Impressive Size Search Results

How To: Make a mini uzi out of paper

Learn to make this easy mini paper Uzi gun for gaming with your friends! Supplies: Scissors, Scotch tape (Note: DO NOT USE MASKING TAPE OR DUCT TAPE; IT WILL NOT TURN OUT WELL), lots of paper. 1. Take one piece of paper and roll it up from top to bottom to make a short tube. Tape it. 2. Take another sheet of paper and do the exact same thing that you did to the first one and tape it as well. 3. Take a sheet of paper and roll it up from side to side (long ways). Make the hole in the middle abo...

How To: Transform into a doll for Halloween

1. Remove the old makeup and sealer. If you are working on a vinyl or resin doll, you can remove the makeup with a non-acetone nail polish remover. Afterward, wash the face well with soap and water. Work at any stubborn stains with a Mr. Clean Magic Eraser. 2. Sand the head, if necessary. Sometimes dolls will come with set-in stains that no stain remover can touch, or with scratches and gouges in the face. If your doll head is made of resin, in particular, do all your sanding underwater to pr...

How To: Fold an origami paper rose

Fold paper in 1/2. Fold in half again into a square. Fold in half again, & again into a square about 1/16 of original size. Unfold paper. Fold marks divide paper into 16 small squares. Make 2 diagonal folds in each direction to form a big X in paper. Position paper with inside of folds facing you; fold paper in 1/2 again to form a rectangle. Using previous fold lines, fold lower 1/2 of paper in 1/2. This fold covers 1/3 of remaining visible paper. Grasp center where folds meet. Create 4 ridge...

How To: Make Indian style tandoori roti (wheat bread)

Tandoori roti is another type of Indian unleavened bread which is usually made in a clay oven called a tandoor and commonly enjoyed with chicken, lamb, mutton or other non-vegetarian dishes. Vegetarians out there, don’t worry. It tastes just as fabulous with vegetarian curry dishes as well! Watch this how-to video to and try this easy to make at home recipe and method. You won’t need to run out and buy a tandoor!

How To: Make Indian style gobi manchurian

Dry gobi manchurian, aka Cauliflower manchurian, is a tantalizing Indian Chinese appetizer and very different from the gravy version. The cauliflower has a crispy coating and is tossed with a mouth-watering spicy sauce. It can be picked up with a toothpick or fork and enjoyed with cocktails or before a meal. Watch this how-to video and try this absolutely delicious recipe!

How To: Take apart an Xbox 360 wireless controller for repair

In this tutorial, we learn how to take apart an Xbox 360 wireless controller for repair. First, grab your controller and grab a few different sizes of screwdrivers. After this, turn your controller over and start to remove all the different screws from their spots and place them onto a table where they won't fall. now, take the bar code off and take off the final screw that is on the inside. After this, you will be able to take apart your controller and fix whatever issue you are having with ...

How To: Make your own donuts from biscuit dough

In this video tutorial, viewers learn how to make donuts from biscuit dough. The biscuit dough should be jumbo sized. Then make a hole in the center of the dough. To make a hole, simple place a circular object into the center of the dough and press down on it to cut the hole out. Now fry the dough, making sure that the oil is hot enough. Make sure not to over fry the dough. Then add 1/4 cup milk and mix it with the dough. Now mix and melt a bar of chocolate. Now dip the donuts into the chocol...

How To: Make meatballs using a meat grinder

In this tutorial, we learn how to make meatballs using a meat grinder. To begin, choose three of your favorite types of meat, around six pounds is enough. Trim the meat up and take any bones out. Trim most of the fat off, but you can leave some in, because it will cook out. After this, push all the meat into a meat grinder and place into a large mixing bowl. Next, add in Romano cheese and bread crumbs, then mix together thoroughly. After this, add in an egg and salt and pepper to taste. Mix t...

How To: Sweat pipes for an air-tight connection

In this video tutorial, viewers will learn how to sweat pipes. The materials required for sauntering the sweat pipes are: M-APP gas, gauge, solder, solder paste, pipe cutter, brillow and copper pipes. Begin by cutting the copper pipe to a desired size. Then brush some plumber flux onto the copper pipe and hold it in place with a clamp. Now use the M-APP gas to move the flame around the pipe to allow it to suck in the solder. This video will benefit those viewers who are interested in plumbing...

How To: Makea princess cupcake castle

Celebration Shoppe shows viewers how to make a Princess cupcake castle! First, you will need to make normal cupcakes - your choice of flavor - an top them with pink icing. Next, you need a stand that is three tiers in descreasing size. Next, you should embellish them and apply to the cake plate. Next, you can add in ribbon and on the top add in little castle tops and towers. You can also add in ribbons tied around each cupcake. Next, you can take sugar cones and decorate the top tier with the...

How To: Take a screenshot in Windows with Print Screen & Paint

In this video, we learn how to take a screen shot without using special tools. First, pull up the page you want to take a screen shot of. Once you have that page up, press the "Alt" and "Prnt Scrn" buttons on your computer keyboard. After you have done this, open up the "Paint" program on your computer and find the toolbar at the top. Find the button that says "edit" then hit "paste". After you do this, your page will show up in paint. You can crop it and edit it to the size you need, or leav...

How To: Reycle plastic into easy to make shrink art

The video is part of the awesome web show and this video is about recycling of plastic into beautiful shapes-Shrinky Dinks .At the beginning of the video an old plastic container top is taken and using scissors is cut into a circular shape. The scratchy surface of the circular plastic is coated with one color and on the other side some designs are drawn using another color. This piece of plastic is kept in a microwave oven which is preheated to 350 degrees to shrink it to a smaller size and t...

How To: Know what the numbers on a golf ball means

In this video Jay Golden talks about what the numbers on a golf ball mean. The different numbers do not mean that the ball is a different weight or size or dimple pattern. The major purpose for different numbered balls is so that you know your ball when you are playing golf. If two players have the same numbered ball normally a dot is put on one of the balls with a magic marker so that you can know which ball belongs to each player. If you hit the wrong ball it's a two stroke penalty. If you ...

How To: Recover lost Mac data with the R-Studio application

In this video tutorial, viewers learn how to recover lost data using R-Studio. Begin by running R-Studio. Locate the drive that you want to recover. Right click it and select scan. The scan can take up to 45 minutes depending on the size of the drive. Once its finished, there will be a list of hard drives in which data is stored. Green, black, and orange will recover with no problems. Red is not recoverable. Double click on the wanted drive and wait for it to load. You can now see all the dat...

How To: Play KenKen

It’s a game, it involves numbers, it’s fun, it’s KenKen! Understanding the goals and rules of this fun, numbers puzzle will give you the skills you need to win. Have fun working your brain and passing the time with KenKen.

How To: Make bubbles from a CD

Mr. G teaches us how to make bubbles from a CD in this episode of "Do Try This at Home". You will need: a CD, screwdriver, and lighter or candle. Procedure: Use the screwdriver to scrape the aluminum coating from the CD until you get a clear plastic (polycarbonate). Heat an area underneath the CD slowly until the plastic is melted. Blow on the heated portion of the CD until you get a bubble. You may detach the bubble or leave the it on the CD. Heat and blow other portions of the CD to get new...

How To: Prepare and a butternut squash for cooking

Learn to prepare butternut squash for cooking! It is a nutrient rich, low calorie food. When you buy your squash, make sure its free of blemishes and looks healthy. This is very important. At home, feel free to store it however you like, but it does fine in room temperature, non humid places. Lay it down on its side and slice off the ends, this will make it easier to. Peel! Peel using either a knife or a vegetable peeler, as this will give you a nice smooth surface. Slice the squash in half l...

How To: Draw a cartoon tiger

Are you having trouble with your animal drawings? Doodlekat1 shows us how to draw a cute cartoon tiger easily! You will need: blank piece of paper marker or pencil. For the head: Draw a big semi-circle and a small circle in the middle. Connect them using little curves then add the ears. For the nose: Draw a triangle on the top of the small circle then add the mouth, three dots and some whiskers. Draw two big shaded eyes. Draw stripes of varying sizes at the top and the sides of the head. Add ...

How To: Make an easy dreamcatcher

Arts and Crafts at Camp Watonka demonstrates how to make an easy dream catcher. Tools for the dream catcher include a ring, wax string, leather strips, pony beads, feathers, scissors and craft glue. First, cut a medium-sized piece of string. Tie a knot on the ring. Wrap the string around the ring two or three times and pinch it. Then, move to a different part of the ring and repeat the technique a few times. Add pony beads and feathers to the project. Glue the leather strips all the way aroun...

How To: Make a Napoleon Dynamite Mii on Nintendo Wii

In this video we learn how to make a Mii on the Nintendo Wii console for the popular movie character Napoleon Dynamite. The first step is to select a male character for the Mii. The second step is to create the body of the Mii and make him about 20% on the skinny side. Next choose the hair/head style and choose the afro type on the third page. Next choose brown as the hair color. Next choose straight vertical lines for the eyes. Next choose big glasses for the eye glasses. The eyebrows should...

How To: Make raw sauerkraut with a food processor

In this tutorial, we learn how to make raw sauerkraut. First, peel away the first two or three layers, then cut it up in different size chunks and place into a juicer. When finished, press down leaves onto the bowl to get the water out completely. now, place baby raisins and press on top of the cabbage leaves. Now, place a cloth on top and let sit for 5-7 days in a cool and dry spot. Make sure to keep flies away while this is sitting. When finished, you will have sauerkraut that you made and ...

How To: Create a water garden arrangement

In this tutorial, we learn how to create a water garden arrangement. To start, have a box filled with foam and rocks, then place branches on the inside of the foam and rocks. Now, add in a few liatris branches at different sizes. Next, add in yellow daisies, green spider mums, foxtail ferns, ivy leaves, and any other plants and flowers you prefer. To give the arrangement a garden feel, make the plant out of order and make the plants and flowers at different levels and heights. Arrange the flo...

How To: Twist hair in two different ways

There are two basic ways to twist hair so that it lies on the scalp. One way to twist the hair is to section the hair into the desired size of segments. Use one hand to twist the hair with the thumb and forefinger while holding the hair down secure with the other hand. Another way to twist hair is to separate the section into two pieces. Twist one section over the other and pick up another piece while twisting the strand around again. This will feel similar to braiding, but with only two stra...

How To: Make Boston butt pot roast and gravy

In order to prepare this meal you will need you get a large Boston butt pork roast around seven pounds. In a small dish combine, one tablespoon of salt, half a teaspoon of black pepper, half a teaspoon of garlic powder, and a teaspoon of thyme. Mix the seasonings together and sprinkle it over the roast. After each side has an even coat of the seasoning, rub the seasoning into the meat with your hands. Preheat the oven 425 degrees and place the roast onto a roasting pan with the bottom side do...

How To: Make a huge rubber band ball

To make a rubber band ball you will need a lot of rubber bands, most likely a whole bag full. The more rubber bands you have, the better and bigger your rubber band ball will be. To start your rubber band ball you can tie a rubber band in a knot. Then put each rubber band in two and wrap them around the first rubber band. If you keep doing this until all of your rubber bands are gone then you will have a good rubber band ball. The size of the rubber band ball depends on the number of rubber b...

How To: Make Arabic coffee

To make Arabic coffee, first grind Arabic spices with a mortar and a pestle. Next, add the spices and the coffee to a single serving sized can. Pour water into the can and add a bit of granulated sugar. Stir the coffee, the spices, the sugar and the water together. Place the can over a flame and heat the coffee until it almost boils over. Spoon the foamy coffee mixture into a cup. Once the foam is gone from the coffee can, heat the remaining coffee again until it almost boils over. Pour the p...

How To: Make a rubber band ball using a bouncy ball shortcut

This video shows you how to make a rubber band ball. First, take a small bouncy ball as a basis, and wrap the first rubber band around it. The technique to do this is to loop the rubber band around the ball and pull it tight, then twist the rubber band and loop it around the ball again. Continue in this fashion until the rubber band is wrapped tightly around the ball. Take another rubber band and wrap it around the ball in the same manner as the first. Do this with as many rubber bands requir...

How To: Draw Mickey Mouse in MS Paint

Learn how to draw a Mickey mouse on your computer using MS Paint in simple steps. Use the oval tool and draw two medium size circles leaving some space between the other. Now draw a bigger circle by making its top ends meeting the other two circles. Draw two little circle inside the bigger circle for the eyes and draw another circle below the eyes for the nose. Make a curve joining the two eyes and draw its mouth below the nose as shown in the video. Finally draw some hair and give the colori...

How To: Create a spring spear trap

Kruder, from The Pathfinder's school, teaches you how to make a spring spear trap with almost all natural materials. This is a very dangerous trap so be warned and be very careful if you practice this. By using any springy tree (he uses a Maple), and a toggle tied to another tree, you can make a trip wire for any sized animal. Add a spear to make it more effective. You'll learn everything from the materials to construction in this video.