Inspirere Hold Search Results

How To: Force eject a disk from a Mac

In this video tutorial, viewers learn how to force eject a CD/DVD from a Mac computer. There are two ways to force eject the CD/DVD. The first option is to begin by turning off the computer. Then turn it on again. Right click while you are turning on until the disc ejects and the login screen appears. You can also restart the computer. While restarting, hold down the option button until startup disk shows up on the screen. Then let go op option and hit eject. This video will benefit those vie...

How To: Know how long it takes to lose abdominal fat

This video describes the ways people hold onto fat. There are three main types of bodies. There are naturally skinny, round with an easy time gaining weight and overly round with a hard time losing weight. Each person is different but in certain body groups there is an easier time to maintain a lean appearance. Fat cells in your body also play a part in you getting fat and staying thin. It is said that all of your fat cells have been fully grown in your puberty years. There are some new studi...

How To: Build your side ab muscles for a six pack

In this video tutorial, viewers learn how to perform the best six pack abs exercise. In this video, viewers will be performing the plank and side plank exercises. Users should be straight and have hips pushed down. Pull the belly button up, squeeze the pelvic muscle high, point the chin down and squeeze in stomach. Hold this position for about 30 seconds. On the side plank go in a straight position, squeeze, pulse up and feel the oblique muscle. This video will benefit those viewers who want ...

How To: Read a map and use a compass

Watch as "4-H Forestry Facts" shows you how to survive in a forest or any other environment using a map and a compass. When holding a compass the needle will always point to the direction of north because of the poles of the Earth and the magnetic pull of the compass. After knowing which direction is North you can then figure out what direction is South, East and West. Then looking at the map you can see where it is you need to go. Watch the rest of the video to learn all the tricks and never...

How To: Use navigation & selection techniques in MS Word 2007

User mel_bone teaches you how to use navigation and selection techniques in Microsoft Word 2007. You will notice in the bottom right corner of the main window a slider. This controls the zoom. You can thus increase the page size or decrease it, as you need. When you have a document that has more than one page, you can go to the end of the document by pressing ctrl+end. Ctrl+home brings you to the start of the document. Clicking and holding the mouse button pressed on the navigation bar lets y...

How To: Use drag & drop in MS Word 2007

In this video the instructor shows how to use the drag-and-drop feature in Microsoft Word 2007. You can use drag-and-drop to copy and move information within the Word document. This is particularly useful when you want to move and copy information within one page. However, if you want to move information between different pages, use the normal copy-paste feature. If you want to move any information, first highlight and select the data. Now click and hold down the mouse button in the middle of...

How To: Right click on a Mac using the Apple mouse

Jonathan demonstrates how to right click on a Mac using the Apple mouse. There is a short cut: holding down control while left clicking to make the right click menu come up. The Mighty Mouse has a right click function but you have to enable it. To enable this feature, go to system preferences and click on mouse and keyboard. The mouse and keyboard menu will now open up. Locate the right drop down menu. The default is set to "Primary Button" so you will need to change that to the "Secondary Bu...

How To: Take apart the Xbox 360 and the console disc drive

Disconnect all wires from XBox. Hold power button for 2 minutes to clear electric charges from XBox. Remove hard drives by pulling hard drive button and just straight up. Remove faceplate in XBox by gripping on the sides. Remove the bottom and top panels. Separate them. You'll hear a pop when they release. Complete separation by unhooking the tabs with your fingernail. Use a Tore T10 star screwdriver to remove the 6 screws in the video. You don't need to remove any other screws. Set them asid...

How To: Easily crack a coconut

You will need a butcher's knife to crack the coconut. Notice the coconut has a seam in between the two "eyes" of the coconut. Hold it over a bowl with the seam running lengthwise along your palm. One tip should be facing you, and the other should face away from you. Take the knife in and strike the center of the coconut several times, while turning the coconut in your hand. It coconut will crack open neatly. If you follow the steps in this video, you should be able to crack a coconut easily.

How To: Peel a mango

Mangoes are not easy to peel. This technique shows how to preserve them in the freezer. Mangoes start off green and become purple and then finally orange. When they are brilliant colored, it's time to pick them or buy them. They have a clear almost sticky juice when they're ready. The central stone is flat and round. It's quite hard to remove. Use a thin flexible life to follow the contour of the mango. Lie it down on one of its flat sides. Then peel it in small sections, holding it still wit...

How To: Fix a computer that doesn't power up or has no power

This quick video tutorial will show you how to fix a computer that has no power. If your computer won't power up, follow these steps: Check the back of the computer to make sure the power cord is plugged in, and check the other end of the cable to make sure it's plugged into your power strip, and that the power strip is turned on. Try plugging your computer directly into the wall. Check the switch at the back of your computer to see if it is in the 'off' position. Unplug the power cord. Hold ...

How To: Ask a girl out from a girl's point of view

In this short video tutorial Jet and Star from The Wing Girls give advice on finding out if the girl you've just met likes you as a friend or more than just a friend. They advise you on how to ask the girl to "hang out", keeping it "chill" and casual. The video then deals with subjects like how to "get her alone", and "holding her hand". The video itself is short but entertaining, and the girls manage to explain their approach to the subject in an entertaining and casual way.

How To: Make the perfect kir royal

This video shows you how to make a perfect Kir Royal. A drink for anytime of the day. You will need a flute glass(classic champagne glass), Creme De Cassis or Royal Chambord liqueur, sparkling wine or champagne(Spanish Cava champagne which is cheaper and better). Open the champagne by removing the foil, open the screw, hold the cork and twist the bottle until cork comes out. Put 1 ounce of Royal Cchambord in the champagne glass. Tilt the glass and pour the champagne into the glass leaving roo...

How To: Make sparks with steel wool, wire, and a battery

Learn how to make sparks with steel wool wire and a battery in simple steps. You will need thin steel wool, string wire, a battery with two terminals on top and scissors . First measure a meter of string wire and cut it out using the scissors. Now wrap the string wire around the steel wool exactly in the middle. Rub the battery terminals on the wool to check whether it sparks. Now get outside in a safe place and ignite the steel wool by rubbing the battery. Spin the steel wool by holding the ...

How To: Drywall an archway

Watch this video learn how to drywall an archway in five quick and easy steps. Measure and cut drywall to fit your arched opening. Score the back of your drywall to help it bend to your archway. Place drywall into opening. Tack or nail to hold the drywall in place. Screw drywall into arch. Mark and cut the drywall for the face of the archway. Place drywall over archway and use as a template to cut the drywall. Nail/Screw drywall to the face of the archway. It is now ready for corner bead, tap...

How To: Make a square origami paper box

This instructor teaches you how to make a square origami paper box or container with simple instructions. The video gives you beginning skills in the Japanese art of paper folding. The folds demonstrated are well demonstrated and simple to perform. Also offered are tips to make the creasing of your hand folding more precise with ease. In less than three minutes you can learn to make a useful container to hold all your odds and ends by using a simple sheet of paper. Make a set for yourself or ...

How To: Easily make clarified butter

Learn how to easily make clarified butter at your home in simple steps from Jason Hill. First heat a pan and add some thick butter on it. Let the butter stay on the for sometime until it is completely melted. Now start skimming the surface of the melted butter little by little using a spoon. You will get the clarified butter when its skimmed off completely. You can use it many purposes as it hold a lot heat.

How To: Force restore an iPhone or iPod Touch

In this video you will learn how to force restore your iPod Touch or iPhone. If your force restart does not work, follow these steps to restore your iPod Touch: Press the button at the top and the button at the front at the same time, as if you are going to force restart. Hold both buttons in until your device shuts off. When the Apple logo appears, let go of the top button. Now plug it into iTunes and click the restore button. Your device is now clean.

How To: Juggle 3 clubs at once for beginners

The creative minds at Soulstyle show you how to juggle three clubs at once with some excellent tips to help get you started. Start by tossing one club in the air and catching it in the correct spot before you more forward into juggling. Once you've got that down pat, toss two clubs back and forth, in the shape of an "X" until you are completely comfortable with that. Keep your eyes focused on the highest point of the "X" and avoid the temptation to watch your hands. When you've mastered two, ...

How To: Repair a shoe with Shoe Goo adhesive

Got holes in your shoes? Don't throw them away. Learn from one wise skater how to fix them up and get back on your feet. Get your hands on some Shoe Goo, which can be purchased at any sporting goods store. Grab a tissue or napkin and use it to plug the hole in your shoe. This will act as the base upon which you'll place the Shoe Goo. Once it's in place, coat the hole completely with Shoe Goo. Use gloves if you prefer, but it washes off your hands easily. Cover the torn area sufficiently that ...

How To: Build a superfast paper airplane

Follow this video to learn how to make your own paper airplane that can really fly. Acquire a sheet of A4 paper and fold it in half. Afterwards fold two of the edges towards the center line set out when folding. These should be folded in the form of two triangles. After doing so fold them downwards, towards the center line lower down. Fold another two triangles towards the center, one from each side. At this point a small edge will be formed at the tip of the two folds. Simply fold it upwards...

How To: Use printer paper to make a paper airplane

Learn how to use printer paper to make a paper airplane. Find a piece of paper shaped like a rectangle. A sheet of computer printing paper or school notebook paper is a good size and weight. Lay the paper on a table with one of the long edges closest to you. Fold the paper in half lengthwise. When the two edges match up, use your thumbs to make a sharp crease along the fold. Take the upper left corner of the top layer of paper and fold it diagonally down toward the first crease you made. When...

How To: Prepare broccoli

This is a quick and easy way to prepare healthy broccoli. On your chopping board, lay broccoli crowns upside down. Cut around the broccoli in its flower heads using a knife holding up the stem/stalk. (Set aside flower heads). Cut out the stem to get the edible white part of the stalk. (It's your option to include this with the flower heads.) Use this on your favorite dish.

How To: Shoot lightening in the daytime

This video shows you how to photograph lightning in the daytime. Set the ISO to 100.The aperture set at f32 and set for half of a second. Meter should be showing averaged. Photograph in the manual mode so that the setting won't change between photographs. Manually focus lens to infinity so you won't have to wait for the focus to lock on. A remote shutter to just hit the button. Be safe and keep camera safe when taking lightning photographs. Don’t get under trees. When lightning starts strikin...

How To: Make a micro terrarium

Learn how to make a micro terrarium which usually holds 1 small plant in simple steps. You can use any type of container like a light bulb, yogurt container, baby fruit jar, spice container, honey jar, etc. Now select your container and add some soil in it. Place the seeds if you are using them or plant the miniature sinningia in the soil. Use a copper wire to tamper down the soil nicely and close the container lid.

How To: Remove the fuzzy center of a fresh artichoke

See a quick and easy presentation on how to remove the fuzzy center of a freshly cooked artichoke. After you have cooked the artichoke, spread the petals of the artichoke to show the center petals. Take hold of the center petals with your fingers and then twist this to remove the choke. Take a spoon and scoop out the fuzzy center. You can use the middle of the cooked artichoke to serve a meal and the artichoke will add another dimension of flavor.

How To: Take a screenshot on an Apple Macintosh

This video teaches the secrets of taking a screenshot on an Apple Macintosh in simple steps. First open any colorful web page of your choice to take the screenshot. Now hold down the Command, Shift and 3 keys together at a time to take the screenshot. Now close or minimize the web page and double-click the image found on your desktop to open it. You can zoom in or out, send via email, save it and do much more with your screen shot.

How To: Defend against a left hook in boxing

In this video tutorial, viewers learn how to defend against a left hook in boxing. To defend against a left hook, users should be in a guard position with arms held high. There are several ways to defend against a left hook. Some ways in guard position include: turn into the shot, slightly move right arm outward, weave or bob under shots and avoid moving to the right side. This video will benefit those viewers who are interested in boxing and learning combat skills.

How To: "Thread the needle" in Jiu Jitsu (arm bind and choke)

Let’s try to thread the needle, as in give a choke hole. First get your opponent down on the mat facing upwards and sit in the mountain position. Hold your opponent's left hand with yours around his head to block him/her. Get your right hand through your opponent's left hand (needle in the hole) and push your chest towards the ground. This will put pressure on your opponent. It will help in your attack as well as defense techniques.

How To: Use text fields in FileMaker Pro 10

If your into data based business,then this one's for you. Text field's are very much important while making a data based solution in FileMaker Pro 10.You can go to file menu>manage>database and there is the field's tab. Text field is used for storing text and no other such use. Text field's can hold up to 2GB of information. It can help to store raw data and formatting information, i.e., color,point size as well as type face.

How To: Do ceramic detail on trimming & sealing

Simon Leach teaches you how to do ceramic trimming and sealing. You wet the top of the pot and place it on the wheel. You push down on the bottom, sealed side, when the wheel is spinning. You use the trim tool to cut into the base side. You do this at an angle and make sure you hold the trim tool like a stake knife, not like a pencil. You empty out the leg until you are pleased with it. You round off any sharp corners and you have to put the last piece, the seal. On the bottom you take a piec...

How To: Make altered paper jewelry

Looking for a stylish new look without the price tag? This video tutorial will teach you how to make jewelry on a budget, with your main material being none other than paper and plastic tubing! This step by step instructional video by craftside shows you how to recycle old card stock, paper, and cardboard to make a holder for a plastic tube necklace. First they show you how to make a "matchbook" holder by just folding the card stock around the cardboard that create a little card that will hol...

How To: Remove objects from photos using paint.net

In this video from solvingtime we learn how to remove objects from photos using Paint. To get this program go to to install it. He uses the clone stamp tool to remove things. First he zooms in on the object he wants to remove using the magnifying glass. Then click the stamp which will switch to the clone stamp tool. Use the bracket keys near the letter P on the keyboard to adjust brush size. Then while holding the control key click once on an area near the object you wa...

How To: Do alternate nostril breathing in yoga

Yoga teacher Tara Stiles gives an informative video tutorial on how to do alternate nostril breathing in yoga. Tara warns that some first-timers might find this particular exercise a bit weird, but once they get a hang of it, it can be a boon for kick-starting one's day and relaxing one's mind and body. Then, she demonstrates the simple steps of breathing in and out, alternating the closing and opening of the nostrils. In closing, Tara cautioned that people who experience dizziness in the beg...

How To: Make an good looking paper flower

This video shows the method to make a good looking paper flower. The basic thing needed for performing this task is a rectangular sheet of paper. The paper is first folded to make a square piece of paper. The rectangular piece left is then cut out. This rectangular piece is folded across its length to make the stick for holding the flower. The square piece of paper is folded across its diagonals and its sides so that various creases are formed on it. Then a series of folds are made on the squ...

How To: Take apart a 3rd generation iPod

This video from Powerbook Medic teaches us how to take apart a 3rd generation iPod. First step is to use a putty knife or a flat head screwdriver to break apart the two pieces. After that remove the headphone cable and set the bottom pan aside. After this, you disconnect the hard drive, and battery cable form the board. Then use a T6 screwdriver to unscrew the T6 screws which are holding the board in place. Then take the last cable away. Now you can take the board out as well as the battery. ...

How To: Use the keyless remote on a 2010 Toyota 4Runner

This video tutorial shows you the ins and outs of the keyless remote system on the new 2010 Toyota 4Runner. One of the remote controls that the system offer is to lock and unlock your doors. The locking will be signaled by the lights flashing. The unlock button if hit once will unlock your front doors and show two flashes of the lights. If you hit the unlock button twice within three seconds the lights will flash four times and it will unlock all of your doors. Finally it is installed with a ...

How To: Restore iPod Touch from lockout

To restore an iPod Touch from lockout or forgetting a password, pull up iTunes on whatever computer you are using. Plug the USB cord into the iPod touch and plug the USB cord into the computer. The iPod will say "locked out" or "access pass code" and the computer will says that it needs to be synched up to the original program. Hold down the top button and home button at the same time. A message will pop up. Ignore it and let the iPod turn off. Take your finger off the top button and leave yo...

How To: Test a vehicle alternator with a standard multimeter

Richpin demonstrates how to test an alternator with a standard multimeter. First make sure that the vehicle's battery is fully charged. Take the negative lead of the multimeter and put it on the negative post of the battery. Place the positive lead of the meter on the positive lead of the battery. Set the meter to DC voltage using the 20 scale and read the display to ensure the battery is fully charged. Next start up the vehicle and see what the alternator is producing. The display should now...