Head Stuck Search Results

How To: Solder wires when circuit bending

In this video, we learn how to solder bend points on wires. Before you apply the wire, you will want to solder the end point lightly, then take your wire and strip it slightly on the end. Then, add solder to the actual wire, now it will stick easily to your next bend point. When you do this, you can get a lot of wires next to each other without shorting them out. This is the easiest way to do it, just make sure you coat the wire so it sticks on easier. Be careful while doing this and use tool...

How To: Pick a padlock and understand how it works

When picking a padlock, the only part you need to worry about is the part where the key goes into the lock. The locking mechanism has pins attached to springs. The key pins are on the bottom and the driver pins are on the top. The key turns when the pins of different heights are separated, flush and aligned. Stick a tension wrench into the keyway and put pressure on it. Take a pick to push the rest of the pins up until they are flush with the shear line. Stick the tension wrench into the bott...

How To: Make a fishing spear for use in the wild

This video shows you how to make a fishing spear for catching fish or small wildlife in survival situation.To start, you need a sapling about 5 feet long and a knife. Make a raw sharpening of the stick. Then split the log at the tip for a length of 6-8 inches. To split, put the knife on the middle of the sapling, near the tip, and press hard against it. Once it is split, find a twig with the width of a pencil and push it inside the split, making the two halves of the stick form a gap between ...

How To: Make a classic sweet martini cocktail

This video shows you how to make a classic sweet martini cocktail that you can use for an entertainment surprise. The first public recipe was published in 1888. A dry martini has very little vermouth. A sweet martini has a little more vermouth. A perfect martini is a mixture of dry and sweet vermouth. To make the sweet martini cocktail we use a cocktail glass not a martini glass. Get the glass cold by putting ice and water into the glass. Get the shaker tin and put ice, 1 1/2 ounce of good gi...

How To: Waterproof your thumbdrive

Systm is the Do-It-Yourself show designed for the common geek who wants to quickly and easily learn how to dive into the latest and hottest tech projects. They will help you avoid pitfalls and get your project up and running fast. In this DIY episode, see how to waterproof your thumbdrive.

How To: Make a matchstick stand up on its head

Is it magic or is it an illusion? See for yourself when you watch this video tutorial on how to make a matchstick stand up on its head. There's an easy solution to this magic trick, easier than you think. You don't need to be a magician to perform this match standing on its head trick. Anyone can do it!

How To: Experiment with temperature using glow sticks

In this video from Dr. Carlson, users are shown how to witness the effects of the relationship between temperature and matter firsthand, using light-sticks. For the experiment, users need 3 beakers (or vessels of the sort,) and 3 light-sticks of the same color, shape, and light. To test the range, each beaker must correspond to one of the following states: room temperature, ice-water, or boiling water. Deposit a stick in each of them and observe for two minutes. Thus, one will see how the ato...

How To: Make popsicle stick fences

If you've got a tiny farm, you're going to need some tiny fences. Don't shell out your whole allowance for a fancy store bought fence set. Instead make your own fences out of popsicle sticks. This video tutorial demonstrates how to create stalls and stables so your miniature farm animals won't escape.

How To: Make deer pastrami snack sticks

Here is a video on making Pastrami flavored snack sticks. Part 1 is mostly the first day's work (preparation) with a little into the second day's set-up and stuffing. Part 2 is the balance of the production (stuffing and cooking with the recipe at the end). Alternate methods of cooking are to cook 1 hour and dehydrate until ready. No details are given on packaging.

How To: Shave your head and avoid cuts

This video demonstrates the proper technique to shave your head without getting cuts. First the presenter starts by shaving his head a pair of clippers. After the hair is trimmed he fills the sink with water to clean the razor off. The presenter suggests you take a shower before shaving your head to open the pores and loosen the hair. Then you apply the shaving cream to your head and massage it into the scalp. The presenter begins shaving the sides of his head, washing the razor after ever on...

How To: Give medication to a rabbit

Just like the rest of us, rabbits will take medicine more easily if it tastes good. But if you’re stuck with the old-fashioned, bad-tasting kind, here’s how to make the medicine go down. Watch this video to learn how to give medication to a rabbit.

How To: Model a 3D human head using 3D Studio MAX

An image of a human head can consist of a single penstroke or a thousand polygons. The head model that you will be learning to create in this three-video series leans very much towards the latter. The videos will teach you how to create a 3D model of the human head using 3D Studio MAX from a photo. It assumes some knowledge of 3DS MAX, but not too much, so don't be scared! Watch this baby and start modeling!

How To: Create a frilled layers out of gumpaste for cakes

This video is showing how to create frilled layers on a cake. First you need one mini cake, rolling pin, one knife, one cocktail stick, rolling board, icing sugar, glue or water, and gumpaste to do this. First you have to roll out the gumpaste to very thin layer. Next cut it out round with the frill cutter. Next take a cocktail stick and then create wavy effect to the gumpaste. Sprinkle some icing sugar on the board to use it fast. Next cut the gumpaste. Next take the mini cake and apply some...

How To: Power up your RV shower head

Professor of RVing Jim Twamley demonstrates how to install a new revolutionary shower head, the Oxygenics Body Spa. Follow the instructions outlined in this video tutorial to learn how to install the new shower head as well as how to remove the old shower head. Start showering in luxury with the Oxygenics Body spa shower head.

How To: Make a realistic 3D model of a head in 3ds Max

If you want to create really good 3D models on your computer, you need to be able to use more than just 3DS MAX or whatever other modeling program you have. It takes a whole family of specialized programs to handle the diverse tasks involved in creating really good models. This video will teach you how to create a male human head model using a combination of Faceworx, Mudbox, 3DS MAX with plugins, and Sony Vegas. By using all of these different programs, you can play to their individual stren...

How To: Anatomize the human head, neck and skull

This is a special four-part series on the human head, neck and skull. Medical students can greatly benefit from watch this anatomy video series. Dr. Gita Sinha "dissects" all of the information pertaining to the head and neck. Dr. Sinha is Assistant Professor for the Department of Anatomy & Neurobiology at Dalhouse University. Each of these videos cover a different topic:

How To: Hold your guitar pick in two different ways

Before learning how to play a guitar your going to want to know how to hold your guitar pick. First there is the one finger hold, this looks like you're making a fist. You don't want to make a hard fist but a loose one, not a of strain should be put on the hand. Move your thumb down a little and your first finger too so that it looks like a ribbon or a bow. You have to line up the edge of the pick with the edge of your index finger. Once that is done adopt the hold defined above to complete i...

How To: Draw an anime style angel

In this how to video, you will learn how to draw an angel. First, start out with the basic sketch of the drawing. Remember, eyes go in the middle of the head. Drawing the head first will help proportion the rest of the body. Use long strokes with the wrist to draw the hair. Try to make the hands the size of the face and try to make the fingers look like fish sticks. It is easier to draw if you study anatomy books. Next, erase the sketch and start going in with further detail. Exaggerate the w...

How To: Get rid of head lice with Dr. Su Laurent

Head lice can be a nasty, unwelcome visitor in your life. And if you have children, you're likely to be confronted with an infestation sooner or later. Dr. Su Laurent explains that getting rid of head lice can be a tricky undertaking, but the most important thing is to be persistent. You'll need to wash the hair with the latest lice treatment available, as the lice may adapt to chemicals from year to year. It's very important to follow up this treatment at least one more time, seven days late...

How To: Sing high notes and use your head voice

This video will show you what your head voice is and how to sing high notes. Your head voice is a higher range than your normal chest voice, which can only go a certain range. Your head voice is the voice that occurs when your singing and vibration of your vocal chords is felt higher up than your chest, in your head area. This tutorial will show you how you can find this head voice and demonstrates a good method for exercising your voice so that you will be able to more efficiently sing highe...

How To: Make Star Wars Death Star Popsicles

Hello, in this episode of In the Kitchen with Matt, we will continue with the Star Wars theme, last episode we made Star Wars Death Star Peanut Butter Cups, this episode we are making Star Wars Death Star Popsicles. So we are really getting great value out of our Death Star molds, because of the versatility they provide. These popsicles are super easy to make, if I can make them, you can make them! If you have any comments put them down below, and I will get back to you.

How To: Shuck an Oyster Without an Oyster Knife

There are few kitchen tools as elusive as the oyster knife. Many people—even seafood lovers—don't own one. If you do own one, it probably gets used so infrequently that it gets sent to the very back of the shelf where it proceeds to get lost. Then you accidentally find the knife once a month when you don't need it, but can't for the life of you find the sneaky little thing when you do need it.

How To: Start a fire using a hand drill

This video explains how to start a fire without matches through the use of a hand drill. To start the fire, the process consists of the use of a straight stick or weed such as goldenrod to be used as a hand drill. Hold the stick between both hands while holding it against a piece of wood which has a notch along the side. Press the hand drill stick against the wood near the notch and proceed to roll the stick between both hands. This action will result in the production of heated ash which wil...