In this tutorial, we learn how to make a quick stop on a motorcycle. You must reach a speed of 15 mph first. A quick stop means you stop right when you are in the middle of driving, without slowing down first. Close the throttle first, then pull in the clutch. From here, apply both brakes evenly and firmly without locking them up and keep the handlebars straight. Make sure you ride safe and you do this with a helmet on after you have learned the basics of riding a motorcycle. Once you learn t...
In this tutorial, we learn how to change the oil on a Kawasaki Ninja 650R motorcycle. First, find the oil can on the car and use a socket wrench to remove the drain plug. Let the oil drain into an oil pan until there is no more left inside of it. When finished, replace the plug back on the can tightly. Now, open the cap up on the oil can and pour in your new oil. After this, start your engine and then check your oil level on the motorcycle. Then, you will have changed oil in your motorcycle, ...
If you plan on doing repairs for you own motorcycle, there are a few tools that you'll need first. One of the most obvious is a stand. These help lift the bike and allows you to get into certain areas without having to worry about tipping the bike over.
Learn the basic concepts to starting and riding a motorcycle! The motorcycle in this video is a Kawasaki Ninja model.
This motorcycle driving tutorial explains how to ride a motorcycle by showing you how to shift the gears of the bike. This video goes into detail about how gear shifting works on a bike and then reminds you not to overthink it in practice!
This motorcycle tutorial shows you how to take off the front wheel of a Honda 919 Hornet sport bike. Watch and learn how to remove the brakes, calipers and everything necessary to take off the front wheel of a motorcycle.
Changing your own motorcycle tires can save you a lot of money. This instructional video will show you how to Remove a motorcycle tire. Pretty soon, you can open up your own shop and change tires for money.
Every once in a while, we need our motorcycle tires to be properly balanced. This video will show you how to Balance a motorcycle tire using a Balancer developed by Scudman.
This is an instructional video on how to remove the fairings from my Ninja 650R. The fairings are essentially the Ninja motorcycle's plastic body. Removing these can allow you to put a custom body on, or make modifications under the fairings. Pretty soon, your Ninja 650R will be the best motorcycle around!
Becky Mull of J&P Cycles will walk you though what a motorcycle is made of, what the parts are and what they are for. Your motorcycle needs to be maintained and this video has some motorcycle tips for parts and accessories as well as just keeping it in top form.
Learn how to install a Star Rotor rear rotor to your motorcycle. The motorcycle used is a Triumph Street Triple.
Learn how to say the names of the parts of a motorcycle in French
In this video, we learn how to make a u-turn on a motorcycle. You must be able to complete a u-turn without putting your foot down. Depending on the size of your motorcycle, you will need 20-24 feet to do this properly. The most common mistake is oversteering and putting your foot down. Keep the clutch in the friction zone, drag the rear bike the stabilize the bike, add throttle if needed, and shift your weight. Keep your head up and make sure you are looking all the way through the u-turn. D...
In this tutorial, we learn how to start out on a motorcycle. Before you ride a motorcycle, you will want to learn where all the controls are. After this, you need to make sure all the springs are in place and the clutch works well. Then, check the engine oil to make sure it's full, and then make sure the throttle is working correctly. The steering bar should also be checked and the ignition switch should be checked. Once you know that your bike is ready, then you can pull the kickstand up wit...
In this video, we learn how to countersteer and turn on a motorcycle. First, you will push left and lean left while you are on the motorcycle. Push on the hand grip while you are leaning your body. Turn at a normal speed, not while you are going really fast, or you can fall off. You will turn the handlebars just like a steering wheel on a car going at a slow speed. This should be between 8 and 15 miles per hour, so you will have to countersteer. Practice this on a closed course and then you c...
In this video, we learn how to change the front brake pads on a motorcycle. First, grab a socket wrench and remove the mounting bolts that are around it. Then, remove the caliper from the bike. From here, you will be able to access the brake pads and remove them from the motorcycle. Replace these in with the new brake pads and then replace the caliper and the mounting bolts around the bike. Now you should be finished with changing the brake pads and you can test out the brakes to make sure it...
If you need to do a little bit of maintenance work on a motorcycle, this next tutorial will cover rotors and brake calipers. Brake calipers will need to be seperated even before the brakes can be replaced on a bike. In this video, you'll find out how to replace the rotor and brake calipers on your bike. It's an easy thing to do and will do wonders for your motorcycle. So sit back, pay attention, and good luck!
Performing regular maintenance work on a car or motorcycle is a great way to not only extend the life of your vehicle, but save a lot of money.
How to replace a fork seal on a motocross dirt bike. Cartridge type fork, fork seals are easy. Rocky Mountain ATV/MC] is the largest off-road retailer in the U.S. Check out their how-to videos on WonderHowTo. Search Rocky Mountain for more videos.
When you need to replace and install the brakes and rotors on a motorcycle, the rotor is one of the easiest things to take off and put on. It's an important piece to the bike and can be taken care of in a matter of hours.
Having mirros on your motorcycle is a smart thing to do and can help prevent any serious injury or death. It may seem like an easy thing to do, but it can be tricky for some. In order to do so, you'll need to find a specific area to place them and get the right tools needed to do so. So if interested, sit back, pay attention, and enjoy!
Just like a car, having your mirrors adjusted to the right position can be a big help. They are important to use when trying to change lanes and can help prevent serious accidents.
If you own a 2009 Kawasaki Ninja 250 motorcycle and need help with replacing the rear brake pads, this video is what you need. Instead of taking it to the dealership and paying a ridiculous amount of money, you can have it done yourself.
Simple instructions on how to replace the clutch on an off-road motorcycle or ATV. Installation of a Tusk clutch kit from Rocky Mountain ATV/MC.
Change the oil on a four-stroke Honda CRF 250/450 motorcycle or trx 450 atv. Rocky Mountain ATV/MC. Dirt bike oil change.
How to change the oil on a four-stroke KTM motorcycle or ATV using Tusk oil filter. Rocky Mountain ATV/MC. Dirt bike or quad oil change.
The easy way to remove crank bearings from ATV and Motorcycle crank shafts. Tusk tool also pulls gears and other bearings.
These guys started with a Honda Rebel junker and a dream - to make a practical, zero emissions vehicle for commuting.
This motorcycle parts video shows you how to change the grips on a Honda 919 or Hornet 900 bike. Learn how to take the grips and bar weights off the handlebars and replace them with new ones.
Knowing when to change your motorcycles tires is an essential part of maintaining your bike in good condition. This video demonstrate types of tire wear that indicates when to change your motorcycle tires.
Here are some tips on how to ride a motorcycle safely with a passenger.
Justin shows you how to properly put on a motorcycle helmet.
Safety on a motorcycle means more than wearing a helmet. Chopper Chick Jackie Nunes covers safety and styles of jackets on the market today.
Hak5 isn't your ordinary tech show. It's hacking in the old-school sense, covering everything from network security, open source and forensics, to DIY modding and the homebrew scene. Damn the warranties, it's time to Trust your Technolust. In this episode, see how to build a motorcycle camera mount for under five bucks.
In this video, we learn how to master the obstacle swerve on a motorcycle. First, you must reach a speed of 15 miles per hour and then swerve around a 7 foot obstacle 13 feet ahead. Learn how to swerve to the left first and then start to swerve to the right on a closed course. Do not brake while you are swerving and learn how to use counter steering. Keep your head up and look where you want to go while you are riding. Enjoy riding your bike and make sure to be extremely cautious when you are...
In this next video tutorial, you'll find out how to remove the rotors on a motorcycle. If you need to find out whether or not it's bad using your fingernail is a good way to test it. Switching the rotor is important for ensuring that your bike will last for a long time and that you'll be safe of any kind of injury. It's easy to follow and doesn't require a ton of work. So check out the video, pay attention, and enjoy!
If you own a motorcycle that needs some maintenance, taking it to the dealership is going to be costly. But doing it yourself, can be a great way to save on some cash.
In this tutorial, we learn how to perform clutch-less shifting on a motorcycle. You will put a lot of pressure on your toe going up, then close the valves. It's been said that this is bad for your bike, but that depends on the person who is driving it. It takes a lot of practice to figure out how to do this, so take your time when doing this. Also, don't practice this in a busy street because you run the risk of losing concentration and hitting other vehicles. Don't do this often, so you don'...
In this tutorial, we learn how to use the front break on a motorcycle. Using the front break only will give you 70% stopping power while you are on your bike and in motion. If you only use the rear break, you will have 30% stopping power while in motion and riding your bike. This is the worst option of all, because it will take you longer to stop and you have greater risk of hitting someone. Make sure to stop the proper way by using both the front and rear break to stop the bike while you are...
How to replace brake pads on modern off-road motorcycles. Change worn brake pads with Tusk brake pads from Rocky Mountain ATV/MC. Repair brakes.
