Heavy Pipes Search Results

How To: Create a plankton science model

In this tutorial, we learn how to create a plankton science model. You will first need a clear bucket with water, modeling clay, toothpicks, sponge, beads, buttons, pipe cleaners, Styrofoam peanuts, and more. To make the plankton, you will first take the peanut and stick a toothpick into it. Then, add a paperclip on top of that to give it some weight. Drop it into the water and see if it floats or sinks. Add some more weight to it to see how much weight it takes to sink it to the bottom. Have...

How To: Make & decorate the best wishes square cake

With this tutorial, we learn how to make & decorate the best wishes square cake. After you have rolled the fondant out and shaped it onto the cake, you can do more with it! To make the 'best wishes' cake you can sponge some icing onto the sides of the cake. After this, pipe on icing around the bottom of the cake to cover the exterior. Then, use an icing pen on the top of the cake to write out 'best wishes' in cursive writing. Then, draw on some confetti and continue to decorate the cake how y...

How To: Crochet left hand radiant butterfly

In this video, we learn how to crochet a left hand radiant butterfly. First, attach the slipknot to the crochet hook and chain four. Next, work four chain four loops. Slip stitch through the center of the chain four, then chain four again. Continue to do this until you finish one side of the butterfly wing. Next, continue on to create the next butterfly wing by chaining seven, then cut off the additional string after you knot it off. Now, use a pipe cleaner to shape it into the shape of the b...

How To: Draw with basic shapes

In this Fine Art video tutorial you will learn how to draw with basic shapes and apply them. The four basic shapes are spheres, cubes, cylinders and cones. A sphere is a three dimensional circle. On paper it will look flat without shading. Make sure you practice all kinds of circles. A cube is a three dimensional square. You can make a basic cube by drawing two squares and then join the corners. Cylinders are tubes or pipes. Draw two ellipses and join them by lines. If you are just starting o...

How To: Stir fry pad (or phat) Thai with shrimp

In this video, we learn how to make pad thai and stir fry. First, take a hot skillet and add in vegetable or canola oil, shallots, garlic and shrimp. Fry this with beaten egg and add in rice noodles and cook for 2-3 minutes. The pan should be very hot, but do not burn the noodles or shrimp. Next, add in a fish sauce then finally add in your choice of vegetables. Cook this until you see the shrimp is pink all the way through and the vegetables are tender. You can add more seasoning as you wish...

How To: Add a coupler & icing to your decorating bag

In this video tutorial, viewers will learn about decorating bag basics. A decorating bag is used to pipe semi-solid foods by pressing them through a narrow opening at one end for many purposes, including cake decoration. Viewers will learn about the types of decorating bags, how to add a coupler to a decorating bag and the proper way to fill a decorating bag with icing. This video introduces three different types of decorating bags. The bags are the feather white bag, the disposable bag and t...

How To: Make & decorate a vintage celebration cake

This video teaches the secrets of making and decorating a vintage celebration cake. First bake your favorite cake, apply cream over it and get it ready to decorate. Start by using green icing color pipe and design some vines on the cake. Now with violet icing color design the grapes by making beads and make some leaves with a big green icing tip. Use buttercup yellow icing color and make a leaf border all around the cake.

How To: Make molded rose cake decorations

This tutorial shows how to make tiny molded roses and leaves that you could put on cupcakes. To start you only need a few ingredients: icing sugar, water, paste coloring, fondant icing sugar, and a piping bag (optional). Mix all ingredients together, then put them in a bag so they stay soft. Make the color of the rose or petals any color you want. Knead the dough so that you will have the color you would like. Next, break off a piece of the kneaded dough and form it into a cone shape. Break o...

How To: Make a flower out of tissue paper for cards

Lay several layers of tissue paper on top of each other. At least 10 You can use different colors to make a colorful flower or one color to make a flower that is one color. Multiple color flowers are great for 4th of July celebrations (red, white and blue). And single color flowers are great for wedding receptions or graduation parties.

How To: Make a gift bow

In order to decorate your presents during the holiday season, this quick tutorial will show you how to make a beautiful gift bow. Using a somewhat thick ribbon, determine the size of your bow and wind it around itself about 8-12 times, the more winds, the thicker your bow will be. Squeeze the loops of the ribbon together, making the ends overlap on the inside and fold it over. Then make two cuts on a diagonal through the center, making sure that you do not cut through. Unfold the loop and tie...

How To: Make fake intestines

Gross out—and fake out—your friends by making some frighteningly, disgustingly real-looking intestines. Inspired by the Instructables project: http://www.instructables.com/id/Great-looking-disgusting-intestines-for-horror-f/

How To: Cover a cake with fondant sugar paste

In this video cake decorating tutorial, the instructors take you through the steps of learning how to cover a cake with rolled fondant. To follow these directions, you will need a cake made with whole eggs (as that affects the consistency), buttercream icing, piping gel, a one inch brush, rolled fondant, two fondant smoothers, a rolling pin, powdered sugar, cooking spray, and a mini-pizza cutter. Fondant adds a beautiful and impressive finish to a cake, and is not as difficult to apply as one...

How To: Make and play a didgeridoo

This music tutorial video shows how to make a didgeridoo, an aboriginal instrument, out of a PVC pipe, beeswax, and other household materials. Making and playing your own didgeridoo will be easy with the instructions in this helpful how-to video.

How To: Throw pizza dough

With pizza there are really only two ways you can go if you want melt-in-your mouth results: Order from a fine Italian restaurant piping hot and ready to go, or make it at home with your own two hands. Unfortunately, most people either spend lots of dough (sorry, couldn't resist the pun) buying restaurant pizza or frozen pizza at the grocery store (ew).

How To: Choose the appropriate color for cake decorating

In this tutorial, we learn how to choose the appropriate color for cake decorating. First, spoon your icing into a bowl and then add in a small amount of food coloring. Start to mix this together, then add in additional icing if you want a darker or a brighter color to your icing. Experiment with different colors if you feel comfortable with using different ones. Take a parchment bag and roll it into a full, then stripe up the bag. Then, fill the parchment with some icing and this will create...

How To: Make a homemade compost tumbler

In this tutorial, we learn how to make a homemade compost tumbler. Find a large barrel and mount it on a wood frame. You can use recycled materials, like an old pickle barrel if you can find one. There should be an axle in the middle of the wooden posts that runs through the tumbler as well. There should be a pipe in the middle bottom of the barrel to run air through, that will exit through the top where the handles are at. The aeration system will help your compost work properly, so you can ...

How To: Make & decorate a bearing birthday balloon cake

In this video, we learn how to make & decorate a bearing birthday balloon cake. Use a three dimensional pan to make this and use pound cake for a more firm cake. Start with outlining the mouth and doing the facial features. Then, fill the ears in with pink and place stars with icing piping onto the top of the entire area of the bear. To put the bear on the cake, you will place a plastic food rod into the bottom and into the top of the cake. Use markings on the cake to place him in perfectly t...

How To: Clean your espresso machine with citric acid

In this video, we learn how to clean your espresso machine with citric acid. First, mix the acid up with some water in a pouring cup. Then, pour this into the machine and run water through the machine to get the boiler filled up with the acid solution. Run it out the steam wand as well so it has a chance to get into all the pipes and valves. After you have done all the steps, run it out once more with just plain water to clean it out of the citric acid taste. Then, you will be able to run the...

How To: Change your differential oil on a Jeep Grand Cherokee

In this tutorial, we learn how to change your differential oil on a Jeep Grand Cherokee. First, you will need to remove the drain plug from the underneath of the vehicle, then let it drain out onto an oil pan, use a pipe and pump to do this. Once it's finished draining, you will need to replace the plug. After this, grab a new pump and pour your new oil into the pump. Remove the plug again, then pump the oil back into the engine. Once the oil is full, you can replace the drain plug and check ...

How To: Solder copper water lines

In this tutorial, we learn how to solder copper water lines. First, take a sand cloth and thoroughly clean the outside of the tube. Then, take a cleaning brush and clean the inside cup of each side of the fitting. Apply flux to the inside of the fitting, then insert the tube inside. Make sure the tube is inserted into the bottom of the cup properly. Now, take a torch and apply the head to the cup of the fitting. Wait until the solder starts rolling and goes all the way around the fitting. Whe...

How To: Prepare a wall for drilling

In this video we learn how to prepare a wall for drilling. First, check for pipes and cables in the wall using a digital detector. After this, it's a good idea to tape some masking tape with an envelope on the wall to catch and dust and debris that falls off while you are drilling. When you're finished drilling the hole, remove the envelope from the section you are on and continue on to the next part of the wall. It's just that easy to drill a hole in the wall once you know you won't be hitti...

How To: Clean a coffee machine milk frother

This video tutorial is in the Food category which will show you how to clean a Coffee Machine Milk Frother on Katarina. Take a jug with about 400 ml of water and pour about 50 ml of the cleaning liquid in it. Mix it and put the frother pipe in the jug and turn on the frother as if you were frothing milk. Run the entire mixture through the frother and thereafter run some clear water through the frother to remove the remnants of the cleaning agent from inside the frother. Repeat this process af...

How To: Replace and install a kitchen faucet with Lowe's

In this tutorial, we learn how to replace and install a kitchen faucet with Lowe's. Start out and check to see how many pipes you have underneath your faucet. After this, purchase your new faucet and all of the parts that go along with it. Once you have all of these, turn off your water and remove your old faucet. You will need to use screwdrivers and wrenches to remove the handles and the rest of the faucet parts. Once you have this done, insert in your new faucet and all of the appropriate ...

How To: Install a dishwasher

In this video, we learn how to install a dishwasher. First, take out your directions from the package and throw away the rest of the packaging. Also, discard your old dishwasher if you don't need it. Next, attach the PVC hose to the water supply, making sure it's turned off, then connect the valve to the hose. Next, attach the outlet hose to the waste water pipe so the dirty water won't go back into the machine. This only takes around an hour and is a home project that you can do by yourself....

How To: Use radiation detection equipment

In this tutorial, we learn how to use radiation detection equipment. To use the dosimeter, you will remove the cap, then place the pipe on and push down on it. A light will come on, and you can use the knob to zero it. When you look in, you will be able to see it's measured in Roentgens per hour. When you are done using this, zero it again. Next, you will have a CD Geiger counter which has three positions for the knob. Whatever it is set on, you multiply the reading by that number. If you tur...