Linoleum asphalt mosaics, also called Toynbee Tiles, are artworks permanently embedded in pavement. In this video I'll show you how to construct your own from inexpensive materials. You can get real linoleum (don't use vinyl flooring) for this project by ordering free samples online. By cutting out a mosaic design in the linoleum and sandwiching it between layers of paper, wood glue, and asphalt crack filler, you can affix the mosaic very permanently to an asphalt surface, such as your drivew...
Everybody had a yo-yo at one point in their life; some when they were just little children, some when they were bored teenagers, some when they found the kid inside of them they never knew of, and even some when they felt retirement was just not very fun. It just goes to show that the yo-yo is not going anywhere anytime soon. Who could ever believe that a toy consisting of two equal disks made of plastic, maybe even wood or metal, with an axle and string could be so damn pleasing, so much dar...
Everybody had a yo-yo at one point in their life; some when they were just little children, some when they were bored teenagers, some when they found the kid inside of them they never knew of, and even some when they felt retirement was just not very fun. It just goes to show that the yo-yo is not going anywhere anytime soon. Who could ever believe that a toy consisting of two equal disks made of plastic, maybe even wood or metal, with an axle and string could be so damn pleasing, so much dar...
Learn to play golf like Tiger Woods in this rather effusive recreation of a memorable shot in Championship Golf History. In this Great Shots video from GolfLink, golfing professional Joe DeBock from Torrey Pines golf course in La Jolla California demonstrates the chip-in on the 17th at the 2008 Open, on the actual golf course where Tiger did it. This instructional video is accompanied by verbose commentary on the historical event, the famed golfer, and the course itself.
In this Home and Garden video tutorial you will learn how to paint any piece of wood furniture. The video is from CR8everydaycrafts.com and is presented by Jen Grant. You will need yellow and red color general finishes paint, aging wax, sand paper, a piece of soft cloth and of course your furniture. First fine polish the raw wood furniture. Then paint two coats of yellow general finishes paint. Now paint two more coats of red paint. Allow the each coat to dry before painting the next coat. Af...
This video tutorial shows how to use a Roarockit Thin Air Press for teaching deckmaking. The glueup is done in one session. See how to build a skateboard with the Roarockit Thin Air Press!
An MSR sweetwater micron pre-filter will purify water to drinking quality. It's a handy water filter to take along on camping trips or outdoor activities. Watch this video survival training tutorial and learn how to replace an MSR Sweetwater 5 micron pre-filter.
Redoing your floors can be expensive unless you know how to do it yourself. Learn the basics for installing a new engineered wood floor in this how to video. Watch the short DIY show clip and follow along so that you too can install a new engineered floor in your kitchen.
Keep your wood-burning fireplace well-fueled this winter. Northern Alberta Institute of Technology Forest Technology instructor Alan Pollock shows you how to cut wood and make kindling. Watch this video and learn to chop your own timber.
Sagging screen doors are a common annoyance. This how to video shows you some simple solutions to fixing those sagging doors on the outside of your house.
Tim Carter, of Ask the Builder, demonstrates how to make professional square angles of different slopes, using a wood framing square.
Tim Carter, of Ask the Builder, shows a few easy tips for painting wood siding for your house.
Watch this video to see how to make a wood pen.
A short demonstration on how to build a compost powered hot shower. This is a part of the greater effort for permaculture in desert living.
Shawn Clement, Director of the Richmond Hill Golf Learning Centre and Canadian PGA Teaching Professional, shows you how to perfect your fairway wood performances.
Ali Alami with Fit Climb demonstrates how to get in shape for mountaineering. You can do these exercises in a park or at home. Your core and lower body are important in mountaineering. First, find a wet, wood bench that is four to six inches off of the ground. Do step ups to work your quadriceps and glutes. Balance briefly on one leg and then bring the other leg up. You can also do side steps. Step downs help you get you used to gravity. Calf raises are also helpful. To strengthen your core u...
John Campbell instructs the audience on using the hand drill method of starting a friction fires. First, you can use a piece of cottonwood as your fire-board (in his opinion, cottonwood is the best). You need to carve a small round hole about a quarter of an inch away from the edge on the fire-board. Then, you get the spindle going (take a sturdy stick and rub between your hands, scraping the stick across the board). This helps you create a good indention, where you can carve a deep notch int...
This video demonstrates how to build a fire with a bow drill. Your bow should be slightly curved. It should be the length of your arm. It can be fashioned from a tree limb and rawhide cord. You can use any number of types of cord. You will need a top rock. You will need a board. The board must be dry and dead. You will need a spindle. It should be the same type of wood as your board. You will also need a tinder bundle.
Bob and Leslie of the Washington Township Fire Department demonstrate how to choose the right fire extinguisher for your home. Fire extinguishers come in a large range of sizes so be sure to choose one that you can easily handle. If it’s too heavy you won’t be able to use it properly. Fire extinguishers are labeled according to the type of fire they are used on. A is for ordinary combustibles such as wood or paper; B is for flammable liquids such as gas, grease or oil; and C is for electrical...
For new landscapes people tend to generally plant the new 'purple leaf plum' trees in a square shaped small plots. They also plant some small plants around it to make it look good. However when the tree grows older it needs to spread its roots. At that time these plants may try to hinder the trees roots growth. Therefore it is advisable remove them once the tree starts growing bigger. Then you can also add water to the roots by spreading it around the area of the tree.Whenever there is proble...
A persimmon is not ready to eat until it has a soft consistency like jelly or pudding, though the fruit can be harvested and brought inside while still hard, so long as the branch the fruit hangs from is picked along with it. One way to be sure that a persimmon is ready to eat, is to press a finger against the skin of the fruit. If a fingerprint is left, the persimmon is ripe and delicious. Once they start getting soft they go bad very quickly, so it's good to prepare them so you can eat them...
Demonstrator Andy Hirsch offers a tutorial on how to perfectly bind a book using two different methods. The first method is with binding clips the second with a binding jig. You will need and cutting mat, X-acto knife, paint brush, ruler, binder clips and binding glue. Use use 8 1/2" X 11" paper folded in half for the book pages and 11"x 17" page for the cover. In the 'Binder Clip Method', you make all the pages and cover flush and use the binder clips to keep everything together. Ad glue to ...
Chef Jason Hill tells us how to open a champagne bottle without much noise safely. Before opening the bottle make sure it is chilled to about 45 to 50 degrees. You can fill a bucket with half ice cubes and half chilled water and chill it for 30 minutes or you can refrigerate the bottle for 3 hours .When the bottle is chill remove it and dry it with a towel and carefully remove the foil with the wired wood intact. Grab the neck of the bottle with your left hand and place your thumb over the co...
Make your cat happy by giving them a sturdy scratching post. They'll sharpen their claws – without tearing up your furniture.
Eagle Lake Woodworking, hosted by John Nixon, offers great do-it-yourself guides for building your own furniture, especially in the American Arts and Crafts style, and turning your garage into an amateur woodshop. Search Eagle Lake on WonderHowTo for more carpentry tutorial videos. From Eagle Lake Woodworking on this specific lesson:
What tools and materials do you need for turning a bowl on a lathe? Learn more about the equipment for woodturning in this free woodworking video from a wood shop expert.
Woodturning is the process for making items, like bowls, out of wood. Learn how to turn and sand a bowl from a woodturning specialist in this free crafts video series.
Sharpened woodturning tools make creating wood projects simple and easy. Learn how to sharpen and use woodturning tools from a woodturning expert in this free crafts video series.
Woodturning is creating items out of wood on a lathe. Learn how to create key chains and light pulls from a woodturning expert in this free crafts video series.
Woodturning uses skew and gouges to create designs in wood on a lathe. Learn about making cuts with these tools from a woodturning expert in this free crafts video series.
Mosquitoes are a big problem, and citronella candles are not the solution. There are a lot of mosquito species. The American Mosquito Control Association reports there are more than 3000 mosquito species in the world, and about 200 of those occur in the US. The most common are the Aedes, Anopheles, and Culex species. These are also the three mosquito species most likely to transmit serious illness, and all of them live in the US.
A recent pathogen outbreak in Illinois is just one of many outbreaks of an underappreciated, but serious, viral infection passed from rodents to humans. These hantaviruses have been cropping up more frequently in the last decade or so, giving us more reason to clean out our dusty attics, basements, and garages.
Spiders are common pests that typically prefer to live outdoors. However, insects and warmth will eventually attract them into our houses. They like to spin their webs in corners, crevices and unused areas of your house. Most species are harmless and even act as a natural repellent for getting rid of other insects. However, in some cases, spiders can be very dangerous. Whichever the case may be, they are scary and people are always looking for natural ways to get rid of them.
The previous owner chose this view. The trunk is naturally hollow. Dead wood is coming toward us. Branches are coming to the back so we will have to do some manipulation. The two parts of deadwood play together in an interesting dance. The piece of deadwood can be improved and the branches can be moved more to this side of the tree as a front. This is what we'll go with. (Using various tools, the bark is removed from the left side deadwood). Height has been added to the branches. Lots of torn...
In order to make your own resin tabletop, you will need the following: a clean piece of wood (e.g. 2' x 2' piece of plywood, resin, gloves, objects to imbed in the table, and ultra seal.
In this video from cdrhead we learn how to save money by staining your own concrete floors. First vacuum the floor and under the sheet rock removing as much dirt and dust as you can. Place plastic on all walls and unfinished wood trim. Now use a 4 inch scraper to remove any remaining materials. Now scrub with a broom with water or buffer. Spray a mild acid detergent on the floor as well now and scrub with a buffer. Now vacuum the floor with a ShopVac. Now spray the acid stain using a handheld...
John White (Doña Ana County Extension Agent) talks to Natalie Goldberg (Extension Plant Pathologist) about Powdery Mildew that affects many plants. They look at a Japonica that is heavily infested. Powdery Mildew is enhanced by shaded condition despite the dry climate. It starts with a spot spore infection that will easily spread by the wind or by rubbing. Control methods are difficult and involves a lot of routine applications of chemicals (ornamental fungicide) to keep it in check once the ...
Carving a bonsai tree can be an interesting and rewarding experience. One may think that the tree would be injured in this process, however the process can actually strengthen the health of the tree. The first step when carving a bonsai is to reduce the height of the tree to about one meter. The necessary tools required consist of: a high speed grinder, a rotary cutter, and a weasel. The rotary cutter is good for removing large amounts of wood. Before beginning to cut the tree look at the tre...
You can make a rocket at home using these items found around the house. Icing sugar, measuring tape, a PVC pipe, black marker, hammer, flat headed bolt around 18 millimeters wide , mortar and pestle, drill, drill bit size 5 millimeter, potassium nitrate and kitty litter.
This video presentation details how to control and reduce a slice in golf. Materials required include a golf club, golf balls, and optionally a tee. Ideally a wood would be involved in this practice. How to control the slice is somewhat of a misnomer since the intent of the process is to remove the slice since it can be an unwanted thing. A slice is when a golf club is swung and the club remains 'open', this is when it is facing toward the right as the swing is coming through, this imparts a ...
