Hello End Search Results

How To: Make bacon fat soap

Soap can be made from just about any kind of fat. Even though fat from bacon, called lard, isn't the finest of fats to use for making soap, it somehow seemed to be the most exciting. Why? Because bacon is amazing. It has an almost mystical power to it and is a food that can be craved to almost no end. I figured what better way use the extra grease I had from cooking bacon then to turn it into soap!

How To: Make a soldering iron out of a graphite pencil and jumper cables

Now this is one how-to video you probably don't come across often. While most jewelry makers and welders probably purchase their soldering irons, it's actually possible to make your own soldering iron out of graphite pencil, car battery and jumper cables. We know it sounds like you're going to end up lit up like those much-parodied dads trying to set up Christmas lights on the rooftop during the holidays, but this process actually works quite well.

How To: Build your own HD DVR

Want to break free from the confines of DVR land? If you're tired of spending all the money to download program listings from your DVR, then it's time for a change. If you don't want to mess with DRM files anymore, but want to backup your system, then MythTV is the way to go. You'll need to build your own PVR (personal video recorder) with thanks to MythTV, and it will end up costing you less than $500. Well worth the investment. The MythTv software is free and open source, so you just need t...

How To: Make a lighted holiday bow

What a unique bow. Your gifts will be beautiful under the Christmas tree. Materials you will need are: plastic wrap, hot glue, LEDs, scissors, pliers duct tape, glue gun and glue, toothpicks and 3 volt batteries. First you take the plastic wrap and cut it about 5 times the size your bow is going to be. Take the end and push it together. Now make one side of the bow, push together, and make the other side of the bow. Keep going back and forth until the plastic wrap is at the end. The left over...

How To: Do a lanyard super cobra stitch

In this Arts & Crafts video tutorial you will learn how to do a lanyard super cobra stitch. For this you will need two pieces of gimp cord; one piece about 15 times longer than the other. Start the same way as you would with a regular cobra stitch. Make a loop on both the cords and pass the loop on the shorter piece through the loop in the longer piece. Then pass the upper end of the longer cord around the shorter cord and pull it up from under through its own loop. Now pull both ends to make...

How To: Double crochet

How to make a double crochetIn this video we are about to see how to make a double crochet. It is done by chaining two chain stitches. In this case it is of seven chain stitches to get four double crochet. Take the yarn over the hook. Insert the hook into the fourth by skipping three chain stitches. Do yarn over and pull through first loop. Now yarn over and pull through second and third loop is well. Extra chain stitches move over and count as our first double crochet. Do it again that is ya...

How To: Add movement to your still images in Final Cut Pro

In this how-to video, you will learn how to add movement to still images using Final Cut Pro. Click on the view mode button in the canvas window. Set the mode to Image and Wire Frame. Move the canvas play head to the clip you would like to affect, and select the time line. To control the scale, grab the corner to shrink or enlarge. Reposition the clip by clicking on the image and dragging it around. To rotate the clip, move the mouse over the edge and click and drag it to spin it. Select the ...

How To: Create lightning in Photoshop

First of all open an image which shows many different lights in a night background. Now make a new layer now set the color of background to black by first and the foreground color set to white. Click the background for the bottom of the left bar and then pressing 'd'’. Next select the 'gradient' tool. Make sure to select the style from the foreground to background. Select the 'mode' to 'normal' and ‘opacity’ to '100%'. Now drag the top right hand corner to the bottom of the left hand corner. ...

How To: Draw Eeyore from Winnie the Pooh

The user demonstrates how to draw Disney's Eeyore in this video. The first step is to draw a circle about the size of a 50 cent piece for his head and add construction lines to it, including one across the lower part of the circle to use as a reference. The user also suggests creating a mark below the "head" to mark where the end of Eeyore's jaw will be. Then, starting at the bottom cross line, he begins drawing the rounded area of his snout. Next, he draws a straight line from the other side...

How To: Recycle an old t-shirt into a posh pochette

Shiho Masuda demonstrates how to make a T-shirt pochette using recycled materials in this video. You will need an old T-shirt, gardening twine (or leather strap), needle and thread, a ruler, a scissors and a pencil. First, sketch the dimension of your pochette on the T-shirt, staying about 1 inch from the sides of the collar. Next, cut along the lines (save the excess material). Flip the T-shirt inside out and sew the sides together, leaving 1 inch at the top for shoulder straps. Now flip the...

How To: Make a cake decorating fondant/gumpaste bow

1. Use a piece of gum-paste, fondant, or candy clay about the size of a tennis ball 2. I first will roll about 1/2 of the dough through my pasta machine to a medium thickness (#4) or roll your fondant to approx 1/4 in. thickness 3. You could also use a pizza cutter or knife to cut the strips. Take two strips out to be the bow tails and then cut 2 strips in half to make thin little loops for fill-ins 4. Hang the loops over a dowel or large stick such as a broom handle (about 1in wide) 5. Wet t...

How To: Change a string on your guzheng

This video explains how to change a string of guzheng. The process is well described in the video with each and every steps clearly. The thing that is to be done is loosen the peg in a an anticlockwise direction using a tuning tool to remove the string. Thus remove it. If there is no string to begin with then loosen the tuning first before fitting a new string. Than take a new string and insert the pointed end through the hole from the back of the guzheng. To get it on other side pull it thro...

How To: Do a hard reset on a G1 T-Mobile HTC phone

This video is made specifically for G1 T-Mobile users. The author explains to us that there are no instructions in the manual on how to do a hard reset so this video will explain how. The first step to reset the phone is to power down the phone by pressing the end key and then Power Off. Then the next step is to hold the End key and the Home key at the same time when powering the phone on. Once that is done the reset graphic will show up. Once you see the reset graphic show up press the home ...

How To: Make hot dog flavored sausage rolls

David, the one pot chef, shows us how to make a hot dog flavored sausage rolls. Firstly, the sausages are browned up using a frying pan but not totally cooked though. They will be later cooked in the oven. To make things easy, puff pastry is taken and is made to defrost and is cut it into two even pieces. Then, the sausages are taken and are lined up on the pastry and can be chopped off if it goes over the edge. Then on the next line you add a little bit of tomato sauce along with the mustard...

How To: Make spicy octopus sushi

In this how-to video, you will learn how to make Spicy Octopus Sushi. You will need nori, rice, masago, scallions, spicy sauce, tempura flakes, wasabi, lettuce, avocado, octopus, a table spoon and a mixing bowl. You will first roll up two balls of sushi rice into 1 1/2 inches in diameter. Wrap the balls with a third of a 1/2 sheet of nori. Close the ends with some rice to make the ends stick. Grab a small mixing container and spoon and add a small palm full of tempura to it. Add a few pinches...

How To: Do a similarity transformation in Geometry

In this video the author shows how to do similarity transformations. He says that similarity transformations are used to draw the similar images at a different location and the k value is most important while doing this kind of transformation. He says that a negative k value tells that the copy of the shape will end at the opposite side of the origin to the original shape. He says that a positive k value tells that the copy will lie on the same side of the origin. Next thing about the k value...

How To: Make a towel cake for a bridal shower or event

Learn how to make a towel cake for a bridal shower with this video! To make a towel cake start by folding a towel into a flat square. Then take a second towel and fold it in half. Lay the half folded towel on the table. Lay the towel that is folded into a square on the middle of the towel folded in half. Fold one end of the half folded towel over the folded towel and tuck it under. Then take the other side of the towel and fold it over and tuck it under making a larger folded towel square. Ta...

How To: Install a glass vessel sink or countertop

This video tutorial shows you how to install a glass vessel sink or countertop. First you need to make sure that the glass vessel sink or countertop has all of the pieces needed and that none of the pieces are scratched or broken. You then need to place the mouthing ring on the countertop where the sink is going to go. Make sure that the rubber side is facing down. Then carefully set the sink on the mouthing ring. You must then take off the tail piece of the pop up drain. Take off the ridge a...

Walkthrough Assassin's Creed: Bloodlines: Mission 10

Mission 10 on the Sony PSP takes you through finding the ship for Kyrenia to deliver Alexander's message to the crewmen without being discovered. The path to the Crewman is relatively free of guards if you stick to rooftops as much as possible. Then, leap down to the docks below. The manifest is located on the big ship docked at the Port. Take the ladder down to the deck below and follow your nose to the manifest. With it now in your possession, take it to Alexander. For more info, watch the ...

How To: Make 6-Sided Kirigami Snowflakes

We've all made them. I remember making hundreds of paper snowflakes when I was in elementary school. You take a piece of paper and fold it in half, then fold it in half again. You now have a piece that is one fourth the size of the original. Now you fold it in half diagonally. You then cut slices out of the edges of the paper, and unfold to find that you have created a snowflake. The resulting snowflake has four lines of symmetry and looks something like this: If you fold it in half diagonall...