Outer Surface Search Results

How To: Create a mosaic jewelry box

This video demonstrates making a mosaic jewelry box. A plain jewelry box is decorated using different shaped pieces of glass. First, round flat glass pieces are glued in the center of the top and sides. Then a ring of glue is put around the circle and rectangular pieces are glued around that. Square tiles are used around the top edge, and odd shaped pieces are used to fill in the rest of the surface area of the box. After it has dried for two hours, a glaze is applied to the entire box. This ...

How To: Prepare for installing laminate flooring

This video tutorial shows you the proper way to prepare for the installation of laminate flooring. One thing you need to do is maintain a temperature of a minimum of 65 degrees. You can install it practically anywhere, as long as there is no moisture or dampness. Concrete, ceramic, wood , and vinyl are all find for installation but the surface needs to be dry, flat and smooth. This video is a simple guide to give you some precautions before you begin your installation.

How To: Apply vampire makeup for your hands

The video shows the user how to make their hands resemble those of a vampire. This is done by applying a thin layer of white makeup to the backs of the hand with a cylindrical sponge. The reason for only applying the makeup to the backs of the hands is to avoid coating surfaces you touch with the white makeup. It's suggested that you leave a gap between the makeup and the sleeves of your jacket as it does not spoil the effect and helps eliminate the likelihood that you'll get makeup over your...

How To: Clean vinyl LP records with Titebond II wood glue

This video shows how to clean old records using Titebond II wood glue. He has the record turning slowly on the turntable, and while it's turning, slowly squeezes a line of glue around and around onto the surface of the record, starting from the middle. He explains that it takes between four and twelve hours for the glue to dry completely. After the glue is applied to the entire record, he takes an old credit card and spreads the glue evenly onto the record, all the way out to the edge. When t...

How To: Make an ethernet patch cable

The following video is about making an Ethernet patch cable using RJ45 cable tool, category 5,5e or 6 cable, RJ45 connectors and optionally a scissors and cable tester. First of all, measure out the length of cable needed for your purpose and then cut it. Strip out the outer insulation of the cable using a cable tool. After stripping the insulation, sort the eight wires inside it in the order orange-striped, orange, green-striped, blue, blue-striped, green, brown-striped and brown. Cut off an...

How To: Eat a pomegranate the "right & proper way"

Pomegranates are very delicious fruits. They are very nutritious, too. This instructional video teaches you how to eat a pomegranate in the right and proper way. It teaches you how to eat pomegranate with using a juicer, glass or knife. First you should start crushing the fruit from the middle top of it. You have to go on crushing it slowly and gradually with out applying too much pressure on the fruit. at one stage you will get a small hole on the surface and you can start drinking the juice...

How To: Make a DIY whiteboard for under $5

This video will teach you how to make a white board at half the cost and a better quality than you can buy and it will last a lot longer. You start with an 8x10 piece of Plexiglass with only surface scratches and spray paint. Try not to touch the side that you're going to paint. Remove only one side of the Plexiglass protecting plastic. Sand any sharp areas and paint in a well-vented area or outside. Paint lightly with the color of your choice and let it dry before adding a second coat. You c...

How To: Create a blue & gold cut crease eye makeup look

This tutorial teaches you how to create a blue and gold cut crease makeup look. Use MAC's uppity fluid base on the lid and inner corner. For the lid, use Shock Tart and put it all over. For the inner corners use Obsessive Compulsive Cosmetics called Oric. Blend it into the lid color. Now take MAC's technical color in Auto Day Blue from the outer corner going through the crease. With a small smudge brush, use a dark blue color to cut the crease. Blend the blue out towards the eyebrow making it...

How To: Make Filipino-style fried chicken

Max's Filipino style fried chicken. Takes a spring chicken or a Cornish game hen, ground jack pepper, dried bay leaves, cilantro or parsley, and a pan full of water. Bring water to a steam then add bay leaves and chopped cilantro. Then in a metal colander or strainer place chicken over the steaming water. Once chicken is steamed let drip out the excess water. Add the pepper and some salt to the chicken by rubbing over the surface. In cooking oil fry the chicken until a light golden brown. Tak...

How To: Hang a picture with no holes

You use a bike rack that extends from floor to ceiling. Pick where you want to put your picture and place the bike rack there. Adjust the bike rack so that it is at the level you want the picture. Then take a clamp light and clamp it to the pole of the bike rack. If the light slips on the pole, you can wrap some duct tape on the pole to create a surface that the light will stay on. Point the light toward where the back of the picture is going to be. If the picture you want to hang does not ha...

How To: Juice a pomegranate

Start with a nice firm pomegranate. Take the pomegranate in your hands and start squeezing it by pressing with your thumbs one of the other pushing into the pomegranate. Squeeze all around the whole surface of the pomegranate. As you press in using your thumbs overlapping each other you will hear the pomegranate seeds popping inside the fruit. Take the softened pomegranate and bite a hole into the side. As you bite the hole make sure you suck the juice as it begins to come out. Once you have ...

How To: Remove stubborn masking tape

Do you have a piece of stubborn masking tape stuck somewhere and you just can't get it off? Does it stare at you in the face, begging you to have a nervous breakdown? Ron Hazleton is here to save your day. In this video, learn how to remove old unwanted masking or duct tape from walls, wallpapered surfaces, concrete (and more) using a hair dryer to warm & soften te adhesive.

How To: Make an easy and inexpensive DIY frame for your art

Framing and matting your favorite posters or art can get expensive! In this Curbly video tutorial, you'll learn how to make a quick and inexpensive frame. All you need are some basic supplies available at almost any arts and crafts supply store including: A sheet of plywood, a plexiglass cut to the size of the plywood, archival paper cut to the size of the plywood, frameless corner clips, and a bracket.

How To: Prevent swimmer's ear

Watch this video tutorial to learn how to prevent swimmer's ear. Don't let this painful infection of the ear canal keep you out of the water! A few simple precautions can combat the excessive moisture that causes bacteria to fester.

How To: Solder a wire onto a switch when building circuits

This is an instructional video featuring Doug Prime, founder of the Future Engineers Center at the University of Massachusetts Lowell. Strip the wire and make sure the wire is tied on tightly before soldering. Don't drip balls of solder. Make sure the tip is clean. Then hold it on the joint to be soldered for 4 seconds. Then poke the solder on the surface and it will melt with the heat.

How To: Make a latex skin over carved foam

Are you in need of some kind of mold or cast for your next feature film, but need to save a few bucks? As an alternative to casting (making a shape from a mold) one can carve foam into a desired shape and then coat the foam with liquid latex. This will not create a perfectly smooth surface, but is much less expensive than casting as it requires fewer steps and less resources. So, with this video tutorial, you can learn what you need to know about making a latex skin over carved form.

How To: Clean an Apple Mighty Mouse

If your Apple Mighty Mouse is covered in fingerprints or its surface has become soiled, it can be gently wiped with a clean lint-free cloth. If necessary, moisten the cloth using only water, making sure not to oversaturate it. Be aware that the mouse contains electronic components that may be damaged if water drips from the cloth into the mouse via the seam around the scroll ball or around its underside.

How To: Do a flatland BMX move

Flatland is a freestyle BMX bike riding style on smooth, flat surfaces without any ramps or jumps. Learn how to flatland from our BMX biking expert in this extreme sports video tutorial. Take action: feather the brakes, shift your weight, and practice, but remember not to pull up too hard on the handle bars. Patrick, the instructor in this how-to video from Live Strong, resides in Campell, CA and has been riding for several years. His sponsors include Mongoose Bikes, Fox, Monster, and Calabas...

How To: Make an oval box

This is a video tutorial on how to make an oval box using card stock, rubber stamps, and ribbon. Decorate paper to use as surface to your cardboard oval box. You can also use an oval stencil to make varying sized oval shapes for the box and lid shape. Have fun crafting this nifty and elegant little container.

How To: Update drywall

When faced with old, damaged plaster walls, one technique to dress up the room is to install drywall over the existing plaster. A drywall overlay gives the walls a smooth, fresh surface that's ready for new paint, paper or trim. This is a common technique used among professional contractors hired to renovate houses bought under foreclosure. For example, real estate companies that invest in foreclosures often deal with houses that are more than 50 years old and exhibit serious signs of aging. ...

How To: Install a butcher block kitchen countertop

Butcher-block kitchen countertops have traditionally been very popular and these days are often used as companion tops with other materials, such as solid-surface tops. In addition to their aesthetic appearance, they can receive hot pans without damage. You can make up your own butcher-block countertop, or the same technique can be used to create cutting boards, or a top for a roll-around cart. The steps in creating the top are fairly easy, but the project does require some special tools, esp...