Metal Bonded Ruby Search Results

How To: Hack Smart Cards for satellite TVs

Notorious hacker Chris Tarnovsky opens his underground laboratory to WIRED, providing a peek into the world of satellite television smart-card hacking. This complicated process involves nail polish, a pin head and various acids -- so don't try this at home (unless you're Chris Tarnovsky)! Chances are you won't even know what's going on here, but that's not going to stop you from watching this video tutorial on how to reverse-engineer a satellite TV smart card, is it?

How To: Make a Guinean bolong bata drum

This instructional drum video shows you how to make a Guinean bolong bata drum. The Bolong Bata comes originally from Guinea. The base is made of two half calabashes. One half is covered with goat hide, tied with rope to the bottom of the other calabash. The hole in the upper half is made for acoustic purposes. And if you like the music, you may put some money in it. The Bolong has three or four strings, made of rope, tied to a wooden stick on one side and a wooden keg on the other. The strin...

How To: Eat foods high in potassium

Potassium is an important metal for keeping your cells alive and can be found in many foods, including fruits, vegetables, and meats. Potassium is a mineral that helps maintain normal fluid balance in your body, helps control blood pressure and reduces your risk of kidney stones. Potassium is particularly high in foods like bananas, sweet potatoes, yogurt, yellow fin tuna and soy beans. Try these tips for buying foods rich in potassium in this healthy nutrition how-to video.

How To: Weave chainmail with a fork

It is possible to weave chainmail with a plastic fork. This instructional metalsmithing video will show you how it's done. This chainmailing technique does work better with a metal fork, though. You still need a pair if needle nose pliers to close the rings and work at a reasonable pace. Do you think it is possible to weave chainmail with a fork an knife? Now that would be truly decadent.

How To: Install a sliding patio door

To install a sliding patio or deck door, first decide a practical, aesthetically logical and structurally sound location for the entranceway. Do not locate a patio door closer than 4 feet from any corner, otherwise the solid-wood sheathing or metal bracing at the corners could be compromised. Also, plan ahead. We chose the door's location in part because it allowed the option of later adding a bathroom at the corner of the adjacent wall. For a step-by-step at the installation process, take a ...

How To: Fix the lead on a Dyson vacuum cleaner

Check out this home repair tutorial video that demonstrates how to repair a lead on a Dyson vacuum cleaner. After a long period of time, the lead will get metal fatigue within it and the machine will work intermittently. Follow the step by step instructions in this domestic appliance repair video to properly troubleshoot the Dyson vacuum's switch unit. Please note that all work should be performed by a qualified person. Make sure to take the necessary precautions to ensure a safe repair of yo...

How To: Collage and paint aluminum foil

This video demonstrates how to create an artwork using ordinary aluminum foil from your kitchen. This technique is good for those people who have no inspiration of what to paint but want to be creative. This collage technique is a fun way for beginners to experiment with textures, composition and color. Materials used in this video are aluminum foil, a glue stick, Bitumen (a material used as primer for painting on metal without rusting), collage or textured paper, spray paint, acrylic paint, ...

How To: Make steampunk binocular style goggles

Evenin' Gov'na! How lucky you are to have that datascope (a.k.a. computer); for now you can build yourself some SteamPunk Goggles for your next bioscope (a.k.a. movie)! You will need an old wallet, metal pieces, two plastic water bottle caps, old clock parts, an electric motor, mini tires, plastic pipe, an LED toggle switch, and a pair of sunglasses. Watch this video fashion design tutorial and learn how to make a pair of steampunk binocular style goggles.

How To: Make a glass out of a beer bottle

This video tutorial shows how to make a cool beer glass out of a beer bottle. This is also a great trick for cutting the bottle; forget the glass cutter or tricks with string and acetone. Just pour oil up to the level where you want the bottle cut off and place a red-hot piece of metal into it. Because of the great heat conductivity of oil and at the poor heat conductivity of glass, it will expand at the edge of the oil surface, cracking in a nice even line. Watch this instructional video and...

How To: Complete a new RC engine setup

See how to set up a new radio controlled engine from disassembly, cleaning, sealing the engine, and clutch bell assembly. This will show complete tear down, cleaning to avoid metal flakes in the engine, reassembly of the engine, and then sealing the entire engine. This can be used on any SB or BB engine (small block and big block) from OS, Picco, TRX, HPI, Axial and also any engine size.

How To: Start up a gas jet turbine go kart

A reasonably in depth Talk & Walk around and eventual start up and run of my DIY Jet Turbine Go Kart. Please excuse my mistake when I stupidly say that Jet engines don't 'Squeeze' the air - of course they 'squeeze' the air !! The compressor wheel within the turbocharger see's to that! - What was I thinking of ?? Oh, AND the fact I refer to the OIL pump as a FUEL pump as well - what a chump. Also, the tacho didn't seem to want to work correctly, It wouldn't read over 5000RPM for some reason - ...

How To: Keep flowered edges neat using an edger

If you have a beautiful Annual flower bed or a formal bed with lawn on one side you'll want a clean edge between the two. It not only looks nice but keeps weeds from encroaching into the bed helping reduce maintenance. There are several ways to create a nice edge to your beds. You can use a shovel, digging a line bit by bit but that gets hard on the back. Available materials for edging include, plastic edging and metal strips and wooden edging pieces. The wooden edges can be linked together b...

How To: Safely remove a lace hair system

This step-by-step video demonstrates how to properly and safely remove your hair replacement system. You will need spray or dab on adhesive remover, toilet paper, and isopropyl alcohol. These tools should help you remove your hair effectively.

How To: Replace brake blocks

Stuart Dennison demonstrates how you can replace brake blocks for your bicycle and do not let them wear down because the metal will scrape the rims. You will need a screwdriver, set of allen keys, and a new set of brake blocks. Replace brake blocks.

How To: Forge metal

In this metal working how-to video series, learn how to forge metal from metal working expert and fabrication specialist Terry Leafty. Terry will give you the history of metal forging and hot metal forging tips such as how a homemade metal forge is constructed, and what metal forging safety gear you need for working with hot metal. He'll also show you how to create sculptural items like vines and leaves.

News: Metal Isn't Flammable... Right?

Theo Gray of Gray Matter explains the principle behind sending steel up in flames- as long as it's steel wool, of course. The process is beyond simple. Spend 2 bucks and 2 minutes: purchase a steel wool pad, hold in pliers, light with a match. But the question is, why is steel wool flammable, while other forms of metal are not? Explanation below the video. Theo says:

How To: Wash bras and panties

The most used and most washed articles of clothing are undergarments. Underwear, specifically bras and panties, are in desperate need of attention after each and every use. They're not like a pair of jeans, wearing them twice in a row is not a good idea, nor clean. Shabby’s not chic when it comes to lingerie. Use a little extra care to keep your lace and silk bras and panties looking good.

How To: Secure crimp beads with crimping/chain-nose pliers

Attention jewelry makers! When making your own unique jewelry designs, one must learn how to secure the end crimp beads with crimping or chain-nose pliers. Crimp beads can be used for finishing off your strung jewelry or as "stoppers". In this tutorial, learn how to hone your jewelry-making skills!

How To: Find gold and sapphires

Do not discount the "pretty" rocks found along with gold. The sapphires you see are worth many times more than gold. Sapphire (& Ruby, (corundum), is like garnet, a relatively high specific gravity that will catch in a sluice readily. These gems act as gold, they will drop behind a boulder, in bedrock cracks, and set up in the stratiform layers of a bar on the inside bend of a stream. In a perfect (laboratory world) a river bar sets up from front to back: Gold, Platinum, Lead, Iron Ore (black...

How To: Draw Donald Duck on your own

This video illustrates the quick and easy method to Draw Donald Duck on your own . The process is comprised of the following steps:Step 1: Take a blank sheet of paper and a HB Bonded lead pencil.Step 2: Draw a face that resembles a duck's face. Make sure you don't make the ears too large as Donald Duck has got small ears.Step 3: Another point to consider is the length of the beak. Make sure it is elongated and oval shaped.Step 4: Now , make a oval shaped figure and shade it's outline to form ...

How To: Make a homemade snow globe

This is a really easy arts and craft project that's a great way for the whole family to get together. Because this craft project calls for the use of a glue gun, kids should only do this project along with their parents. You'll use items you already have around your house, and if you don't, you can probably buy them at the local dollar store or arts and crafts store. If you've been looking for a craft project to help bond with your kids, this may be it! http://www.myartsandcrafts.com/article2...

How To: Perl for the Aspiring Hacker - Part 1 - Variables

Before I start a series on remote exploitation, I think we should learn the basics of Perl. Perl, Ruby, C, C++, Cython and more are languages that some penetration testers just need to learn. Perl is a great language for multiple things, sadly, like many other scripting languages, it is limited by the environment in which it is designed to work in.

How To: 10 Key Things Everyone Should Know About Seasoning, Cleaning, & Maintaining Cast Iron Pans

Cast iron is one of the best surfaces to cook on, but taking care of it is a whole 'nother story. It's not as simple as just washing it in soapy water like all of your other pans, and everyone has different ideas about how it should be done. It seems intimidating at first, but once you learn the basics, you'll be making the best steaks, homemade pizza, and fried chicken of your life.

How To: 9 DIY Tricks for Cleaning Your Car

Ever see those cars so covered in dirt, dust, and grime that someone writes "Wash me" on it using their finger? Well, for those cars' sakes, as well as cases less extreme, a word of advice: procrastination is not a solution — it can only compound the problem. Self-cleaning cars are the stuff of the future, not the present, and your car needs attention now.