Identify Hot Search Results

How To: Do a cool advanced tutting combo

The variety of tutting combos you can learn and create is limited only by your creativity. If you've already got some good moves and you're looking for an advanced combo to add to your repertoire, watch this video. It will teach you step-by-step how to do a really hot tutting combo.

How To: Create CSS rollovers in Adobe Dreamweaver CS4

Rollovers are hot, and CSS rollovers are hotter still. Learn how to create your own CSS rollovers when working in Adobe Dreamweaver CS4. Whether you're new to Adobe's popular WISYWIG HTML editor or a seasoned web development professional just looking to better acquaint yourself with the CS4 workflow, you're sure to be well served by this video tutorial. For more information, including a step-by-step overview, watch this free video guide.

How To: Disassemble and clean the Tippmann A-5 Flatline barrel

First of all take one eight inch 'Ellen ' wrench and take off the back screw. Now you have to slide out the back plate. There is no need to take the front plate apart. You can clean it using some hot water.You can run hot water over it for a minute. You can also set it in a sink and then run hot water from the tap. You can see a scratch mark on the shaft. That is there to show you the vertical. Now insert in to the round so that this mark is in line with a little mark over it. If it is not al...

How To: Identify and control the pine tip moth

This is a tutorial for controlling the Pine tip moth. Identifying and controlling the pine tip moth consists of studying the small plants of pine. The attacks on pine trees is caused by Nantucket pine tree moth found along the Rio Grande Valley as far north as Espanola, it has spread to South Arizona and California by importing grafts from Mexico. The moths are 3/8 inch long reddish brown to grey in color. They attack the main stem of the baby plant and the pines instead of growing vertical g...

How To: Identify fruit tree problems

This video describes problems with fruit trees and how to deal with them. One problem is Chlorosis, identified by yellowing leaves with green veins between the sections of the leaf. This is caused by a micronutrient deficiency (usually iron) that results when the tree roots are unable to absorb all the nutrients from the soil. This problem can be temporarily treated with a foliar spray of iron. Another problem is pruning wounds with decay that results when trees are not pruned correctly. They...

How To: Identify problems with pecans & pruning grapevines

Master Gardener Rosamarie Maddox asks John White, Doña Ana County Extension Agent, about problems facing her pecans, grapevines, and native shrubs. An unidentified insect found on her pecan tree is identified by John White as a Twice Stabbed Ladybug. This ladybug is a useful insect that often over-winters on the tree and helps takes care of the aphid problems faced by pecans. Pink fuzzy coating on pecan nuts is also brought up. The coating is normal for pecan and contains bitter tannin. Too m...

How To: Identify pinon needle scale

Identify pinion needle scaleWe are going to look at this insect because eggs are being laid. Two year old needles are being cast off. This is a sign of infestation. There is also sparse, open foliage. This tends to be a chronic infestation. The insect is the pinion needle scale. You can see tiny, bean shaped bumps on the 2 year old needles. The insects move to last years new growth and feast on the sap of the needle all summer. You can see egg masses and web on the trunk of the tree. The inse...

How To: Identify problems with snails & slugs

Snails and slugs can really be a problem sometimes if you are a gardener. They feed on plants and can be considered pests, sometimes even getting inside your house. They are identified by their tell-tale slime trails. A bad infestation can be very hard to deal with. However, specialized cleaners or fertilizers can help your garden snail-free.

How To: Tilt-shift photography to create a miniature effect

Kipkay from Make Magazine shows us how to create a photographic illusion, making things look smaller than they really are with tilt-shift photography. Materials needed include rubber plunger, an oversized lens, a plastic body cap, a single lens (or digital single lens) camera, a hot glue gun, a sanding file, and a disposable object for a plastic backing, such as a VHS tape case. With this great tutorial and a little work, create the illusion of a miniaturized world with this photographic tech...

How To: Identify and treat a 'hurry case' as a Boy Scout

Second Class Boy Scouts work on building their outdoor survival and camping skills. Compass work, nature observation, camp tools, and swimming are areas where new skills are mastered and demonstrated. A second class scout, having completed all the requirements, should be able to lead a hike, care for his own equipment, set up a campsite, and perform basic first aid.

How To: Make s'mores

The hot dogs are all eaten and the fire is still crackling; it's the perfect time to make some delicious s'mores. You will need marshmallows, chocolate bars, graham crackers, a wooden stick or metal roasting fork, and a campfire. S'mores are a camping and outdoor food favorite, but can be made at home with a microwave. Watch this video cooking tutorial and learn how to make s'mores.

How To: Make your fingers smoke

Are you so hot you're smokin'? Well you will be if you can pull the magic trick in this how-to video off! Watch this instructional video and see just how to make your fingers smoke. This trick can be tried out any time you've got a box of matches and a water faucet handy.

How To: Revolutionize Your Coffee Game with These Cold Brew Hacks

Summer is right around the corner, which means it's time to switch from perfect hot coffee to perfect cold coffee. A nice icy glass of cold coffee is wildly refreshing and just plain delicious. In my opinion, it's the key to enjoying any sunny day (warning: if you don't already drink cold coffee, you may find yourself drinking four or five glasses a day very quickly).

How To: Apply hot liquid eyeliner

In this tutorial, we learn how to apply hot liquid eyeliner. First, line the eye with a slanted eyeliner brush that has been dipped into the liquid eyeliner. Line from the inside corner to the eye out to the outside of the eye. Pull the lid up gently so you can really push the eyeliner into the lashes to make them look darker and fuller. After this, line the outside corner of the eye and make a light flare if you would like a more dramatic look. This will finish the eyeliner look, have fun wi...

How To: Cook fried pumpkin

In this video, we learn how to cook fried pumpkin. You will need: pumpkin, beaten egg, flour, and hot oil. First, take the pumpkin and place it into the egg. From here, pour the flour in a bag and then put the pumpkin in side the bag and shake it until it's coated. Next, place the pumpkin pieces into a skillet that has hot oil in it. Cook the pumpkin on both sides until it's dark golden brown everywhere. Place these onto a paper towel to drain the excess oil. Sprinkle on some salt and enjoy t...

How To: Use foam to make diorama terrain

In this tutorial, we learn how to use foam to make diorama terrain. Foam will make a realistic diorama because it comes in so many different shapes and sizes. You can buy this from hobby shops and even online. To put these together, you will simply use some wood glue. You can easily cut this with a sharp knife, scissors, and anything else that is sharp! You can use a hot wire cutting tool to mold and sculpt the foam as well. You can also use a hot glue gun to connect the pieces of foam togeth...

How To: Mix a Hot Tub cocktail with vodka, champagne, Chambord & Grand Marnier

Want to make a Hot Tub cocktail like a champion bartender? This clip will show you how it's done. With the proper technique, mixing the perfect drink can be easy. So easy, in fact, that this free video bartenders' guide can present an overview of the process in about a minute's time. For more information, including a full list of ingredients and complete instructions on how to mix this drink yourself, take a look.

How To: Create a freaky moth makeup look for Halloween

Talk about unconventional Halloween costumes. Forget hot vampires and hot werewolves; it's all about sexy moths this Halloween. But rather than going with cheesy wings and antennae, we're talking deep, sunken eyes with eyebrows that extend out into moth-like wings and black lipstick. To learn how to create this awesome look, check out the video.

How To: Make fursuit eyes for a mask

In this tutorial, we learn how to make fur suit eyes for a mask. First, grab a simple paint pallet that has dips down in it for the paint. Then, cut the dips out of the tray they come in with a small saw. Then, grab a hot glue gun and melt down the middle of the dip so it's hollow. Then, apply hot glue to the top of the hollowed out eyes. Then, apply felt around this and cut it out so you can see the eye. Push the material through the bottom to create the pupil, then your eyes are finished.

How To: Build a Tech Deck quarterpipe

This is a video tutorial in the Hobbies & Toys category where you are going to learn how to build a Tech Deck quarter-pipe. For this you will need hot glue gun, hot glue sticks, coat hanger, cardboard, card and scissors. First cut out the three pieces of the frame out of the cardboard. Then glue a support to the bottom of the 3 pieces. Now glue the card on top of the frame. To make the coping, cut off a length of the coat hanger that is equal to the width of the quarter -pipe and glue on the ...

How To: Make the perfect crab fried rice

In this tutorial, we learn how to make the perfect crab fried rice. First, you will need a cup and half of cold cooked basmati rice, meat from 2 crabs, 2 large eggs, spring onions (cut into strips), crushed garlic, 2 tbsp yellow bean sauce, 2 tbsp light soy sauce, salt, and pepper. Now, combine 1/4 c water with bean sauce, soy sauce, sugar, white pepper, and salt. Mix together until well combined and dissolved, then scramble the eggs in a hot frying pan with butter. Set these aside, then fry ...

How To: Make an easy hair bow

In this tutorial, we learn how to make an easy hair bow. First, grab some thick ribbon in any color or material that you want to have. Use more ribbon if you want a larger one and less if you want a smaller one. Measure it out or use your eye to measure. After this, heat seal the ends so they don't fray by passing them through a lighter quickly. Now, fold the ribbon in half length wise, then place a crease there. After this, use a hot glue gun to fold down the two sides of the ribbon with a k...

How To: Make a Thai curry with tofu & mushroom

In this video, we learn how to make Thai curry with tofu and mushrooms. You will need: 12 oz firm drained tofu, 2 tbsp vegetable oil, 1 sliced medium onion, 1 lb fresh mushrooms, 1 can coconut milk, 3/4 c vegetable broth, 2-3 tsp green curry paste, 2 tsp grated lime rind, 1 tbsp fish sauce, 2 c halved green beans, 1/3 c diced red pepper, 2 tsp sugar, 1/2 tsp lime juice, 2 sliced green onions, and 2 c hot jasmine rice. First, cut tofu into cubes, then place in a wok with oil and onion for 5 mi...

How To: Build a magnetic stirring device

In this video, we learn how to build a magnetic stirring device. First you will need: a block of 1 inch thick Styrofoam, a piece of cardboard, 2 magnets, a small electric motor, a piece of non-magnetic metal, a hot glue gun, and a soldering iron. First, draw the shape of your cardboard square on the foam and cut it out. After this, take your soldering iron and melt away the Styrofoam from the outside. Then, make a hole in the middle for where the motor will be placed and push it inside. After...