Hold Awesome Search Results

How To: Hide your stash in a computer

Learn how to turn an old computer into an awesome hiding place. First, unbolt the fan and remove it. Pop open the side metal casing to get inside. Remove the fan and any wiring, then unbolt and remove the motherboard. Once you've removed everything, clean out the dust. Now you have a place to hide your stash!

How To: Do woven pigtails on your American Girl doll

In this video from stephenswodadancer we learn how to do woven pigtails on an American girl doll. Start by parting the hair in the middle down the back and put one to the side in a pony tail and on the other side, take a section from the top and twist it. Then take another small section and twist. It does get harder as it goes on because you're not able to hold on to everything. Make one more piece of hair twisted as well. Now take all 3 pieces and tie them together. Now put the remaining hai...

How To: Thread a sewing machine and wind a bobbin

In order to thread your sewing machine and wind a bobbin, you will need the following, a sewing machine an empty bobbin, thread, and a pedal control for your sewing machine. Choose a good quality thread. Place the thread in the holder on top of the machine. Place the cap on the end of the thread, in order to hold it in place. Loop the thread around the first guide. String the thread through the hole in the bobbin. Place the bobbin in the slot on the top of the machine. Hold the thread in you ...

How To: Broomstick lace crochet

If you're into knitting and crocheting, you probably know it all. But what about a broomstick lace crochet? If you haven't attempted this fine crochet pattern, you must… now! Broomstick lace crochet forms a visually interesting and beautiful stitch.

How To: Play "Prenzlauerberg" by Beirut on the accordion

In this video you are shown how to play Prenzlauerberg on accordion. You will use the right hand for the melody. Both hands will be used. Your tutor divides the song into three playable components, after you develop skill in playing them you can piece them together. The song starts on G, the chords played include G minor, C minor and D7. The D7 chord includes the notes D, F sharp and C. When playing a chord you hold all of the notes (keys) of the chord at the same time. Also, playing D7 chord...

How To: Determine your skin tone

In this editon of Tip Tuesday from Pursebuzz we are shown how to determine your skin tone. This tip is a pretty simple way to determine if you're a warm or a cold tone, and if you are pink-based or yellow-based. That's the first question you're asked if you go to a counter and you're trying to figure out your foundation colors or your blush colors or shadows, or what will work for you. The first test is the fabric test. You don't even have to buy this fabric. You could just go to a fabric sto...

How To: Hold an acoustic guitar correctly

True Fire TV and Guitar Lessons for Beginners demonstrate how to correctly hold an electric guitar. Good posture and hand positions will affect the sounds that you are making. Cross your legs to prop up your guitar which gives you more flexibility and freedom. Prop out the neck for better hand and finger positions. Don't look over the guitar. Remain loose, comfortable and relaxed. The left hand fingers should be close to the end of the fret. Press the strings only as hard as you need to using...

How To: Create futuristic wallpaper in Adobe Photoshop CS3

This how to video shows you how to create wallpaper for your computer desktop. Open Photoshop and create a new file. Change the dimensions to the size of your desktop. Click okay and go to edit and fill. Choose color and select black. Click okay to fill the screen with black. Duplicate the layer. Once this is done, go to filter, render, and lens flare. Make sure the lens flare is in the center. Edit the settings to your liking. Click okay to add the effect on to the image. Go to filter, disto...

How To: Swap the hard drive on a second-generation iMac G3

bghoo8313 describes how to swap an imac G3 hard drive. Unscrew knob on the hatch on the back of the computer unit. Remove the RAM and the card. Take out 4 screws, 2 on the top and the other 2 under the guard. Pry it open with a screwdriver. Take out the outer screws under the guard. Open the unit from the "Apple" logo on the back. You will hear snaps, but the unit is not damaged. There are 6 radiation screws, take them out. Use a magnetic head screwdriver to avoid dropping screws. There are 4...

How To: Fix a wet cell phone or a jammed ipod

Today's Tech shows you how to fix a cell phone or computer that has gotten wet or jammed. With a wet cell phone, you must act quickly or it may be permanently damaged. The first thing you should do after pulling it out of the water is to take the battery and SIM card out. Dry both of them off. If you drop it in a liquid that is not water, rinse them off quickly. If you have a vacuum cleaner handy, you can use it to suck the water off. You can also place the phone on top of your cable box. Wai...

How To: Make your own kilt pin in minutes

First of all you need roll of wire around 1 or 1.25 millimeter thick. Now take the roll of wire and using a round nose pliers bend the wire about 5 cm. now take a flat nose pliers and the hold the ends and bend it round to make a hook. Now taper off the end and then straighten the wire. This shall be the top portion of your pin. Now take round nose pliers and then wrap it in a complete circle and then repeat it two more times. This shall produce three loops and you can also adjust the length ...

How To: Perform a front flip on a wakeboard

In this how-to video, you will learn how to do a front flip using a wake board. The goal is to take it big and take it out to the flats. Do not cut out as far as you can. Take the handle locked in the same position, comfortably towards the chest. This is held in the same position throughout the flip. As for the body position, notice that the rider is in a comfortable knees bent position. Slowly ride off the edge as you approach the wake. This will lessen the pull of the rope at takeoff. This ...

How To: Make a homemade designer-style handbag

First you must take inventory of all items in order to be able to create your bag. Make sure all labels are in the correct order. Lining should be ready before attempting to begin construction. The stay should be 10in long and 4in wide. Pocket the stays and glue the stays to the outside fabric. Use the notches to line everything up. Take the magnetic snap and attach it to the front and back. Take a knife and cut holes for the magnetic snap. The magnetic snap comes with a washer. Use cardboard...

How To: Improve figure skating spirals with a stretch routine

In this video, you will learn how to stretch your back to strengthen your spirals while figure skating. First, lay on your stomach. Next, lift your arm and opposite leg in the air. Hold this for a few seconds and then alternate. The next exercise involve bringing your back up in a vertical position while laying down. Next, stand up and stretch your arm over your head towards your side. Alternate the arms with this exercise. You can practice your balance by standing on one leg and holding the ...

How To: Sharpen a knife on a Triple Oil Stone

sumaps2 describes how to sharpen a knife using a triple oil stone. The stone itself consists of three stones: a coarse stone, a medium coarse stone, and a fine stone. First, you must place the stone in a reservoir which has been filled with oil. In this example, transmission fluid is used because of its ability to keep metal from binding to the stone. However, you must be extra careful in washing the knives afterwards. All your knives can be sharpened with the triple oil stone, from your pari...

How To: Prank a Coworker or Friend by Flipping Their Computer Screen Upside-Down

The perfect way to avoid boredom at work or in the classroom is with a good old-fashioned prank, and this one is for tech-minded. In the video below, you'll see how to change your coworker's (or classmate's) computer screen to be display upside-down, which will totally freak them out when they return from lunch or the restroom. The best part is watching them try to revert it back to normal!

How To: Set up the D80 pop-up flash as commander for Nikon CLS

These are the steps required to set your D80's pop-up flash. First, go to the "Custom Shooting Menu." Then you choose #22 on the screen: "Built in Flash." Choose the "Commander Mode" option. The modes that are available for the pop-up flash include TTL, AA (Auto Aperture) M (Manual) and Off (no flash). If you are using an external flash unit, you use either group A or B. The light frequencies and proper settings are related to how much light compensation is needed. +3. 0 is high power, 1. 1 i...

How To: Manually white balance a Nikon DSLR with the BaLens

In this video you will learn how to manually white balance a Nikon camera using the Ba-lens. Paul Franklin explains in a few simple steps. First take the lens cap of the appropriate size and put it on the lens. Then go to the camera and set the meter to spot meter he says its important because it measure the amount of light going through the little dome as he shows. Once you've set it all you need to find the white balance button. Then scroll through the icons until you reach preset. Then hol...

How To: Make a miniature crossbow

This is an awesome mini cross bow that will really shoot. You just need some tape, a rubber band and a pen and you’ll be on your way to making this cool toy. It’s not very difficult and can be done in just a few minutes.

How To: Clean the throttle body on a Saturn S-series car

Richpin demonstrates how to clean the throttle body on a Saturn S-series car. First, remove the accelerator cables using a tool like a pen. Next, remove the top hose. Remove the wires from the throttle position sensor. In the back are wires for the idle control valve. Remove them. Remove the 10 millimeter nuts and bolts and brackets by the EGR. Once the hardware is removed, tap the top with a screwdriver and the throttle body will come off. From the throttle body, remove the throttle position...

How To: Do a cute easy hairstyle on your American Girl

Steps on how to do a cute easy hairstyle on your American girl. You need: - a brush - three small hair clips Steps: 1. Brush the doll's hair to smoothen and soften it. 2. Take a little hair section on the front. 3 Take the same amount of hair on the other side. 4. Bring the two hair sections that you are holding to the middle of the back of her head. 5. Get a clip to clip the hair. 6. Take another hair section from above her ear on both sides. 7. Bring the hair to the middle of the back of he...