The wind is one of the most dynamic of all natural forces, and rendering it properly in a digital environment is important and challenging. This video will show you how to create and animate wind in the 3D graphics suite Blender by showing you how to make a flag, then make it wave realistically. Unless you want to make a replica of the flag planted on the moon, you're going to need some wind in your 3D flag model, and this video will show you how to make it so.
Many people who use braided line complain that it gets wind knots which may have to be cut off and expensive line discarded. Almost all "wind knots" have nothing to do with the wind and are caused by user error. This video explains how to avoid those knots and start taking advantage of braided fishing line.
If you want to perform an interrupted and a subcuticular suture you should first make a bite through the skin. In order to make a bite through the skin you should put the needle point perpendicular to the surface, turn your wrist and make sure it arrives at an even point from the entry point. Grasp the needle as it comes from the tissue. Make sure you always keep the needle in view. Then ti e the suture with an instrument tie and form the knot on the side of the wound so it does not effect th...
Starboard made this video in order to make an intro to windsurf. It's a windsurf academy video that goes over the start to windsurfing. It covers basic techniques like equipment setup, tacking, gybing and getting up.
Watch this winds tutorial video to learn several different ways to play sharps and flats on your pan flute. You can push the flute into your lip, tilt the instrument, lower your jaw, or push your top lip out to cover part of the opening. These four methods allow even beginners to easily play sharps and flats on the pan flute.
Tacking is an important part of windsurfing and, of course, it's best to start learning when there are light winds. Usually, at this level, most time is devoted to the gybe move, and the carve tack is a variation of this, a transition that you need and will give you the confidence to get on smaller boards and go out in stronger winds. When done well, the tack can also look impressive. Watch Sam Ross teach you how.
Conducting phishing campaigns and hosting Metasploit sessions from a trusted VPS is important to any professional security researcher, pentester, or white hat hacker. However, the options are quite limited since most providers have zero-tolerance policies for any kind of hacking, good or bad. After researching dozens of products, we came out with 5 potentials that are ideal for Null Byte readers.
If you want to have your character punch a very hard object, or punch a person very hard, then it will help if you can show their damaged, bloodied knuckles afterwards. Now you can with help from this video. It will teach you how to create a very gory fake knuckle wound out of basic prop and makeup materials. Now your characters can punch with authority.
When a wound is particularly messy or has been sutured improperly, a dog ear can form. A dog ear is a flap of skin that does not fit cleanly into the suturing of the rest of the wound. This video features a doctor explaining how to suture a dog ear properly. One handy tip: if you lengthen the laceration away from the dog ear, the skin will hang looser and be easier to suture. Counterintuitive, but effective.
Looking for a quick video lesson on how to play Earth, Wind & Fire's "Let's Groove Tonight"? It's a pretty easy tune (and consequently one well suited for budding bassists) - there are only two parts to the song and this video provides a thorough breakdown of each. For more information, and to get started playing the bass line from "Let's Groove Tonight" yourself, watch this free video bass tutorial.
First of all you have to understand that if you don't have a rudder in you kayak, still you need not worry. The rudder is far from being any essential piece of the kayak. However if you still decide to want one then you can add one later. Rudder is placed on the side of the kayak. When you want to lower it then you have to pull the chord to move it down from its stored position. You have to control the rudder with foot pedals. The main purpose of the rudder in a kayak is not to turn a kayak. ...
For anyone who has ever used a microphone, trying to record something during a windy day can be a bit of a pain. Of course we can eliminate most of the interference with a simple wind screen that can be purchased at the store, but many times they can be a bit pricey. Well, in this tutorial find out how to make your own wind screener for a Zoom H2 mic. Enjoy!
One of the many great things about Mumford and Sons is that many of their songs are achievable for all levels of guitar players to play. This video will teach you how to play their song "Winter Winds" on guitar, and don't be scared! You can do it.
You can use the FreeForm plugin to create the look of cloth blowing in the wind - like an animated ribbon, or a banner waving in the wind. The key is in designing the displacement map to get a truly realistic effect.
In this video, we learn how to do an orbit at an orbit light show. The light should spin clockwise in one and and counter clockwise in the other. You must pay close attention to keep these spinning back and for. Start out by winding the lights up and mastering this so you can produce different shapes. After you learn the wind up, learn how to make the stars with it by winding it up one direction and let the orbit in the middle unwind itself in the opposite way. Once you're comfortable, you wi...
Killing bugs used to be the domain of fancy chemicals that, it turns out, hurt us as much or more than the bugs. If you have a flying pest problem and need a green way to control it, watch this video to learn how to make a DIY wind tunnel trap for your insect nemeses.
In this video, we learn how to build a portable personal heater. This is a great weekend project that is easy to make and will keep you warm during a freezing winter. You will need: two double a batteries, charger, twin double a battery charger, winding wire, and balsa wood. First, cut the wood the size of the battery holder and cut it out. Now, reel off 30 ft of winding wire and hold down with duct tape. Wind the wire around the piece of wood and tape down the other end of the wire. Scrape o...
In this video, we learn how to fix a slack chainsaw recoil starter. All you need is to wind up the recoil string so the tension can be put back on. First, remove the bolts out (there will be around four of them). Next, lift the side casing off and find the nylon spool with the cable cord wrapped around it. There will be a clock spring around that. Now, wind it up with a screwdriver while holding the spool of the corn and winding up the spoon a couple of times. When you reach the correct tensi...
There is no such thing as a sucking chest wound. All chest wounds suck. Except perhaps for fake ones, which are essential to making a really gritty, gory film in most cases. This video features detailed instructions on how to make a fake chest wound out of latex and other special effects materials. Since it is a prosthesis, it can even be reused! It is a little complicated, but the end result looks great, so try this out in your next movie!
Elizabeth Chamberlain with Space Lift demonstrates how to strengthen your career path with feng shui at home. First, find your focus room with your energy map by laying the energy map on top of your home floor plan. The career area is in the front center section of your home, along the line of your front door. In feng shui, all the energy enters through your front door. Encourage the energy up to your front door with your front yard. Feng shui means "wind water" which is the best way that ene...
The padlock knot is designed to look like a padlock, but without the actual function of one. In order to tie this knot take your rope or string and fold it in half. After you have done that make a loop with both sides of the rope making sure you leave a loop at the top. Put the two loops together the one in the front turning clockwise and the one in the back counter-clockwise. Make sure to leave a hole in the center for the rope to pass through. Now wind each piece of rope through the hole in...
This is a tutorial on how to make a $2.00 didgeridoo. This musical instrument is made Redneck style out of ABS pipe. The Digeridoo is an Australian wind instrument. This one is a non-traditional plastic version.
Studying to be a nurse? Then here is a nursing how-to video that teaches you how to assess and treat a venous wound with a nylon dressing. Every nurse should know the basics of this technique, follow along and see how easy it is to treat venous wounds with nylon dressings. It is important to monitor the progress of your patient's wound throughout their stay. These medical tips are sure to help you pass your nursing exam with flying colors.
Studying to be a nurse? Then here is a nursing how-to video that teaches you how to treat a trauma wound in the right lower extremity. Every nurse should know the basics of this technique, follow along and see how easy it is to use suction with a diverted tip to treat a wound that came as a result of a trauma. Our host recommends using a suction device plus Aqua Cell and lyofoam as part of the treatment. These medical tips are sure to help you pass your nursing exam with flying colors.
Nina Perlove teaches vibrato for the flute in this instructional flute video. This technique can be applied to other wind instruments, too. This tutorial is great for a beginner attempting the vibrato for the first time, or for someone looking for ways to improve their vibrato. These exercises have a long history and have been tried and proven. Practice your vibrato on the flute and improve your flute playing skills!
This medical how-to video demonstrates how-to suture an open wound. Follow along and learn the step by step process of closing open skin. Note that suturing should be performed by a medical professional.
Watch this winds tutorial video to learn how to play the pan-flute. This instructional video covers the tuning and some basic techniques for beginners who have never played the pan-flute before. This helpful how-to video will help you get started playing the pan-flute.
Watch this winds tutorial to learn how to play a hit, the easiest and most common type of Irish ornamentation, on a tin whistle. Even first-time tin whistle players will find this video helpful. You'll be able to play hits on your tin whistle in no time after watching this instructional video.
This is a video tutorial that explains how to make a wind powered LED out of a pinwheel and an old VCR. Why have just a pinwheel when you can have an LED pinwheel?
This video demonstrates how to treat a chest wound outside of a medical facility using the plastic wrapper of a battle dressing and bandage.
In this video hip hop lesson, dancer, choreographer and vocalist, Samantha Davies teaches us 5 counts of 8 of an intermediate hip hop dance to the song Wind it Up by Gwen Stefani.
Learn how to wind a cable so that it will unwind without kinks and tangles.
Want to learn how to play Bob Dylan on the guitar? With this tutorial you can learn how to play "Blowing in the Wind" by Bob Dylan on the acoustic guitar. This version is a simplified version of the song and is not exactly how Bob Dylan plays it. "Blowing in the Wind" uses the capo on the 4th fret. This lesson is geared towards intermediate guitarists because it assumes prior knowledge of guitar playing. Watch this how to video and you will be able to sing and play along to "Blowing in the Wi...
There are a lot of videos out there that offer instructions for creating all sorts of fake wounds. Most of them, however, focus on cuts and gashes rather than that other devious and action-packed type of wound: the burn. This three-part video features detailed instructions for making a burn wound on your face or other body part using makeup and other household products. Now your characters get lit on fire and you can render the results accurately.
Want to play Donovan's "Catch the Wind" on your ukulele? Learn how with this free video ukulele lesson from Ukulele Mike. Whether you play the ukulele or bass kazoo, there is no better way to improve your chops than by learning to play your favorite songs. Not only is it more fun and much easier than running drills or memorizing a chord book by wrote, it's obviously also a wonderful way to build your repertory of songs. For more information, and to get started playing this classic Donovan pop...
Here is a very crafty and cute way to create a wind chime out of old salt and pepper shakers that can be found either around your house or bought at second hand stores and a small tin tray or plate to hang your shakers from. A bit of out door or water-proof glue and some colorful string or twine, scissors and a nail or awl will finish out all the supplies you need.
Watch this winds tutorial video to learn how to hold and play the tin whistle. This video is intended for people who have never played the tin whistle before. This helpful how-to video will teach you all you need to know to get started playing the tin whistle.
Watch this winds tutorial video to learn how to develop your own style on the tin whistle. This instructional video is intended for intermediate tin whistlers. After you've watched this helpful how-to video, you'll be able to develop your own playing style on the tin whistle.
Watch this winds tutorial video to learn a basic but crucial ornament, the cut, on the tin whistle. The cut is very similar to the hit and is a good technique for beginners to learn, but it takes a lot of practice. Tin whistlers of every level will find this instructional video helpful in learning how to play the cut on a tin whistle.
Watch this winds tutorial video to learn how to play a more difficult type of ornamentation, the roll, on a tin whistle. The roll takes a lot of practice to learn, and it is a combination of the cut and the hit. Tin whistlers will find this how-to video very helpful in learning how to play a roll on a tin whistle.
