Never Ending Loop Search Results

How To: Tie knots for fly fishing

In this video, learn from commercial fisherman brian Lee how to tie knots for fly fishing! Fly fishing requires two simple knots, which are the clinch knot and the loop-to-loop connection. Discover how to tie an improved fisherman's knot for fly fishing with help from a pro!

How To: Make a messy bun

This video here is about making a messy hair bun. First the hair is drawn into a ponytail. Then, using a thick rubber-band, insert the the middle of the ponytail partially into the rubber-band so as to make a loop. Then spread the hair strands of this loop to make it look messy. Now from this spread loop, take bunches of strands and lift it slightly upwards and fix it using a hairpin. Fix the hairpins firmly so that they stay in the place. Spread out this bun from the middle. Curl up or tuck ...

How To: Do the half-double crochet stitch for a scarf

Beth from New York teaches how to make a basic half double crochet. You will need: Yarn and hook. Look carefully at your job, and make sure that you see the hole where you should insert your hook clearly. Yarn over once, then insert your hook to the hole you already seen before with two threads above your hook and one thread below it, yarn over again and draw the loop pass the hole. You will have three loops on your hook by now. Yarn over, draw the thread pass through all three loops, and rep...

How To: Knit a cable cast on

This instructional knitting video demonstrates how to knit a cable cast on. Start by making a slip knot with a 6" tail and place it on the left-hand needle with the working yarn coming from the back. Knit a stitch in the slip knot loop, but leave the slip knot on the needle. Give the new loop a half-twist and place it on the left-hand needle. You now have the first two stitches. For all subsequent stitches, knit each new loop between the last two stitches on the left-hand needle. Cable cast o...

How To: Tie a bowline on the bight knot

The bowline on the bight knot, demonstrated in this how-to video, is tied by doubling the line. Create a clockwise eye then thread the bight through the loop and bend the bight back over the loop. Work the knot by pulling the standing part. Watch this video knot-tying tutorial and learn how to tie a bowline on the bight knot.

How To: Tie a noose loop knot for trapping animals

This simple noose can be done quickly and is ideal for trapping small game. This video serves as a step by step detailed guide on how to tie it. Shown in two ways, a simple one and a more involved way that makes the rope and noose move more easily. Watch this video hunting tutorial and learn how to tie a looped knot noose for trapping animals and game.

How To: Make a wire loop for jewelry

This video shows aspiring jewelry makers how to make a simple wire loop using round nose pliers. This essential and fundamental wire working technique is one of those jewelry making tricks that you must master in order to make almost any kind of handmade jewelry.

How To: Tie the trucker's hitch knot for boating

Learn how to tie the trucker's hitch knot. The trucker's hitch knot is one of those boating knots that once you learn it, you wonder how you ever got along without it! Use this knot to cinch down a load on you car top, boat, horseback, you name it. This combination of knots allows the line to be pulled tight as a guitar string. Tie off one end of rope. Lay rope over load to be tied down. Tie a slippery half hitch knot in the middle of the line to form a small loop. With the free end make a tu...

How To: Make HUGE Soap Bubbles

Learning to make giant bubbles for this video has been the most fun I've had with a project in a long time. It's addicting to try to get them to grow bigger and bigger than the ones before. Since filming this video, my skill has improved tremendously and the bubbles you're about to see, though spectacularly big, are dwarfed by what I've made since. Everyone loves to watch. This is definitely one project that will draw a crowd!

How To: Tie a necktie from a first person point of view

Windsor knots are among the most well-known type of knot. They look wonderful and they just seem to radiate talent and professionalism. However, the process is painless and takes only minutes to learn. You should watch this if you want to learn how to make Windsor knot. 1. Drape the tie over your shoulders (the same way that you would an Honors cords at a graduation) with the wide end hanging down roughly a foot over your right shoulder. 2. Take the wide end of the tie and cross it over the n...

How To: Make a simple double crochet stitch

First of all you have to prepare the basic chain as shown. Now yarn over and the first three chains of the crotchet are always considered as the double crotchet. So you have to go to the fourth chain from the hook and then insert the hook. Now you have to drop the loop. So now you have three loops on the hook. Now yarn over and go through the first two loops and then again yarn over again and go through the last two loops. This is the double crotchet. Now finish this rope by using the same pr...

How To: Wrap your hands for Muay Thai, boxing, and MMA

There are many ways to wraps your hands for Muay Thai or kickboxing. One way is to first attach the Velcro to itself so that it creates a loop, after rolling the hand wraps back up in the opposite direction. Now you want to attach the loop to your thumb then wrap the wrap around your wrist three or four times. Secure the thumbs and come up towards the knuckles them you need to make a knuckle pad. You do this by looping the fabric about four times against your knuckles, securing it with your t...

How To: Tie a Double Windsor knot

If you want to know how to tie a Double Windsor knot, this video is for you. To tie a Double Windsor knot: Lift up the collar of your shirt. Place the tie around the back of your neck so that the wide end hangs down on the side of your dominant hand, a little more than twice as low as the thin end. Cross the wide end once over the front of the thin end and then around the back of the thin end a few inches below your neck. Slip the wide end through the back of the V-shape made by the knot, pul...

How To: Do the magic loop knitting technique

Knitting blogger Sapphires'n'Purls provides step-by-step basic instructions of the magic loop knitting technique. To begin Magic Loop knitting, you will need the following supplies: One circular needle with flexible cable, skein of yarn of your choosing. To begin, you will cast on 12 stitches onto the circular needle. Next you will slide all your stitches onto the flexible cable. Once all your initial 12 stitches have been cast, divide the stitches in half, putting six stitches on the left si...

How To: Tie a Homer Rhode loop fishing knot

Know your knots! With this free video tutorial, you'll learn how to tie a Homer Rhode loop knot. Homer knots are typically used with heavy monofilament and work really well for fishing. The knot is easy to tie provided, of course, you know how to go about making it. For an easy-to-follow, step-by-step overview of how to tie this useful fisherman's knot in a minute's time or less, watch this free video knot tyer's guide.

How To: Write "tree" in Japanese

If you have ever wanted to learn Japanese or even just a few words in the language then this video is perfect for you to begin with. This video will show you how to write the word "tree" in Japanese in a fun creative way. The video takes a picture of an actual tree and redesigns it to become the word tree, but if you want to just learn how to write the word on it's own then a grab a piece of paper, pen and begin with making a horizontal stroke. Next, make a vertical line through the horizonta...

How To: Use Everyday Looper on the iPhone

This fun tutorial features Ed, who shows you how to use an iPhone application called Everyday Looper. Everyday Looper is a musical application that lets you loop music, sounds and your voice. Ed shows you all the functions of the Everyday Looper, from the playing control, to the First Loop and the merge. Watch this video if you want to get in on the fun and start using the Everyday Looper to make your day just a little more special. Check it out!

How To: Fish a two-hook panfish rig for deep-dwelling fish

The two-hook panfish rig is meant for vertical fishing under the boat in fairly deep water, for deep-dwelling fish like crappie, catfish, bluegills, and sometimes even bass. It involves two hooks hanging off the line, off droppers, to fish close to the bottom. Watch and learn as Wade Bourne of MyOutdoorTV shows you how to fish a two-hook panfish rig.

How To: Tie a Knute hitch

In this video, we learn how to tie a Knute hitch. The purpose for this is to make an easy dummy cord on something with a hold for it. To start, tie a simple overhand knot in one end and then make a bite in the knot. With this bite, insert this into the hole in your item. Once it's through, take the end with the knot and put it through the loop. Then, pull the end of the string until it's tight over the item with the hole. Then you can use this as a handle so you don't lose your item!

How To: Tie the Easiest Loop Knot for Fishing

A loop knot can be used to attach most fishing lures and all hooks and flies. A loop allows greater action of the lure or fly and always ensures the line will pull straight down the shaft. With knots that cinch tight agains the eye of the hook, the may move off to one side causing it not to pull straight.

How To: Tie a dropper loop fishing knot

The Dropper loop is a classic loop knot which is often used on multi-hook fishing lines and bait rigs. The dropper loop is also often used by fly fishermen to attach an extra fly to the leader. The dropper loop can be created in the middle of a the fishing line and forms a loop which is off to the side of the line. Watch this video knot-tying tutorial and learn how to tie a dropper loop fishing knot. Tie a dropper loop fishing knot.

How To: Edge loop model in modo

Double click an edge, select a loop. That's the main principle behind edge loop modeling in modo. Modo has an entire suite of edge tools available for modeling - this tutorial shows you the basics of edge loop selection and getting started with this method of modeling in modo. Edge loop model in modo.

How To: Make a 'redneck' wind chime from old gas tanks

This video is about how to make a wind chime from empty oxygen cylinders. It may be also known as a "redneck" wind chime. As a safety precaution use a small nail to go inside and make sure all the air is out. Use a small hand hack saw and cut slowly to make sure all the air is out. To suspend the cylinders from the middle use wire wrap. Make one loop to begin with and go around to the opposite side and mark the place. Make a single loop cross the wires over, use a pair of pliers where they cr...