Joint Capabilities Search Results

How To: Measure the right sleeve for a custom male suit

The Bespoke Center shows how to measure the right sleeve for a custom made men's suit. The Center recommends using a tape measure of course to do your measuring. These recommendations are easy and work well for custom made DIY projects. For this project the man will need to wear a shirt. Measure from where the seam on the shoulder meets and to the base of your thumb located at the wrist joint. The tailor also recommends that you do this so that you can decide where you want the sleeve to end....

How To: Make a fat PSP Pandora battery

This is a video games tutorial where you will learn how to make a fat PSP Pandora battery. First you will nee a battery, a pin and a knife. Put the knife blade along the joint of the battery and slide it up and down to crack open the battery cover. Then pry open the battery case and remove the battery carefully. Now you need to break of a pin on the top end of the battery. You have to be very careful while doing this. See how it is done in the video. then you put the battery back in the case ...

How To: Use copper push-fit fittings to connect piping

Follow this video to learn how to use copper push-fit fittings to connect piping. 1. Sometimes we connect pipes by means of push-fit fittings which are not very appealing to look at since they are of a different color and material and so do not match with the pipe. However a good alternative is to choose copper push-fit fittings rather than plastic ones. Copper push-fit fittings would be similar to the pipe itself. 2. Open the pipe and ensure that it is clean before fixing the fitting by simp...

How To: Measure your jacket length

Alazzo Clothing teaches the viewer how to measure their jacket length. You'll need a flexible measuring tape first. First, put your measuring tape at the point where the shoulder and neck seams meet. From this point, you will measure down to the length desired. Measure down the front of the chest and not the back. The length you will measure will end right around where your thumb joint is. Record this amount in inches and this is your jacket length! Take this number in and get jackets tailore...

How To: Make fabric dolls

You start off with a printed design on your doll. Use regular paper, but you have to print the doll in individual pieces - body, hands, legs, head. You stick those on the front of hard materials like thick card stock or some thick fabric. Now you can putt the doll together and make adjustments. You put the doll together by using small thumb tacks. It's even better if you have ones that have a rhinestone on them. Once you've done the joints, you can also add a little tutu or some fairy wings. ...

How To: Make a Yoshimoto cube

FK describes how to make a Yoshimoto cube. First, print out the template. Then, trim the paper with scissors along the perimeter and glue the edges into a 3D pyramid. Repeat these steps until you have 48 cubes. Fix 3 pyramids together 16 times. Arrange pyramids in groups. Repeat 2 times and color 8 of the pyramids. Place adhesive on the joints of the cubes. Arrange the pyramid groups into a cube. Now, you can perform neat tricks with the cube, like changing the cube from white to colored with...

How To: Draw an anime or manga female in motion

This video goes back to basics, using regular pencil, pen and colored pencils to create a manga female figure. He begins by drawing basic lines and shapes of the torso with pencil, then adding legs, arms and marking the joints. He adds detail to the body and fills in the shapes of the muscles. He then adds the head shape and fills in the facial details and hair before adding detail to the hands and fingers. He continues with the clothing, before going over all the lines with a black ink pen. ...

How To: Get taller by stretching

This short video instructs you on how to grow taller using only stretching. If you follow these few simple steps you should grow a little taller and straighten out your spine all at the same time. Using only your arms and legs, stretch your body to it's limits then do a 60 second air bicycle ride. Next slowly use head rotations to loosen your neck joints. You should practice doing this everyday in the morning and at night.

How To: Remove backer board from a shower stall

Mark Donovan is remodeling a ceramic tile shower, and shows how to remove the old backer board. First remove the old screws, starting at the bottom of each board and working your way up (leave a few screws so the board doesn't fall). Sometimes screws may be hiding under old mortar. Score the joint between the top board and the ceiling with a utility knife to prevent ceiling damage. Use a pry bar to gently remove the old backer board, being watchful for pipes. Remove the last screws, then the ...

How To: Refill your RC truck shocks with shock oil

To refill your RC truck shocks the first step is to remove the shock with an alarm key located at the bottom of the shock. The next step is to pull the spring back and remove the lower joint and spring then remove the cap screw and be careful, their might be some oil still in there. Fill all the way up to the top if you want stiffer shocks and pump the shocks a few times to eliminate bubbles in the oil. Then reassemble and check to make sure it meets your needs and you are done.

How To: Solder copper pipes the right way

Soldering is a handy skill to have at your disposal. You probably don't want to jump right into it without practice on some scraps, but you can learn how to solder copper pipes together. You will need to make sure that all of the pieces you are working with are clean and dry first. You then need to apply flux to the end piece and slide the joint piece onto the pipe and hold it in place. Now you are ready to solder your pipes. This video will show you everything you need to know.

How To: Use compression fittings on copper pipe

Copper pipe is perhaps the most versatile of all piping types in that you can use virtually any fitting with it. Copper pipe, however, is not particularly flexible, which can make it a little unwieldy to work with. Simplify your copper piping projects by using compression fittings. This home plumbing video tutorial shows you how. For detailed, step-by-step instructions on using compression joints in your copper plumbing projects, take a look.

How To: Solder a wire onto a switch when building circuits

This is an instructional video featuring Doug Prime, founder of the Future Engineers Center at the University of Massachusetts Lowell. Strip the wire and make sure the wire is tied on tightly before soldering. Don't drip balls of solder. Make sure the tip is clean. Then hold it on the joint to be soldered for 4 seconds. Then poke the solder on the surface and it will melt with the heat.

How To: Use the AJAX Control Toolkit for ASP.NET

The ASP.NET AJAX Control Toolkit is a shared source project built on top of the Microsoft ASP.NET AJAX framework. It is a joint effort between Microsoft and the ASP.NET AJAX community that provides a powerful infrastructure to write reusable, customizable and extensible ASP.NET AJAX extenders and controls, as well as a rich array of controls that can be used out of the box to create an interactive Web experience. This video tutorial will get you started using it. Take a look.

How To: Do a Muay Thai kickboxing foot jab to leg sweep drill

Muay Thai, a form of kickboxing and the national sport of Thailand, is an intense martial art that uses not just all the limbs, but joints, as possible weapons against an opponent. This how-to video clarifies some basic Muay Thai kickboxing moves, with step-by-step instructions accompanied with demonstrations shown from multiple angles. Whether you're looking to work on your technique, or pick up a new sport, this video tutorial will help you improve your Muay Thai skills. Follow along and le...

How To: Do a Muay Thai kickboxing counter to kick drill

Muay Thai, a form of kickboxing and the national sport of Thailand, is an intense martial art that uses not just all the limbs, but joints, as possible weapons against an opponent. This how-to video clarifies some basic Muay Thai kickboxing moves, with step-by-step instructions accompanied with demonstrations shown from multiple angles. Whether you're looking to work on your technique, or pick up a new sport, this video tutorial will help you improve your Muay Thai skills. Follow along and le...

How To: Do Muay Thai kickboxing drills

Muay Thai, a form of kickboxing and the national sport of Thailand, is an intense martial art that uses not just all the limbs, but joints, as possible weapons against an opponent. This how-to video clarifies some basic Muay Thai kickboxing moves, with step-by-step instructions accompanied with demonstrations shown from multiple angles. Whether you're looking to work on your technique, or pick up a new sport, this video tutorial will help you improve your Muay Thai skills. Follow along and le...

How To: Massage the shoulder joint

The shoulder is an area of the body that carries a lot of tension. It is very important to check with your person and make sure that they do not have any range of motion issues. Get expert tips and advice on massage and other treatments in this how-to video.

How To: Stretch deltoid muscles with sports massage

The deltoids are the muscles near and above your shoulders. It goes on the front of the arm and it goes on the back of the arm to the shoulder. It gets really tight sometimes. One thing you want to find out from your person before you are doing a stretch on them on any part of the body is to make sure that they don't have any range of motion issues or any dislocations of the joint. Get expert tips and advice on massage and other treatments in this how-to video.

How To: Make a stationery box

This is two part instructional videos demonstrates how to make a stationery box. This box holds standard size cards, 3x3 cards, gift tags, and more. You need to start with a 12" by 12" sqaure of cardstock. Use double stick tape for the key joints. You can decorate your box with store bought cutouts or use recycled paper and ribbons. Good luck!

How To: Create an oak blanket chest

in this 3 part woodworking tutorial, John W. Nixon from Eagle Lake Woodworking demonstrates how to build a classic oak blanket chest. This oak blanket chest features dovetailed construction, exposed spline joints, an arts and crafts inspired style, and replica hand-hammered hardware. Watch this how to video and you will be able to make an oak blanket chest in no time at all

How To: Rip and burn CDs in SONAR 7

You may already know about SONAR 7's capabilities for music and audio editing, but did you know how can also make CD's right in SONAR 7? SONAR 7 now includes integrated CD ripping and burning functionality. See how to import, rip and burn CDs in SONAR 7 in this video tutorial.

How To: Readjust microFollowFocus gear if too loose

This instructional cinematography video provides troubleshooting alternatives to adjusting the focus gear on a Redrock microFollowFocus should it become too loose. There are several adjustment capabilities built into the Redrock microFollowFocus and can be tightened by watching this video. This instructional video is interesting for cinematography aficionados.

How To: Carve a raw chicken for dinner and save money

Gwen Schoen and Paul Carras share with you in this video how simple it is to save money by carving a whole raw chicken. You can save your pockets an average of 20 – 30%! First take out any insides; this is usually the neck, heart and liver when included. Lay the chicken on its back and start with the wings. Break the skin with a boning knife and pull the wing away from the body until the socket pulls out. Finish the incision where the socket meets and repeat on the other side. Then you’ll...