Hypoallergenic Handles Search Results

How To: Download and read full book in the Nintendo DS

What's one of the best things you can do with your Nintendo DS? Read. Yeah, is it really better than playing video games? Only if you like to read. And you can read your favorite books anytime or anywhere with the Nintendo DS! Download as much as your Micro SD card can handle. There are only three simple steps to this process, so watch the video for the step-by-step instructions.

How To: Race cars on the Buttonwillow track

Instructional video of Buttonwillow Raceway in a stock RSX type S race car. This is on a clockwise track configuration. This Buttonwillow Raceway video shows you how to handle the turns and race the track well. They describe the pit lane as well as the protocol of leaving the pit. Stay on the left hand side when you enter. There are several 90 degree turns.

How To: Perform the card flourish the Scissor Cat Display

Learn how to perform the Scissor Cat Display with cute, female magician Baby Cat. First, Baby Cat demonstrates the methods & then goes into the display. Watch carefully, and with practice you will be able to perform the Scissor Cat Display card flourish trick as well as your instructor. Card flourish is a term magicians use for the skill & technique of card handling. No magic is performed, card flourishes just amaze and display the dexterity of a magician's hands.

How To: Do an anterior shoulder stretch

Limber up your shoulders with exercises and stretches for your workout routine in this fitness video. Take action: use a pole, punching bag or handle, lean away from your arm as you stretch, fully straightening arm as the stretch increases and hold 15 to 30 seconds. Tom Clifford, the instructor in this how-to video, has a degree in physical education, fitness and health from Eastern Michigan University, where he ran track and cross-country. Tom has worked as a personal trainer for two years. ...

How To: Do upper back stretches

Limber up your back with exercises and stretches for your workout routine in this fitness video. Take action: to find an ideal position use a pole or handle, hold for 15 to 30 seconds while holding the pole lower to target lower back, and change grips. Tom Clifford, the instructor in this how-to video, has a degree in physical education, fitness and health from Eastern Michigan University, where he ran track and cross-country. Tom has worked as a personal trainer for two years. He also has a ...

How To: Do shoulder exercises using cables

Use cable weight machines for shoulder exercises. Learn tips and techniques for working out the chest, back, shoulders, and arms in this weightlifting video. Take action: work anterior and lateral deltoids by pulling handle straight up to side, but don't lock elbows, raise arms straight out to the front. Lance is certified personal trainer through American Fitness Association of America. He graduated from UNC with a biology degree and currently works for a gym. He specializes in weight traini...

How To: Do back compound exercises

Work out multiple back muscles with compound exercises. Learn tips and techniques for working out the chest, back, shoulders, and arms in this free weightlifting video. Take action: grip handles on the outsides, cross legs, bring chin to top of the bar, and return slowly, but don't swing legs. Lance, the instructor in this how-to video, is certified personal trainer through American Fitness Association of America. He graduated from UNC with a biology degree and currently works for a gym. He s...

How To: Properly hold drumsticks

Holding your drumsticks correctly will reduce tension and give you greater speed and control in playing while reducing fatigue. In this video tutorial, DRUM! Magazine music editor Wally Schnalle demonstrates how to properly hold drumsticks and provides tips for best performance. Get a handle on drumstick grips with this how-to.

How To: Make a Taurus fall in love with you

Those born under the Taurus sign need to be handled with kid gloves. To trap a Taurus you will need a loyal nature, a strong sense of self image an a respect for money. Take the tie to look extra special for your Taurus since they pay particular attention to appearances. Learn how to use astrology advice in dating, by watching this how-to video. Pick up astrology tips on making a relationship with a Taurus work.

How To: Craft a duct tape tote bag

Anyone can go to the store and buy a bag, but how many people are going to have a handmade duct tape bag? Show your creativity and style by choosing a wacky color and show up with this whimsical tote bag.

How To: Make a paper cup cake/muffin basket

In this tutorial, we learn how to make a paper cup cake/muffin basket. First, take a piece of paper and fold it in half. After this, curl the edges up from each of the corners until you end up with a small square in the middle of the paper. Use scissors to create slits where you will make the tabs to construct the box. After all the tabs are cut, push them together so you have a small basket with a neat line. To finish this up, add a handle to the top and push into the sides. Then, draw on an...

How To: Manage Office themes when using Microsoft Excel 2011

Need some help figuring out how to handle Office themes from within Excel 2011? This video will show you how it's done. Whether you're new to Microsoft's popular digital spreadsheet application, new to Excel 2011 or even an expert merely looking to brush up on the fundamentals, you're sure to be well served by this quality video tutorial from the folks at Lynda. For all of the details, and to get started better managing Office theme settings yourself, watch the video.

How To: Make a Deadpool sword

In this tutorial, we learn how to make a Deadpool sword. To do this, you will need: a marker, scissors, hard plastic, cardboard, silver spray paint, duct tape, saw, electrical tape, sandpaper, and hot glue gun. First, cut the plastic into three thin knife shapes. Then, use sandpaper to smooth edges. Then, use the cardboard to create three layers of a rectangle. Make the corners round and then tape around them with duct tape. Put a hole in the middle and then put it into the plastic. Now, glue...

How To: Juice a pomegranate

In this tutorial, we learn how to juice a pomegranate. To do this, you will need a power juicer that can handle you juicing this fruit. Start off by cutting the pomegranate open and then scooping the seeds out of it. Once you do this, load the seeds inside of your juicer and turn it on. Then, you will hear the seeds start to become crushed inside. Place a cup underneath the spout of the machine and then finish loading up the seeds to the machine. When finished, you will have pure and natural ...

How To: Make a Spartan 300 shield

In this tutorial, we learn how to make a Spartan 300 shield. You will need: paper mache, durable cloth, gold spray paint, newspapers, cardboard, nuts and bolts, and the cap to a trash can. After you have these, cut out a large piece of cardboard and place it over the trash can cap in a circle shape. Then, dip newspaper strips into the paper mache mixture and apply it to your shield, taking your time to make it smooth. Let this dry, then cut two strips of cardboard and place it in a 'v' shape ...

How To: Make a homemade compost tumbler

In this tutorial, we learn how to make a homemade compost tumbler. Find a large barrel and mount it on a wood frame. You can use recycled materials, like an old pickle barrel if you can find one. There should be an axle in the middle of the wooden posts that runs through the tumbler as well. There should be a pipe in the middle bottom of the barrel to run air through, that will exit through the top where the handles are at. The aeration system will help your compost work properly, so you can ...

How To: Repair a ceramic disc tap

In this tutorial we learn how to repair a ceramic disc tap. You will need: adjustable spanner, flathead screwdriver, Allen key, and ceramic disc to do this. To start, you will prepare the sink by turning the water off. Then, remove the tap head using the tools that you grabbed. Once off, grab the cartridge from the inside using the wrench. Once you reinstall the disc tap you will replace all the parts back on top of the handle. When you're finished, turn the water back on and then see if the ...

How To: Make and arrange a painting palette

In this tutorial, we learn how to make and arrange a painting palette. First, you will need to buy a large palette that can handle a lot of different colors on it. Now, use the sides to add in the different colors that you are going to use. Use the middle of the palette to mix up colors while you are painting or doing different crafts. You can also use a large paper plate to make a paint palette if you don't have a palette nearby. Anything that is flat with a lot of room on it will work, so g...

How To: Adjust your headset

In this video, we learn how to adjust your head seat. You want to make sure the top of your stem is adjusted correctly and the spacers are adjusted correctly. Go in and tighten the top cap pole until it's just snug. Then, when you grab your bike and roll it forward, go in and tighten it some more. If it's too tight, it's going to bind up and you won't be able to turn your handle bars. Loosen them up as much as you can without them being too loose. From here, you will be able to ride your bike...

How To: Cut plastic push-fit pipe

In this video, we learn how to cut plastic push-fit pipe. Make sure you never use a hack saw to cut the push-fit pipe because it can damage the O-ring in the connector. What you need is a pair of dedicated plastic pipe cutters. Once you have this, put your pipe in the middle of the cutters and then push down on the handles. After this, your will cut the pipe and it will com out nice and clean. From here you will be able to fit a connector into the pipe and continue to use it rather than ruini...

How To: Make your own cheap camera dolly

In this video we learn how to make your own cheap camera dolly. First, place down two PVC pipes and place a board on top of that. Then, you can place the tripod on top of that. You can use this to take shots where the camera is sliding from one position to the next but you want to avoid shake from someone handling the camera. Make sure to glue wheels and a track to the board that you place on top of the pipe and it will travel along them more easily. Enjoy using this and have fun making diffe...

How To: Create a glowing shimmery makeup look with neutrals

Take it from us: Shimmery makeup is REALLY easy to go overboard with. While fine, minute shimmer flecks are easier to handle, thick, coarse glitter that's evident even when you look in the eyeshadow or blush pan means it's going to make your face light up like Christmas morning...in the tackiest, most blinding way possible.

How To: Make a ferro fluid

In this video, we learn how to make Ferro fluid. This is a magnetic fluid that you can easily make at home. To do this, you will need: laser jet toner, rare earth magnet, and some vegetable oil. Now, pour the toner into a cup (50 ml), then put 2 tbs of vegetable oil into this cup as well and stir it together until you have a thin consistency. Now, transfer into a smaller jar so you can handle it easier. Now test this fluid by taking the earth magnet and putting it to the bottom of the jar. No...

How To: Replace and install a kitchen faucet with Lowe's

In this tutorial, we learn how to replace and install a kitchen faucet with Lowe's. Start out and check to see how many pipes you have underneath your faucet. After this, purchase your new faucet and all of the parts that go along with it. Once you have all of these, turn off your water and remove your old faucet. You will need to use screwdrivers and wrenches to remove the handles and the rest of the faucet parts. Once you have this done, insert in your new faucet and all of the appropriate ...

How To: Understand the parts of a mountain bike

In this video, we learn how to understand the parts of a mountain bike. First, grab your mountain bike and go to the front of it. The front starts with the handle bars, brake levers, shifter, cord, tire, rim, spokes, and brakes. In the back, there is: a crank, rig railer, front railer, frame, top and bottom tubes, head set, chain, and seat. Once you understand what all these are called and where they are, you will better understand how to ride the bike the best you can. You can completely cus...

How To: Remove and perform maintenance on Nitro brakes

In this video, we learn how to remove and perform maintenance on Nitro brakes. First, you will need to make sure you have the correct size of screwdrivers before you begin. Now, you will proceed to remove the brakes from the transmission. Make sure to handle these with care and take your time. Set all the parts that you remove aside and in order so you don't forget where they are and where they go. After this, align your brakes so they work correctly, then start to replace all the parts that ...

How To: Remove an automobile headliner

In this video, we learn how to remove an automobile headliner on a Saturn S-series. First, you need to remove the back cushion and then take the back rest on the seat, then lay it down. After this, remove the dome light and remove all the grab handles from the vehicle. Next, remove both visors and screws, then remove the mouth on the seat belt and bolts. After this, remove the cover on the back brake light, then the trim that runs along the side of the inside of the car on both sides. Once yo...

How To: Refill ink in a pocket brush pen

In this video, we learn how to refill ink a pocket brush pen with Henry Lee. First, mix water with the ink, depending on the color of ink you want. After this, you will take the pen and soak it in water, then into the ink. Turn the knob on the handle as you do this so the ink starts to infuse into the pen. To get more ink in, point the brush to the sky and turn the knob slowly to drive the extra air out of the pen. Then, dip the pen into the ink and turn the knob in the other direction. Conti...

How To: Properly prepare and deep fry a turkey

Kat teaches us how to properly prepare and deep fry a turkey in this tutorial. First, make sure you have at turkey that is all the way thawed and your oil is heated up to 375 degrees outside near nothing that can catch on fire. After this, dry the turkey off completely so there is no moisture left on it. After this, you can apply a dry rub to the turkey, then stick it onto the deep frying handle. Place protective gear onto your body, then slowly push the turkey down into the oil. Let it cook ...

How To: Draw a Harley-Davidson Road Glide

In this video, we learn how to draw a Harley Davidson Road Glide. Start off by drawing the body of the motorcycle as a rough outline. After this, start to fill in the different areas by making large sections of the bike 3-D. Draw in the wheels and the back of the bike, as well as the handle bars, mirrors, and lights. Draw the seat and back seat in, then start to add in further details. Apply shadowing to the car, making some parts darker than others. When you are finished with the drawing, co...

How To: Remove a rear inside door panel from a Saturn S series

In this tutorial, we learn how to remove a rear inside door panel from a Saturn S series. First, open the door and take off the handle to the door, then remove the screw inside of that. After this, unlatch the side of the door and unscrew the bolts from this. Now, go inside the side pocket of the door and remove the screws from that, then set aside. Remove the foam padding against the inside of the door, then loosen up the wires on the inside of it. Now you will be able to remove the door and...

How To: Change the front main seal on a Porsche 944 or 951

If you own a Porsche, chances are you know how difficult it may be to work on it yourself without the proper help. Taking it to the mechanic is a safe way of making sure your car will be fine, but it's very expensive. Doing it yourself can be difficult, but if you have a good how to video or article it should be fine.