Longtime Board Search Results

How To: Program a $6 NodeMCU to Detect Wi-Fi Jamming Attacks in the Arduino IDE

Hackers and makers are often grouped under the same label. While hackers draw on computer science skills to write programs and find bugs, makers use electrical engineering to create hardware prototypes from microprocessor boards like the Arduino. We'll exercise both sets of skills to program a $6 NodeMCU to display the status of a Wi-Fi link via an LED, allowing us to monitor for jamming attacks.

How To: Make a mummy cake

In this video we learn how to make a mummy cake. We will need candy melts, eyeball mold, edible markers, a cake that has a crown on it, buttercream frosting, white fondant, sugar veil frosting, brown petal dust, a decorator brush, a cake round covered in foil, spatulas and knives. First you make the eyes. You can use the white candy melts to do this. You can use colored melts to make the irises. Put the melts in the mold and tap it to get the air out. Then put it in the fridge to harden the c...

How To: Tie up or truss a chicken for roasting

First of all keep the chicken under the running water and then pad it dry. Then you have to remove the neck, inner portions and the fat from the abdominal cavity. Now season the inside of the chicken with salt and pepper by standing it up inside the bowl. You can now add the desired spices. In this case you can use garlic cloves and lemon pieces. Now close the abdomen cavity and lay the chicken on the cutting board. Wedge the wing tips under the wings. Close the neck cavity by wrapping the sk...

How To: Perform a "frontside 270 on 270 off" on a snowboard

Snowboarding: Hit the Slopes With Style There was a time when simply riding a snowboard made you the extreme guy on the slopes. But now, with more people strapping on a board instead of skis, the stakes have been raised. Fortunately, we've lined up this video tutorial to keep you on the cutting edge. See how to perform a frontside "270 0n 270 off" on a snowboard.

How To: Perform a frontside 720 on a snowboard

Snowboarding: Hit the Slopes With Style There was a time when simply riding a snowboard made you the extreme guy on the slopes. But now, with more people strapping on a board instead of skis, the stakes have been raised. Fortunately, we've lined up this video tutorial to keep you on the cutting edge. See how to perform a frontside 720 on a snowboard.

How To: Make a wooden spear from scratch

Making a wooden spear requires a between medium and small thick stick, a rectangular piece of board, a hatchet and a wood clipper. The branches off the stick is removed and thrown away. The stick is clipped at the smaller end. It is then placed on the board and the larger end is cut off with the hatchet, while the stick rotates in a circular motion on the board to remove the outer skin. Closer attention is paid the shaping and cutting of the point of that larger side to get it in formation. T...

How To: Build a skateboard kicker ramp

This video starts out by showing the tools needed to build a skateboard kicker ramp: saw, drill, jigsaw, screwdriver, and wood. They then begin to cut the pieces of wood and screwing them together in the shape of a ramp. The instructions indicate to wet the ply board so it will bend to fit the shape of the ramp. They demonstrate how to measure the proper position of the board and screws using a string. They end by cutting the ply board at the proper length to allow the skateboard to life off ...

How To: Saw logs

Dawn your flannel and grow out your beard, it’s time to do some log cutting. Put good use to unwanted trees or extra lumber by making proper logs. It may seem self explanatory but the correct form will create uniform, crack free logs and keep you with all your fingers.

How To: Play and spot opening chess moves

Chess is a strategy and logical deduction game between two players that is enjoyed by children and adults alike, from park benches to convention halls across the world. Though the game of chess has taken many variations over its long history, today's form involves black and white teams orchestrated by players and has even entered the digital age, as games and tournaments are played online and via email. Using a square board composed of grids and smaller squares, the game pits a queen's army a...

How To: Balance on a rolla bolla

Watch this instructional video to learn how to balance on a rolla bolla. A rolla bolla has two parts, the roller and the board. To begin with place the roller on the ground, it helps if you use some kind of carpeted surface or something like that when you're beginning, that will help slow down the rolling and make it easier to balance. Next take the board and place it on top of the roller, with the roller about two-thirds of the way up the board. Place your left foot on the lower end of the r...

How To: Here's How You Can Make a Real Difference in the Aftermath of the Michael Brown & Eric Garner Grand Jury Decisions

In the aftermath of the unindicted police killings of Michael Brown and Eric Garner, we've been told that the system worked as intended. When our legal system's outcome is at conflict with what a majority of Americans believe is just, it's clear that some changes are needed. But what specifically needs to change? And what can an average citizen with a moral and just cause do to prevent these kinds of tragedies from repeating themselves again and again?

How To: Take apart your Xbox 360 wireless controller

You might want to take apart your Xbox for a variety of reasons. This video will walk you through the process of opening up your controller from unscrewing to the trick of lifting of the cover. You can see the different part where you might need to replace or upgrade things. Step 1: Start out by making sure that the XBox 360 controller is not turned on. The green lights around the XBox button should not be lit. Take off the battery pack located on the back of the XBox 360 controller. Step 2: ...

How To: Use a secret nail gun

The secret nail gun is used to nail timber floor boards to floor joists or on top of a sub floor construction. It shoots nails on a 45 degree angle through the tongue of the floor which is covered by the next board. No nail holes are required to be filled by the floor polisher. Watch this video tutorial for a demonstration on how to use a secret nail gun.

How To: Make a homemade butter pie crust

Chef John from Food Wishes has created this video tutorial on how to make a butter pie dough from scratch. First, chop up two sticks of unsalted butter and put it in the freezer. Next, weigh out you flour. It should be exactly 12 ounces. Add a half teaspoon of salt. Put the flour and the frozen butter slices in your food processor. Pulse on an off until the mixture looks like coarse crumbs - not too fine, but no big chunks either. Add half of the mixture of ice water and apple cider vinegar. ...

How To: Make a Dashboard Widget on a Mac with Safari

This is a tutorial on how to create a dash board app for Mac. All you have to do is go into safari, and find what you make the app for. The next step is to find right click on the back ground and click open in dashboard. Once you go to dashboard it will appear as a bright box. This new Widget is editable, you can change the boarder by pressing the "i" in the bottom right hand corner. You should have six options. For something more interactive such as YouTube, you can select a whole table and ...

How To: Create a sunprint cork board & jewelry tray

Grace Bonney from Design-Sponge shows how to create a corkboard and tray from sun print fabric (similar to the craft sun print paper, and available at bluesunprints.com). First iron the sun print fabric, far away from a light source. If printing leaves, first flatten them in a book. Arrange the leaves, then put the fabric in the sun for 10-30 minutes. The longer the time, the darker the print will be. Rinse the fabric in water until the water runs clear, then dry the fabric and re-iron. To ma...

How To: Renew your deck with composite materials with Lowe's

As your home ages, so does your deck in the backyard, but there are ways to resolve this issue. If that wooden deck is looking weathered or worn, you can simply replace the components with composite materials without a complete rebuild. Composite doesn't splinter or have knots, and it's low maintenance. This two-part video, brought to you by Lowe's, will show you exactly how to renew your deck with composite decking.

How To: Make DIY customized soap

Looking to give a personalized gift for a birthday or for the holidays? How about a personalized bar of soap, specific to your friend or family's style? In this episode of ThreadBangers's Decor It Yourself, Meg visits Bobbie Thomas, an editor for the "Today Show" and learns how to make your own soap, and how to customize it to be just about any color, shape, or size!

How To: Make linoleum asphalt mosaics with Craftzine

Linoleum asphalt mosaics, also called Toynbee Tiles, are artworks permanently embedded in pavement. In this video I'll show you how to construct your own from inexpensive materials. You can get real linoleum (don't use vinyl flooring) for this project by ordering free samples online. By cutting out a mosaic design in the linoleum and sandwiching it between layers of paper, wood glue, and asphalt crack filler, you can affix the mosaic very permanently to an asphalt surface, such as your drivew...