Take out the front and back bolt.Step 5. Spray lubricant on the places and on both O-...

How To: Make a trigger-operated paper gun

This is an instructive guide to making a trigger operated paper gun. You will need an A4 sheet of paper. Start by rolling the sheet of paper horizontally (breadthways) and as tightly as possible, . Once the roll is completed, attach 3 lengths of sticky tape at each end and the middle, so it doesn't unravel. Then proceed to wrap another sheet of A4 paper around your existing roll, making sure that is as tight as can be so it is strong and sturdy. Again, attach sticky tape at each end and the m...

How To: Find the Vertibird crash site and Tesla-Beaton Prototype in Fallout: New Vegas

Back in Fallout 3, when they released the Broken Steel DLC, once you completed the main mission and finished the training simulation, you were allowed to take some pickings from the weapons and armor vault, one of which was the Tesla Canon, a sniper-rifle meets awesomesauce, high damage gun! Well, Obsidian did one better, and you don't even need to get DLC! This is the Tesla-Beaton Prototype, and you can find it at a crashed Vertibird site there in Fallout New Vegas in the south Mojave Desert...

How To: Play "21 Guns" by Green Day on acoustic guitar

In this video, we learn how to play "21 Guns" by Green Day on acoustic guitar. The chords of the verse are D minor, B flat major, F, and C. Once you have all of these chords, you will be able to start out playing the first verse and have the melody for the song. Move the chords down and up as you play to create a more in depth sound as you are playing. As you go through all of the different verses and chorus, you can add in your own variations to make a more unique song, then sing the normal ...