In this video, we learn how to make a wooden soda holder that defies gravity. First, cut a hole into a piece of wood that is large enough to fit the cap of a 2 liter bottle of soda. Now, with the bottle still full, place the bottle into the hole and raise the piece of wood up so it's sitting on the edge of a table. Now, the wood should stay there without you having to hold it. This will look like it's defying gravity, but it is just the soda and wood being positioned perfectly so it doesn't f...
In this tutorial, we learn how to install a foot throttle on your lawn tractor. First, weld the petal onto the base and create your own holder for the rod so it stays in position. You will have to bolt it down so it stays in place and doesn't move. On the other side, put a holder on it so the rod stays in place and doesn't move. There should be a bolt on it so it doesn't move and a clamp that is welded onto the end of it. The, string a thin metal wire to connect onto the end and bolt it onto ...
In this tutorial, we learn how to throw a crazy gyroball in wiffle ball. You will first stand still with the ball in your hand grasping it lightly, when you go to throw the ball, throw with force and spin your body around. This should make the ball go straight into the target almost every time you throw it. Keep practicing this until you have the hand placement correct. Try moving your hand in different positions around the ball so that the grasp makes the ball move in the right direction. Af...
In this video tutorial, viewers learn how to wear a gillie suit. Start out by wearing the suit and looking at yourself in front of a mirror. Take a friend with you to the field and have them take multiple pictures of you at various scenes. Have them make notes about what's good and bad about your efforts in the suit. Place some vegetation around the head and shoulder area and position yourself to be unseen. This video will benefit those viewers who enjoy hunting, and would like to learn how t...
In this video, Dina Prioste shows us how to do a yoga headstand. There are two different ways to do headstands, so choose which one is easiest for you. Get down on your elbows and put the crown of your head on the floor, similar to if you were doing a downward dog. Now, walk your feet and slowly straighten your legs until they are straight up in the air. The second way to do this, is to get in the same position, except tip toe your feet in until your legs are straight up in the air. Hold this...
In this video, Dina Prioste shows us how to do a yoga half boat and boat pose. Make sure you are warmed up before going into this. First, lie down on your stomach and bring your right arm out and lift your left leg up with your left arm. Try to lift your thigh and leg up while lifting the right arm up as well. Deep breathe while doing this, then hold the position for several seconds. Now, do this on the other side of your body for the same amount of time. For a harder exercise, grab both legs...
Forex— what is it? Any investor could tell you a complicated description of what Forex is, but the basics of the FX currency markets is— an over-the-counter financial market for trading currencies. The foreign currency exchange market has no central exchanges like the stock market and little regulatory oversight. With this beginner’s guide, learn the trading basics.
Like driving a car during rush hour traffic or sitting unmoving at your desk, your body is not designed to sit in one position for a long time, which means that if you ride a horse you may encounter back problems.
Are you tired of always having your hand in an akward position when playing your favorite games on the PC? Do you think it would be much easier on both your fingers and wrists to have them holding onto one thing? Well then, this tutorial is what you're looking for! Introducing, how to connect a PS3 controller to a PC computer tutorial! In this video you'll find out what it takes to use the sleek, sexy, black PS3 controller to play some of your favorite games. So check out the video above to f...
luvk9ines gives a tutorial on how to tie a two-handed suture tie for veterinary purposes. To begin the two-hand suture tie, knot the two ties together and continue to knot but you will alternate the direction of each knot. One knot/tie will be interlinked from the top and the next knot will be interlinked from the bottom. In other words, pretend that you are making a knot on a tie and each time you make the knot, the tie on the left will be going in the bottom direction. The next knot, the ti...
In this video tutorial, viewers learn how to do Ray-J's dance. This dance is a casual two-step and is very easy to do. This dance is very simple, and not too flashy. It is a dance that anybody can do. Simple move the feet from right to left repeatedly. This dance can done in one position or moving around. Users can move in any direction and rotate the feet to enhance the dance. This video will benefit those viewers who are going to a dance club or party, and would like to learn a very simple ...
In this how-to video, Nisha Obaidullah will show you how to do proper dead lifts. Start off with an olympic bar. Step up to the bar. Keep the bar as close to your body as possible. Pick the bar up with your knuckles facing outward. Make sure you drive through with the glutes. Stand up with the bar. Next, squat down with the bar. The hips will be brought backwards and your head looking forward. Use the glutes to drive back up to standing position. The bar should be just below the knees when yo...
In this video tutorial, viewers learn how to swing dance Lindy Hop. Users will learn 3 steps the basic step, the send out and the swing out. Begin with a comfortable V position with the partner. The male's hand should be on the female's upper back and the female's hand on the male's shoulder. Then hold each others hand. The basic step has 6 counts. It begins with two slow steps and then a quick triple step. For the send out, the partners simply switch the holding hands and the female steps ou...
Forever Yours demonstrates how to get shiny, healthy straight hair that will last throughout the day using a hairdryer, round brush and a ceramic technology flat iron. Apply a heat protectant before beginning the process to protect the hair. Divide all hair into three equal layers, bottom, middle and top. Clip middle and top sections up high on head and begin by drying the bottom section. Dry the hair fully, divide hair into two sections and starting from one side, flat iron from root to end ...
How to sharpen a knife using a sharpening stoneIn this video we are about to see how to sharpen a knife using a sharpening stone. First of all we need to know the faults and the damages on the edges of the knife where it is to be repaired. Then get a sharpening stone to make a sharp knife. Now rub the knife at a 45 degree angle with a fair amount of pressure. Now repeat the process by changing the positions of the knife on either hand. This is done to get the knife cutting towards the stone t...
Maki and Miho demonstrate how to write with a Japanese calligraphy brush. To write with a Japanese calligraphy brush, first position the paper to the left side of the brush with the ink on the right side of the paper. Rub the ink stick in the ink well with a little water. Then, soak the brush in the ink. To write Japanese characters, be sure to make the strokes in the correct order. Also, write slowly or your characters will not come out well. Use a long, flat paperweight to hold the paper in...
In this video, we learn how to caulk a crack in your home. First, take your favorite type of non-silicon caulking tube. Then, take a knife and cut the tip off of the caulking tube at a 45 degree angle. Then, take a coat hanger and stick in the tip of the tube to break the seal that's inside. Next, take an open frame gun with a spring release lever and install the tube into it. Now position the gun in a 45 degree angle to the crack and slide it along the length of the crack. Wipe the tip of th...
This video shows you how to stand correctly when hitting a golf ball. It is very easy. No matter what kind of club you have in your hand, you don't change. The most important thing is to have your arms hang straight down from your shoulders. If you do this correctly then your hands will be directly under your chin when you bend over the ball. Your knees should be slightly flexed over your laces and your shoulders should be over your toes. This gives you an athletic, balanced position and you ...
This is an instructional video on how to hit a golf ball out of thick rough. The major issue that most people have with hitting the ball out of the rough is that they end up smothering the ball when they swing. This is caused by the grass catching on the shaft and closing the club face. They way to fix this is, at address you need to open the club face a slight amount. When you swing the club will catch and your club face will be positioned perfectly and the ball will shoot out of the rough l...
In this video tutorial, viewers learn how to use the hand rollover to cure a hook shot in golf. A reason why people hit hook shots is because when they come to impact, they roll their hands too early and too much. Therefore closing the club face and causing the ball to go left. To correct this, when you're coming to impact, rotate into a position where the back of the left hand is facing the target. This will square the club face. This video will benefit those viewers who enjoy playing golf a...
In this video tutorial, viewers learn how to draw a paraglider on a computer. Start by drawing an oval for the head and attach it with a torso. Now draw the hands in the gliding position. Draw a flat oval and connect it with legs. Now draw the parachute and connect it with the figure. Start outlining the figure and parachute. While outlining, add the details. Once finished outlining, add the colors. Add clouds or any anything else in the background. This video will benefit those viewers who e...
dewalttv teaches you how to cut nested crown molding with a DEWALT miter saw. The advantage of this position is that it doesn't require a bevel angle. The bottom of the molding should be placed against the fence. To cut the right piece, set the miter to 45 degrees to the left and make the cut. To cut the other piece, the left one, set the miter angle to 45 degrees to the right and cut. You are done. This technique is useful when you don't want to worry about setting up a level cut.
You will need white glue, a paint brush, a ruler, scissors, medicinal gauze, self-adhesive foil, a utility knife and paper. First, using a paint brush, apply the white glue to the edge of a stack of paper that you would like to bind. Press the stack of paper down with a ruler. Let the glue dry. Unfold the gauze to fit the book and cut enough to cover the spine. Coat the spine with glue and paste the gauze to it, overlapping the sides of the book. Coat the gauze with glue and let it dry. Make ...
Adam from Chemical Reaction wants to show you a little movie magic. This video tutorial will show you how to shoot and edit a cool dance effect for your homemade film. You will see how to position the camera, set up the scene, shoot it twice (once with your legs dancing and once with you standing still), and then edit it in your favorite editing program to make it look like you're dancing without the top half of your body moving.
In this sports how-to video, Farmington (MN) HS head softball coach Heather Ballstadt demonstrates a fielding drill, where the players do not use a glove. To get into position for fielding, start on your toes with the knees bent. Keep the back straight. One person rolls the ball to the other person. The second softball player bends down, picks it up and rolls it back. Keep a wide stance to be able to shuffle if needed.
Changing your leg position can create a beautiful variation to an already existing cheer. Learn some cheerleading leg variations in this video tutorial.
In this dance how to video, Larry Payne demonstrates the sissone a la seconde ferme (to the second position closed), then en avant (in front), finishing with a "changement." The step sissone is named for the person who invented it. ballet move. This is a basic move for the beginning ballet dancer. Follow along with this dance tutorial and you can do the sissone a la seconde ferme ballet move.
Cuddles and comfort are as important for you baby as feeding is. Don't let anyone tell you that your bottle-fed baby won't bond with you. There is no reason why bottle -feeding can't be a warm and loving experience. If it's summer you can let your baby feel your bare skin. Make sure that you are comfortable. Feeding your baby in an awkward position will only compound the aches and pains most new mothers feel. Watch this video tutorial and learn how to bottle feed a baby.
Home improvement expert Danny Lipford teaches how to cut drywall around outlets Just watch the video tutorial to see how to cut drywall around electrical outlets.
Collecting cerebrospinal fluid in a dog may be required to help determine a dogs illness, and help determine treatment of the sore puppy. This video tutorial for veterinarians will show you how to collect the cerebrospinal fluid of a dog, properly.
In these two videos, Matt discusses 1.d4 d5 2.e3 Bf5, preventing White's Stonewall setup by beating White to the d3-h7 diagonal. The only way White can play for an advantage is to play 3.c4 with the goal of an early attack on b7. Some of these positions can also be reached via the Slav Defense.
In this online video series learn from advanced Yoga poses from expert Samantha Raphael, as she teaches Yoga techniques such as the one legged, one armed downward facing dog, and the warrior 1 into forward fold with bound hands.
The COVID-19 pandemic has hit everyone hard. With over 36 million American workers filing unemployment claims, finances are at the front of everyone's mind. Understanding your accounts has never been as important.
The first headset running on the Qualcomm Snapdragon XR2 chipset from an original equipment manufacturer is official.
While "Baby Yoda" from The Mandalorian threatens to overshadow it, Star Wars: The Rise of Skywalker arrives in theaters next week, which means it's time for Disney and Lucasfilm to ramp up its promotional strategy.
Facebook had a pretty big week in terms of augmented reality, with much of its news coming from the Oculus 6 keynote presentation. But Mark Zuckerberg's social media company found other areas of impact outside of Oculus 6 as well.
This week, Snapchat parent Snap came closer to fulfilling its smartglasses destiny by adding new 3D content capabilities to its third-generation Spectacles. At the same time, the now defunct Meta Company continued its fall from grace, as a judge ruled in favor of the plaintiff in the patent infringement case against the Meta 1 and Meta 2 headsets.
While Modiface, YouCam, and others have been playing in the virtual make-up marketing pool for a while, here comes Google ready to splash down with a cannonball.
Fast-food chain Jack in the Box has decided to put an augmented reality twist on the traditional sweepstakes promotion by employing the immersive powers of Snapchat.
While Toyota ranks as the leading automotive brand in the world, the company is a follower when it comes to augmented reality.
