Knot Search Results

How To: Tie the Rising Sun decorative knot

In this tutorial, we learn how to tie the rising sun decorative knot. First, loop your string on the left side, then pull the right side over the top. Now, bring the bottom of the right side over and place the end into the first loop going over the other string. Next, remove the string from the last loop it was in, then bring the right over to the right loop and push through to the bottom. Next, bring the right string over to the left side and thread through the left loop closest to it. Next,...

How To: Tie the lambda knot using 450 nylon paracord

Whether you're doing it for decoration or just for fun, tying certain knots can be a difficult task for any person. It's a difficult hobby that most people could not stand to perform since it requires time and patience. Well if you're looking for help, this tutorial might be of some assistance. In the video, you'll find out how to take 450 nylon paracord and transform it into a lambda knot. Once complete it should look like a clover. So good luck and enjoy!

How To: Tie the decorative Panel Knot

The Panel Knot can be used for a number of different occasions. These knots are a great decoration piece and can be done with different styles and colors of rope to get a splash of life in your home. These knots can also be used as an accessory to any outfit. All you need is a piece of sturdy rope, your hand, and about 3 minutes to learn this great trade. This can also be a great activity for your family to enjoy making together.

How To: Tie a left half knot spiral for hemp jewelry

In this video, we learn how to tie a left half knot spiral for hemp jewelry. First, get two bead carriers in the center and have one strand in each hand. Then, take the left hand and place it over the bead carrier. Then, take the right hand and go over the cross section. Tie these up to the top loop tightly and then repeat doing this. This will make the spiral shape once you have created enough of the knots. As you are working it, you will have to spin it a bit in order to keep it curving rig...

Make friendship bracelets: Double chain knot

Friendship bracelets are easy to make, and show your friends that you care. Not everybody wants to show off their friendship to everyone, but if you do, this video tutorial will show you how to make a friendship bracelet, specifically a double chain knot friendship bracelet. It's really simple and an easy bracelet to make.

How To: Use the common rope seizing knot

Rope seizing is a technique that is used when two things need to be held together with rope, like two pieces of timber for example. This video from ITS Tactical demonstrates how to use some cord to perform rope seizing on a big, heavy rope so that you can use it to suspend an object or perform other heavy rope-using tasks.

How To: Tie a rising sun knot

In this beautifully crafted video by Tiat presents the keyhole weave method of tying the rising sun. Grab about a yard of smooth decorative twine and you are ready to follow along. You will end up tying both the double coin and the ring of coin knots to make create the rising sun. But, fear not, the demonstration is clear and simple to follow.

How To: Tie an Anchor Hitch / Bucket Hitch knot

Learn how to tie an Anchor Hitch (also known as a Bucket Hitch) - A very secure means of attaching a rope to an anchor or any other object that you can't afford to loose (like a bucket down a well, I suppose - thus the alternate name). I actually do use this hitch for temporary anchor attachment (preferring to permanently splice instead) as well as for my bucket lanyards when washing down my boat's deck.

How To: Tie cylinder, mat and ball Turk's head knots

In this Disaster Preparation video tutorial you will learn how to tie cylinder, mat and ball Turk's head knots. To tie the cylinder, first tie the double coin knot as shown in the video. Then put it around a staff and make the 3-lead 4-bight Turk's Head. After you finish with this, tighten and trim the rope. To tie the 3L4B Turk's Head as a mat, remove the Turk's Head from the staff and follow the steps as shown in the video to make the mat. You can watch the video and learn how to tie the ball.

How To: Tie the decorative Basket Knot

Black Widow Mask In this video, the talented Angie teaches us to apply a Black Widow Mask for Halloween using make-up products that most women will already have in their collection. She uses detailed explanations and shows us exactly what she is doing and why, such as explaining that she's applying black eyeliner to camouflage the false eyelashes she will later be applying. Her application is easy to follow and results in a stunning finishing effect. By following her advice, you too can have ...

How To: Make a Military Bugle Cord Decorative Knot

Bugle cords are used as elaborate ornamental leashes on bugles and trumpets, but they are also used as snazzy ornamentation, called aiguillettes (a type of fourragère), on uniforms worn by certain members of the military. While you could buy one pre-made, you could also make one yourself. But this should not be confused with the infantry blue cord of the U.S. Army, which is another type of fourragère only with more elaborate knotting.

How To: Tie a hitch knot

Get free knot tying instructions for tying various types of hitches, including the half hitch, clove hitch, timber hitch, and bunt hitch in this free video series of knot tying directions.

How To: Tie a Double Windsor knot

If you want to know how to tie a Double Windsor knot, this video is for you. To tie a Double Windsor knot: Lift up the collar of your shirt. Place the tie around the back of your neck so that the wide end hangs down on the side of your dominant hand, a little more than twice as low as the thin end. Cross the wide end once over the front of the thin end and then around the back of the thin end a few inches below your neck. Slip the wide end through the back of the V-shape made by the knot, pul...

How To: Tie a slip knot

The slip knot, also called a running knot, is a very diverse knot. It's practical application ranges wildly from crochet and knitting to building a noose. The basic function of a slip knot is to create a flexible knot, with one end tied to the middle for greater mobility. Check out this how to video and learn how to tie a slip knot, because you never know when you might need it.

How To: Tie a square knot

Probably the first knot anyone ever learns after the granny and shoe tie, the square or reef knot is used to reef the sail but is prone to spill if asymmetrical force is applied to it. The square knot is also useful in that it forms it's own handle when the knot is completed. Watch this video knot-tying tutorial and learn how to tie a square knot.

How To: Tie a paragun knot for fishing

The Paragun Knot is also know as the uni knot. It is a great multi purpose knot that can be used with all line types but you will need more wraps with braided lines. The paragun knot is commonly used for attaching lures, swivels and hooks to the line. Watch this video knot-tying tutorial and learn how to tie a paragun knot for fishing.

How To: Tie a variety of knots when jewelry making

Christina, from Brightling Beads shows you how to tie a variety of knots in this video demonstration. This allows you to make a variety of jewelry, using various forms of knot tying. She will show you how to do an overhand knot, double hand knot, square knot, lariat knot, figure eight knot, sliding knot, and surgeon knot. This video makes it easy to do the knot tying, because it uses demonstrations that highlight the sting, and arrows that point to the area that you're working on.

How To: Tie four basic knots in jewelry design

To tie the overhand knot, make a loop and pass one end of the string through the loop and tighten by pulling both ends. To tie a double overhand knot, make a loop and pass one end of the string through the loop twice before pulling both ends to tighten the knot. To tie a surgeon's knot, take the left string and bring it over and around the right string twice. Then take the right string over and around the left string and pull both ends to tighten, leaving a complete loop of string below the k...

How To: Tie a figure eight knot

Ann and Matt of BoatUS teach boaters how to tie a figure eight or stopper knot. This is a very valuable knot for sailors to know. So check out this instructional knot tying video to improve your knot tying skills by learning how to tie a figure eight knot.

How To: Tie a slip bowline knot

A bowline knot can tighten up really easily, in such a way that it's a headache to get the rope untied. The slip bowline knot, however, has a pull tab that releases the knot when you're ready. Watch this video knot-tying tutorial and learn how to tie a slip bowline knot.

How To: Tie a double fisherman's knot or double overhand knot

The double fishermen's knot, as demonstrated in this how-to video, is a safe knot to secure to separate lengths of rope together, forming high-strength loops of cord. This makes it useful in rock-climbing and in search and rescue, especially as a backup for other knots. Check out this video survival training tutorial and learn how to tie a double fisherman's knot or double overhand knot.

How To: Tie a Bowline Knot

The bowline knot has a long history in sailing. The bowline, or bow line, knot was used to secure the sail in position toward the back of the ship, allowing the sail to capture the wind. Contemporarily, the bowline knot is used anytime a strong, looped knot is required. Watch this video survival training tutorial and learn how to tie a bowline knot.

How To: Tie a Portugese Bowline knot for sailing

The method demonstrated in this how-to video makes the Bowline knot quick and easy to tie. It is useful when you expect a blow and need to take a few turns around your winch to use as an additional hardpoint. In this case I am simulating a mast winch but the process can be used on a horizontally mounted winch as well. The secret is to form the bowline eye by capsizing an overhand knot. With the standing part in your left hand form a turn around the winch from top to bottom then cross the runn...

How To: Tie a strong water knot

Webbing is not only used in sports like rock climbing and caving, but it also comes in handy in camping and hiking. This video shows you how to tie two webbing ends together to make a loop that will not come off. A square knot does not work for webbing as it will slip through, therefore a water knot is used. Take 4 inches (10 cm) from one marked end and tie an overhand loop. Ensure that the webbing is not twisted. Slip the other end in the knot and trace the second end around the overhand kno...

How To: Tie a loop in the end of a rope with a bowline knot

This video describes and shows you how to tie a loop in the end of a rope with a bowline knot. A bowline knot is used in rigging by the ground rigger to create a point for the up rigger to have a point to pull up. This is how you create a bowline knot. First you must create a loop in the middle of the knot. With the free end, come up through the loop, then you go around the standing end of the rope and then you move it back through the loop. You pull the knot tight. That is how you create a b...

How To: Tie a Rorschach style decorative knot

The Tying It All Together team, or TIAT, explains the origin of the Rorschach knot and demonstrates the techniques in order to make the decorative knot. The Rorschach knot, associated with psychological testing of a subject's perception of inkblots can become a decorative knot with just one string. TIAT shows how to make "bunny ear" loops consecutively around one another while repeatedly matting and firming the string to keep it in place. TIAT also pauses periodically for the viewer to keep t...

How To: Tie a diamond ring knot

In this video tutorial, viewers learn how to tie the Diamond Knot. The diamond knot (or knife lanyard knot) is used as a decoration and joining knot in a cord with a loop. The Diamond Ring Knot is the fusion of an Overhand Knot and a tying technique called circling. The video contains a visual demonstration that allows viewers to have an example and easily follow along. This video will benefit those viewers who enjoy tying rope and to use knots to decorate.

How To: Tie a palomar knot while fishing

The Palomar Knot is both quick an easy to tie. It is also very strong and therefor a very popular fishing knot. The only downside is that the palomar knot uses a little more line than other similar fishing knots. So if used in a tapered leader it will shorten the line more quickly. But when the palomar knot is used with small lures, hooks and swivels it is superior to many other fishing knots for being quick, easy and very strong. Also the palomar is so simple that it can be tied in the dark....

How To: Tie a perfect "good luck" knot

In this knot-tying tutorial, we learn how to fasten a perfect "good luck" knot—a knot so named because it is said one requires quite a lot of luck to tie it properly. Not so, says video creator TyingItAllTogether. For all of the relevant details, and to get started tying this knot yourself, take a look.

How To: Tie a Blood Knot

Learn how to tie a Blood Knot - Used in sailing as a somewhat decorative stopper knot or on the business end of a Cat 'O Nine Tails (hence the Blood Knot's name). This knot can be used in sailing, boating, general use, camping and bondage.

How To: Tie the fool's cuff knot

Check out this instructional knot tying video that demonstrates how to tie the Fool's Cuff knot. This is an attachment cuff for a winch that spreads the weight evenly and does not tighten up. This knot is useful for attaching towing gear or blocks to the winches. Learn how to tie the Fool's Cuff knot with this tuturial video.

How To: Tie the sheepshank knot

Check out this instructional knot tying video that demonstrates how to tie the sheepshank knot. This type of knot is shortened to "tie out" a damaged section of rope or shorten a rope that has specialized ends. Learn how to tie the sheepshank knot with this video tutorial.

How To: Tie a bowline on the bight knot

The bowline on the bight knot, demonstrated in this how-to video, is tied by doubling the line. Create a clockwise eye then thread the bight through the loop and bend the bight back over the loop. Work the knot by pulling the standing part. Watch this video knot-tying tutorial and learn how to tie a bowline on the bight knot.