Ng Cap Search Results

How To: Make a graffiti mop from a repurposed cleaner bottle

In this tutorial, we learn how to make a graffiti mop from a repurposed cleaner bottle. First, you will take stamp cleaner in a small bottle that you can pick up from any craft store and a bottle of Pilot ink (1 oz). Next, empty the stamp cleaner from the bottle and then pour the ink into that bottle using a dropper. After this, place the top back onto the bottle and shake it for several seconds. When done, take the cap off and you will be able to write on a wall now using this bottle's soft ...

How To: Make your own microphone blimp

In this tutorial, we learn how to make a microphone blimp. You will first need a shotgun microphone and a power module that attaches to the microphone. There will be low roll off switch on the bottom which is supposed to help with wind noise. Next you will need to build a blimp with a filter you can purchase from a farm supply store. Apply a steel reinforced putty to one side of it, and this will be your end cap. Place your microphone through this and then your microphone will become complete...

How To: Build your own backyard patio

In this tutorial, we learn how to build a backyard patio. First, determine the location keeping in mind other buildings and landscape features. There should be a retaining wall around the patio so measure out all the different dimensions. Position a cap block at the highest center location. Then, use a level to transfer the patio height over the proposed location. You will then have to figure out how many blocks you need. When you calculate your digging depth, take into account your foundatio...

How To: Bleach your hair white blonde

They say blondes have more fun, so why not go as blonde as possible? In this tutorial, learn how to use bleach to create a white blonde look, no matter what color your original hair is. If you are ready for this dramatic change, this tutorial is here to show you how to use the bleach, step by step, so that you safely dye your hair without burning yourself or ruining your locks. This process will strip all of the color from your tresses, so make sure you are ready for it before you start.

How To: Re-spool a fishing pole

Maintenance is important for your fishing equipment. When it comes time to re-spool your line, the task may seem daunting. It is really quite easy, however, and with this tutorial you will learn exactly how to re-spool a fishing pole so that it lasts a long time. When re-spooling a fishing pole, twist off the drag cap, take off the spool, and bring it to the local tackle and bait shop. Find out how to re-spool a fishing pole by running the line through the top guide and flipping the bail up w...

How To: Measure a 1:12 dollhouse polymer clay plate

This video tells us to measure a 1:12 dollhouse polymer clay plate. You can use a 'MINI MAGLITE FLASHLIGHT' to cut out the clay from some clay that has been rolled out on a platform. Roll the toothpaste cap along the edges of the circular piece of clay. The center of the plate is made by pressing it in the center with a small bottle or the end of a pencil which has a flat base. Cut a smaller circle of clay and put it below the plate to form its base. Press the center of the plate again to sti...

How To: Make a virgin piña colada

In this video from Zoedog3 we learn how to make a virgin pina colada! For this you'll need a blender, a cup of ice, cream of coconut, pineapple juice, and a nice glass to drink it from! First, put the ice in a blender. Next, add a splash of cream of coconut. Then add a dash of pineapple juice. Finally, top that off with some ice cream. Now you can put the cap on the blender and press the blend button. When fully blended, shake it a bit, and then pour it into a fancy glass and garnish it with ...

How To: Make your own lipgloss quick and easy

In this video tutorial, viewers learn how to make their own lip gloss. The materials required are: a lip gloss container, butter knife, chap stick, shimmer dust or pigmented powder, candy powder, bowl and microwave. Begin by cutting the cap stick tube into pieces and place it into a bowl. Heat it in the microwave 45-60 seconds. Stir the melted mixture and add some shimmer dust. Stir the mixture and add a drop of candy flavoring. Stir once again and add the lip gloss into a container. Finish b...

How To: Ice cupcakes like a professional

In this video tutorial, viewers learn how to ice cupcakes. In order to ice a cupcakes, users will need a piping bag, tips, coupler and a spatula. Screw the coupler at the end of the piping bag and select a tip to put on the end of the coupler. Fold the bag 2-3 inches downward and place it into a cup to hold it. Now scoop some icing with the spatula and place it inside the bag. Squeeze the bag to bring the icing down and tie an elastic on top to close it. Viewers will learn how to 3 different ...

How To: Properly cut and smoke a cigar

In this Hobbies & Toys video tutorial you will learn how to properly cut and smoke a cigar. Remove the cigar from the wrapper and get a nice whiff of the aroma. Different people use different methods to cut the cigar, like sniffing it or using a guillotine cutter or various other types of cutters. Be careful while doing this so that you don’t cut the whole cap off otherwise it may unravel. Also never take the band off the cigar, especially if you are smoking outside and it is very cold. If ...

How To: Make perfect ramen noodles

This video is a demonstration of how to make the perfect ramen noodles. The requirements for the recipe are 2 packets of ramen noodles, milk and vegetable oil. Using butter instead of oil enhances the taste of this recipe. Water is heated in a pan and the noddles are added to hot water. Let the water boil and cook the noodles till they turn soft. Drain the water from the noodles using a strainer and put it back in the pan. Add half a cap of vegetable oil to the strained noodles and mix thorou...

How To: Open and replace a Zune 80GB hard drive

In this how-to video, you will learn how to dismantle an 80GB Microsoft Zune and remove the hard drive. You will first remove the cap at the end. Remove the screws at the bottom. Next, unclip the sides, top, and bottom of the Zune. You can use a prying tool to help you with this. Do this slowly, as you might damage the Zune. Once you can remove the back cover, you will have access to the internal parts of the mp3 player. Remove the tape holding the components together. Next, remove the screws...

How To: Draw 8-bit Toad from Mario Brothers

Drawing an 8 bit toad seems very easy from the video of Mario brothers, first you draw two short standing lines which are the eyes and are black in color using freehand draw option. Then you draw a somewhat oval shape using the same option around the eyes which would look like a face using the color light yellow then you provide darker shades on each side to give the face a 3d effect. Then the cap is drawn after which you draw the rest of the parts the body, dress, hand, shoes etc and finally...

How To: Paint nails in a sparkly pink and white silver design

Love4Nails demonstrates how to paint nails with a pink and white sparkly design. First, apply a hydrating base coat. On top of the base coat, apply the color of your choice like a light pink color. Then, create the side swipe which is about half of the nail. Create a straight side swipe in a white color. You may need to do two coats. Then, create a flower with the background color on the white polish. Add a pink rhinestone to the flower. Repeat the technique making a white flower on the pink ...

How To: Make home hair protein treatments

In this video, the user gives some suggestions on how to make at home hair protein treatments. She emphasizes that every good treatment consists of two components: a conditioning element, and a protein element. She suggests eggs, avocado, almond butter and soy milk for protein and yogurt, mayonnaise, nut and olive oils, and honey for the conditioning portion. She explains the importance of including both elements for moisturized hair and also that you should choose ingredients in response to ...

How To: Restring a fishing pole

In this video tutorial, viewers learn how to restring a fishing pole. Begin by twisting off the drag cap and take off the spool. Take your fishing line and run it down the rode holes. Flip your bail up and tie a quick knot. Put it on the spool and reel it in. Hold the rope with some tension and reel it in slowly. If you reel it in too fast, the line will easily get tangled and you will have to remove or cut off the line. This video will benefit those viewers who are interested in fishing and ...

How To: Make a diet Coke and Mentos rocket

Do you want to make a diet Coke and Mentos Rocket? Well, first of all you have to buy a 2 litter bottle of Diet Coke and some Mentos. Then, go outside, because you don't want do it indoors, believe me. Wrap the paper cover off the Mentos, but leave the foil wrapper on and put the roll into the bottle. After this, you'll have to close the bottle and shake it. In the next step you'll have to open slowly the cap bottle until it starts fizzing. Throw it down with power and be sure there's no one ...

How To: Easily make a rocket out of trash

Hacker Daily teaches you to how to make a rocket "outta trash". They take a bunch of everyday materials (paper towel roll, body spray cap, paper cup glue gun, scrap cardboard and a model rocket engine) and create a rocket, by first cutting cross hairs in the bottom of the cup and gluing the rocket engine inside. The video than tells you to insert the paper towel roll trough the bottom of the cup. Than they tell us to glue the body spray cup on top of the "rocket". After adding fins the rocket...

How To: Use a jerky gun to make beef jerky

This video demonstrates a simple method of how to make beef jerky at home. First, combine lean ground beef, seasoning, and a packet of cure is combined in mixing bowl until evenly mixed. The beef mixture is then tightly compacted into a jerky gun. Once the beef mixture is filled to the top and the cap of the gun is inserted, the trigger is pressed on the gun to release the jerky mixture on the dehydrator tray. Once the dehydrator tray is full, it is turned on and the beef is dried until it re...

How To: Draw Handy Manny

In this video tutorial, viewers learn how to draw Handy Mandy. This is a close up, which means it’s easier to draw. Sketch a large circle for Handy Manny's face and box in his body. Flesh out the arms, draw in gloves, sketch in the T shirt, draw the cap and put details on the face. Handy Manny has big eyes, snob nose and a smiley mouth. To color this in, use the airbrush tool with orange for the face and rosy cheeks. Make the face red and white, then outline the whole thing in a darker shade....

How To: Draw a skateboarder

User DrawingNow teaches you how to draw a skateboarder in mid flight. You start by sketching basic shapes like an oval for the head, parallelograms for the hands and feet and a large square for the body. Make sure you make the legs bent and placed on top of the skateboard. You can then draw on top of that, adding more details like a cap, muscles for the arm and a shirt on the body. You can delete the first outline and start coloring it in. Add more details, like wheels, shoes and pants, and a...

How To: Make deep fried biscuit donuts

In this video recipe you will be shown how to make delicious biscuit donuts. To make biscuit donuts, do the following: Heat about 1 inch of oil in a skillet. Remove the biscuits from a 10-count can, and use a small cap to press in the center and make the hole. Fry them in hot oil until they are brown on one side, and then turn and fry the other side. Remove and place on paper towels to drain excess oil. They are great topped with powdered sugar, frosting, a glaze, or even cinnamon sugar. To m...

How To: Make a miniature pumpkin pie out of polymer clay

Have you ever wanted to create a miniature pumpkin pie model out of polymer clay without the hassle of complicated crafts books or manuals? Have you tried making miniature clay models in the past and have had them disintegrate when drying the clay? This video will tell you step by step, how to create a miniature pumpkin pie out of polymer clay using a bottle cap, a fork, a small flashlight and a pen. This is a fun project for the family, and won't disappoint.

How To: Make a pumpkin spice martini

You need to have three kinds of ingredients – Vanilla vodka, pumpkin spice liquor, and Baileys. Find your martini shaker and fill half of it with ice. Add one ounce of vodka, one ounce of pumpkin spice liquor and one ounce of Baileys all in equal parts. You do not need to measure it exactly; you could just pour them into the shaker just approximately in equal parts. Put the cap on your shaker and shake until the outside of the shaker is frosty cold. Then pour the contents of the shaker into a...

How To: Get started with the Nikon D40 & Nikon D40x

It is a tutorial that explains the basic guidelines of Nikon D40 and D40x cameras. This enables everyone to take photographs successfully and prepare the camera for use. Attach the lens of the camera by rotating towards the right; make sure that no dust gets into the camera. Then remove the protective cap from lens and align the white dot on the lens with the white dot on the camera's body. Turn to the left until it clicks in to place. First, we must charge the camera's battery; when the LED ...

How To: Replace an engine coolant tempature sensor on a Saturn

Richpin shows the proper way to replace an engine coolant temperature sensor on a Saturn S series. Before he explains the steps of replacing the sensor, Richpin covers the tools to use. Also, Richpin illustrates the types of tools to avoid before beginning the replacement process. First, remove the cap from the expansion tank and then tighten it the way it was before. Next, Richpin shows the procedure for locating the temp sensor. Then, remove the connector from the sensor. Afterwards, Richpi...

How To: Make a sour patch apple martini

This video instructs the viewer on how to make a Sour Patch Apple Martini with candy garnish. To mix this drink you will need ice, vodka, apple schnapps, apple juice, and Sour Patch Kids candies. To start off, put some ice in a steel beverage shaker. You will then add one part vodka, one part apple schnapps, and two parts apple juice. Put the cap on, and shake vigorously. The video suggests, "Put ya booty into it!" Place sour patch kids (about four or five) in the bottom of your martini glass...

How To: Make soap with the melt and pour method

To make the soap you will need some soap base cut into little bricks so it's easier to melt, a color brick, scent, a knife, a ladle, and some molds. Take some of the soap base blocks and put them in your crock pot. Let it cook for a hour or until it turns into soup. Put in one of the dye color bricks so that you get some color. Put in one cap full of the fragrance. Mix it all up with the ladle. Let the dye brick melt until you have the color you desire and then take it out. Take some of the s...

How To: Pick a Master Lock with a paperclip

In this video the viewers are shown how to pick a Master lock. He starts off by telling his viewers what items they need to start. A tension wrench is made from a pen cap and a pick from his sister's bobby pin. He then demonstrates how to successfully pick the lock. He also suggests another tool you can use, a common household item - a paper clip! After that he shows how easily he is able to pick the lock with the paper clip as well. He explains at the end that Master locks are one of the har...

How To: Change a road bicycle tire & tube

This video from Canada Bicycle Parts shows how to change a bike tire. The tools required are a bicycle pump and tire levers. He demonstrates with the rear tire, and puts the chain on the proper cog to create less tension on the chain. He releases a lever on the brake and opens the quick release lever and lowers the rear wheel. He removes the valve cap and removes all the air from the tube. He demonstrates how to remove the tire with two tire levers. He explains how to determine what caused th...

How To: Change a tire on a Dutch bike

This video shows you how to change a bicycle tire with your bare hands. First, he shows you how to get the tire out. Use the valve cap to let all the air out of the tire tube and then loosen the bead all the way around. Eventually you can just pop the tube off then inspect and patch it. Then you put the tire back on and pump some air into it. Make sure the tire looks like it's seating properly. That is how you change a bicycle tire.

How To: Replace a flat tire

Learn how to replace a flat tire with a spare in this video. First, make sure your car is parked on a safe flat road. Remove the hub cap covering the lug nuts screwed on to the tire. While the tire is still on the ground, loosen the lug nuts attached to the tire with a lug wrench. Locate the jacking point on the metal frame near the flat tire. Crank the jack just enough to lift the flat tire off the ground. Unscrew the lug nuts with your fingers. You can now easily slide out the flat with you...

How To: Refill your RC truck shocks with shock oil

To refill your RC truck shocks the first step is to remove the shock with an alarm key located at the bottom of the shock. The next step is to pull the spring back and remove the lower joint and spring then remove the cap screw and be careful, their might be some oil still in there. Fill all the way up to the top if you want stiffer shocks and pump the shocks a few times to eliminate bubbles in the oil. Then reassemble and check to make sure it meets your needs and you are done.

How To: Crochet a larger-sized beanie cap for a man

You repeat stitches each round, so once you get the basic sequence down you can do the whole thing. This is an easy pattern to crochet once you learn it and you can apply to lots of different projects with your crochet ventures. Not only that, you can make a fashionable hat without paying trendy prices at the mall! Learn this once and you can save money forever. This video will show you how to crochet a beanie for a man.