Heel Length Search Results

How To: Tape the butt end of a hockey stick

In this how to video, you will learn how to tape up a hockey stick. You will need hockey tape and a hockey stick to do this. First, take the tape and wrap it around the tip about two times to make sure it is on nice and tightly. Stretch the tape length to about chest length and then spin it. This will create a cord for more grip. Now, wrap it around the stick about for times with a spacing that matches your fingers. Create a nice spiral while doing this. After this is done, wrap it back up. T...

How To: Style long hair half up and half down with a twist

Julia, AKA Hairbeauty4you, gives detailed instructions on how to do a quick half up-do with a twist in under 10 minutes. She notes that this style is best for medium to long length hair. Julia starts with straight hair, then sections off the top part and clips temporarily. She then separates another section on either side of the top part- from the ear to the clipped section- and pulls it back into a high pony tail and repeats identically on the other side, securing each with clear rubber band...

How To: Install snap tile for your bathroom floor

This is a video which shows how to install snap tile on a bathroom floor. The snam tile has plastic tabs that interlock. First he measures the lengths. Then he takes the tiles outside to be able to use the saw to cut lengths. Next a mark is drawn. The square is used to make straight lines. Make sure to measure twice and cut once. Use the guard on the wet saw so that water doesn't splash. Use the saw gently so as not to damage the tile. After the floor has been snapped into place, the grout is...

How To: Grasp the human physiology of the heart

Want to know what a septum is? An aorta? The bicuspid valve? These are all parts of the human heart, and in these educational tutorial videos, you'll learn all you need to know about the physiology of the human heart. Anatomy, biology, physiology... it's all science, so no matter what field you are studying, these will be very helpful for you in your further medical studies, or for just know-it-all knowledge.

How To: Knead, rise and shape bread dough

First of all you have to be very patient while kneading dough. You need a lightly floured surface to press the dough. Use the heel of your hand to knead the roll down and away in a rolling motion. Give the dough a quarter turn then fold it over and then push it down.

How To: Do a lanyard super cobra stitch

In this Arts & Crafts video tutorial you will learn how to do a lanyard super cobra stitch. For this you will need two pieces of gimp cord; one piece about 15 times longer than the other. Start the same way as you would with a regular cobra stitch. Make a loop on both the cords and pass the loop on the shorter piece through the loop in the longer piece. Then pass the upper end of the longer cord around the shorter cord and pull it up from under through its own loop. Now pull both ends to make...

How To: Do construction paper weaving with your kids

This is a project to keep your kids entertained. It is also a great way to practice hand eye coordination and motor skills. The materials that you are going to need are; construction paper and something to cut the paper with.Depending on the age of the child you can use 3 colors or more for older children and 2 colors for the younger children. Color choice is left up to what the child wants.To get started take a full size sheet of construction paper. Fold this paper in half length-wise. Take ...

How To: Find the surface area of a basic cylinder

First of all cut of the top and the bottom of the cylinder to get two circles. Now take a scissors and cut of the cylinder into two halves from the top to the bottom as shown. Now you get a rectangle shape. You can easily measure the length of the cylinder but to measure the base is a problem. So mark a point on the table with tape and also make a mark on the can or the object you want to measure. Now place the two points over each other. Now use a ruler as a guide and move the can so that th...

How To: Paint window frames

The big question is do you tape or scrape those window frames? If you want to tape. Put two pieces of tape that are longer than the length of each pain. Put them on the top and bottom of the pain. Use your putty knife to hold the tape in place and tear it off a little bit short of the edge. Then put two strips length ways on the pain that is also longer than you need. Take your putty knife and put it in the top corner to hold the tape and tear it off flush to the window frame. Then you paint,...

How To: Create the Elvira "Mistress of the Dark" makeup look

Elvira, Mistress of the Dark, was created in 1981 by Cassandra Peterson. She was the hostess of a local Hollywood horror movie show that became nationally syndicated. Elvira was the first horror host to be nationally syndicated, first person to be broadcast in 3-D on TV, and first female celebrity to do a national beer campaign and market her own beer.

How To: Do Tuck Turn into Fishtails Jitterbug dance move

The Jitterbug is a popular swing dance, also known as the Lindy Hop and East Coast swing. In this how to video, Mike and Tina of Head Over Heels demonstrates a jitterbug sequence involving a tuck turn and fishtails. These steps are quick and easy to learn. Watch this dance tutorial and you will be doing the Jitterbug in no time.

How To: Dance a single step Jitterbug

The Jitterbug is a popular swing dance, also known as the Lindy Hop and East Coast swing. In this how to video, Mike and Tina of Head Over Heels demonstrate the single-step Jitterbug. This step is quick and easy to learn. Watch this dance tutorial and you will be doing the Jitterbug in no time.

How To: Make an easy foot spa

This instructional video will teall you how to make an easy foot bath for home that will keep your feet feeling soft and relaxed. This near-spa treatment is great after a day of hiking around in heels or a great treat during the winter. Your aching feet will thank you when you use this treatment to make them feel great.

How To: Draft a Basic Bodice Pattern

Unlock the secret to clothing design. If you can draft and sew a basic bodice you can design virtually any kind of t-shirt, blouse or other top! Attach a skirt and you now have a dress! Take your measurements by using the guide in the " How to Take Your Measurements" section and let´s get started! If you would rather just whip up an easier beginners t-shirt go to How to Design a Quick T-Shirt.

How To: Sharpen a knife

One of the best parts about cooking is feeling the cold, hard steel of your cooking knife in your hand. The sleek skillful edge doesn't stand a change against any delicacy, unless it's dull. A dull knife takes the fun out of cooking and is actually more dangerous than a sharp knife, so take a moment to sharpen and care for your tools.

How To: Draw Betty Boop

Drawing Now presents this simple video tutorial on how to draw Betty Boop. Begin by drawing an apple shape for her head. In the center of her head draw her part and extend the curved line down to her cheek finishing off with an upturned curl. Next draw the other half of her part and the front curved line of her hair. Then add two circles for her eyes. Inside these circles, shade in small half circle areas so it appears she is looking to the side. On the opposite side of the eye, add an accent...

How To: Use border punches & a stamp

This video is part of the lawn fawn card series and it explains the making of a card using border punches and a stamp.The materials required are a set card-polka dot basics from paper tray ink.This card has a variety of dots on it. Remove the big open circle polka dot and lay it on the aqrualic and place it on a plastic bock with grids on them.Using a color box cover the stamps with ink.Now place the block over the card so that the grid lines with its length and press on it.The polka dots wil...

How To: Make a trigger-operated paper gun

This is an instructive guide to making a trigger operated paper gun. You will need an A4 sheet of paper. Start by rolling the sheet of paper horizontally (breadthways) and as tightly as possible, . Once the roll is completed, attach 3 lengths of sticky tape at each end and the middle, so it doesn't unravel. Then proceed to wrap another sheet of A4 paper around your existing roll, making sure that is as tight as can be so it is strong and sturdy. Again, attach sticky tape at each end and the m...

How To: Make a mini polymer clay tomato for a dollhouse

Garden of Imagination shows you how to make a miniature polymer clay tomato cane to slice and place on top of a doll house hamburger. First, a thin layer of brown clay is rolled flat through a pasta maker and cut into the shape of a cane or long rectangle (with excess clay discarded) and the canes rolled tightly lengthwise. It is rolled by pressure of the fingers to a very small diameter, then cut into one or two inch lengths, and put aside. Next, red clay is mixed with translucent clay to ma...

How To: Know the basics of building a kite

The video is about the basics of building a kite. The wind takes up the kite up. The first is a slate kite. A stable kite capable of flying in very light winds. The wind lifts the kite. The lift acts against the gravity. The tension on the string resists the drag by the wind. To construct such a kite, you need a plastic bag, scissors, some string, sticks. The dimensions are important. It need 45 cms length and 50 cms width in a specific dimension. The all project can be found in website hilar...

How To: Make the traditional arrowhead friendship bracelet

This video teaches you how to make an arrowhead friendship bracelet. The first step is to pick five colors of string. Then cut 2 pieces of string of each color. All 10 strings should be of the same length. Lay out strings adjacent to each other on the table in this color 1, color 2, color 3, color 4, color 5 and then repeat in the same order. Then knot the strings evenly. Now tape the knot onto a hard surface. Separate the strings into two sections, each section should contain 1 of each color...

How To: Make an ethernet patch cable

The following video is about making an Ethernet patch cable using RJ45 cable tool, category 5,5e or 6 cable, RJ45 connectors and optionally a scissors and cable tester. First of all, measure out the length of cable needed for your purpose and then cut it. Strip out the outer insulation of the cable using a cable tool. After stripping the insulation, sort the eight wires inside it in the order orange-striped, orange, green-striped, blue, blue-striped, green, brown-striped and brown. Cut off an...