Paid Based Search Results

How To: Warm up your thumb and index finger when playing the ukulele

In this clip, you'll learn how to warm up your thumb and pointer fingers with a simple scale-based picking exercise for the uke. If you want to get really good at playing the ukulele, it stands to reason that you'll need to practice. Happily, the Internet is awash in high-quality video lessons like this one from the folks at Ukulele Underground. For more information, including a step-by-step overview, watch this free video ukulele tutorial.

How To: Make a Cricut get well card

This video tutorial is in the Arts & Crafts category where you will learn how to make a Cricut get well card. Cut out the shape of a dog out of white at 4". Then cut out the ears and nose out of brown also at 4". Cut the dog again in brown at 4" for the background. Now assemble the dog as shown in the video and glue on two Google eyes. For the card base take a 10" x 7" card and fold it in half. Take out a brown sheet at 4 3/4" x 6 3/4" and a striped mat. Now apply glue on the card and assembl...

How To: Make a beaded ring using a daisy chain variation technique

In this tutorial, we learn how to make a daisy variation beaded ring. First, thread your needle with 1 yard of fire line. After this, string eight of the 4mm beads onto the thread. Tie these into a loop, then thread the 8mm bead down to the loop and run the needle through the fourth crystal and the 8mm will rest in the middle. Now, add on your petals by adding three seed beads and a 4mm bead, running it through the previous loop. Do this again on both sides and repeat the process. To finish, ...

How To: Survive a Zerg rush in StarCraft 2

Looking for a quick guide on how to withstand a Zerg raid when playing as a Terran in Starcraft 2? It's easy! So easy, in fact, that this clip can present a step-by-step overview of an effective defense technique in about under twenty minutes. For more information, and to get started defending your own Terran base, watch this video guide.

How To: Use the Zerg Overseer and their Spawn changeling ability in StarCraft 2

After 12 years Starcraft 2 is finally here to blow your mind. If you're looking for help with the game, you've come to the right place. We have tons of videos about how to do just about everything in the game. We have strategies for winning campaign and multiplayer games. We have guides to using the immensely powerful level editor. We'll even teach you how to build a Terran Barracks out of Legos. This video will show you how to use the Zerg unit the Overseer and their Spawn Changeling ability...

How To: Build an effectively composed and arranged Terran army of units in StarCraft 2

After 12 years Starcraft 2 is finally here to blow your mind. If you're looking for help with the game, you've come to the right place. We have tons of videos about how to do just about everything in the game. We have strategies for winning campaign and multiplayer games. We have guides to using the immensely powerful level editor. We'll even teach you how to build a Terran Barracks out of Legos. This video will show you how to build an effective and diverse army of Terran units that utilizes...

How To: Synchronize graphics in Adobe Flash Professional CS5

Looking for a primer on how to sync graphics when working within Flash CS5? This clip will teach you everything you'll need to know. Whether you're new to Adobe's popular Flash-development platform or a seasoned web developer looking to better acquaint yourself with the new features and functions of the latest iteration of the application, you're sure to benefit from this free software tutorial. For more information, and to get started making your own Flash-based twinkling starscapes, watch t...

How To: Create a Codex avatar costume

In this tutorial, we learn how to create a Codex avatar costume. First, find a long white lace dress for the base of the costume. After this, mark the length you want, then cut the seam and sew on the end to avoid any frays. After this, use remaining lace to make a piece of fabric that you can bedazzle and add gold ribbon to. Apply cuffs to the dress, then wrap a red corset around the top of the dress on your waist. After this, make a necklace that has red jewels in the middle of it and wear ...

How To: Lubricate bicycle chains and gears & adjust its brakes

Keeping your bike in shape is the only thing that could help keep you in shape. Once its done, you have to pay tons of money to get it fixed, and in the meantime, you're off your bicycle, sitting on your couch, eating potato chips. To avoid this problem, a little bicycle maintenance goes a long way for the health of both you and your bike. This video will show you how to simply lubricate your bike (chains, gears, derailleur) with Tri-Flow and adjust the brakes.

How To: Make a Christmas holly felt garland for the holidays

Christmas is coming up, but you've been so busy scoping out presents for friends and family, organizing your annual holiday cocktail party, and working hard for your holiday bonus to pay much attention to decorating your house. What do you do if you're in a bind and just don't have the time to decorate? Watch this video to learn how to make a quick holly felt garland for the holidays.

How To: Use HDDHackr to make a hard drive work with XBox 360

HDDhackr is a really cool little software utility that allows you to make any hard drive work as an XBox 360 hard drive. No need to pay a ridiculous premium to buy a cheap hard drive from Microsoft! This video will teach you how to use HDDhackr to set up a hard drive for use on your XBox 360. Now you can backup your game library, download as many movies as you want, and do all sorts of other fun things that the tiny hard drive you had before would not permit.

How To: Return the needle settings on a HBI 21BB engine

In this video tutorial, viewers learn how to return the base settings on a HPI 21BB engine. The engine has 3 needles carburetor: high speed, mid-range and low speed. Begin by turning the high speed needle clockwise until it is closed. Then turn it 3 1/2 turn counterclockwise. Then turn the mid-range needle clockwise until it is closed. Then turn it 3 1/4 turn counterclockwise. When adjusting the low range, make sure to hold the mid-rang with a screwdriver to prevent it from turning. Now turn ...

How To: Get started using ThinkingParticles in Cinema 4D

Looking to get your start with ThinkingParticles? This exhaustive six-part video series presents a "gentle" introduction to using the ThinkingParticles rule-based particle system within Cinema 4D. For complete, step-by-step instructions, and to get started using ThinkingParticles in your own C4D projects, watch this 3D modelers guide.

How To: Fix Your iPhone 4 Antenna with Scotch Tape

The iPhone 4 is one of the most divisive pieces of consumer electronics ever released. Its defective antenna has ruffled the feathers of even the most diehard Apple enthusiasts. This video will show you how to fix the antennagate issue using only some Scotch tape, which when applied to the proper place, will keep the antenna from grounding itself on the metal piece below, which is what causes the phone to lose signal when you hold it.

How To: Make a documentary film step-by-step

In this Film & Theater video tutorial you will learn how to make a documentary film step-by-step. The various steps involved in making a documentary are defining the documentary, stylizing the genre, shooting and finally editing. A documentary is a movie that documents reality. It is based on real life situations or people. The three most sub genres are the observational documentary, the expository documentary and the participatory documentary. The different styles can be sit-down interviews ...

How To: Perform tutting, fingertutting and digital combos

In hip-hop dance, or any dance for that matter, there are so many different types of techniques and moves it can be hard to keep track of them all. Most importantly, it can be hard to figure out what you like and how to do it. Well, if you're interested in things like tutting, fingertutting, or digital combos then this video may be for you.

How To: Find the rubber ducky easter egg in Crackdown

In this video from Achievement Hunter, you'll be going after the rubber ducky easter egg. Alas this won't net you any points for your gamerscore, but what it does do is give you an awesome weapon that you can use against bad guys. Although it's not very powerful, it's still fun to play with. This rubber ducky can be found on a ferris wheel and is pretty hard to get to. So sit back, pay attention, and have fun!

How To: Build a storage box for your deck

Building a storage box for your deck is a smart way to add extra storage to an area usually not known for having storage. The great thing about using wood than plastic, is that is adds to the feeling of being outside and can be stained to match the look of your deck. This three part tutorial, will take you through the steps of building a successful storage box and shows you step by step.

How To: Create a delicate rose updo with Reiberry

Whatever your favorite flower may be, you can't deny that roses are the most romantic and alluring flowers around. In this tutorial, Reiberry bases a delicate hairstyle on the robust beauty of a rose. This pinned-up side bun is unlike any chignon you've ever seen, and though a bit difficult, the results will be well worth the effort.

How To: Fold an adorable origami Hello Kitty for beginners

For little girls, Hello Kitty is one of the first and most easy to love cartoon characters they encounter, and this is a love affair that continues the rest of their life. With multiple incarnations like the punk Hello Kitty and the summer fun (tanned) Hello Kitty, this is one pussycat that stays current with the times.

How To: Use the Solidify Selection script in Blender

In this tutorial, we'll take a look at a built-in script called the Solidify Selection script. This script, created by Campbell Barton, will allow you to solidify a mesh by adding a second "skin" to it based on the selected geometry. Whether you're new to the Blender Foundation's popular open-source 3D computer graphics application or are a seasoned digital artist merely on the lookout for new tips and tricks, you're sure to be well served by this free video software tutorial from the folks a...

How To: Unlock any T-Mobile Google G1 Android phone for free

In this tutorial, learn how to save yourself the money you'd pay someone to unlock your Google G1 phone from T-Mobile and do it yourself in just a few quick minutes. This is actually a very easy process and this clip will walk you through the process step by step so you can freely use your phone on any network and not be limited to T-Mobile. This is also helpful if you wish to give away or sell your phone to someone on a new network.

How To: Make an origami body for a person for beginners

Are you an origami fan who's just starting out in this paper folding and molding line of work? Are you tired of folding nothing but paper lucky stars and tired cranes? Well, look no further than this origami video, which immediately throws you off the deep end (just kidding) and teaches you how to make the body of a person.

How To: Get started building web apps in Adobe Flash Builder 4

Need a general introduction on how to get started creating your own Flex-based web applications in Adobe Flash Builder 4? This clip will show you what to do and introduce you to the general architecture of Flex apps. Whether you're new to Adobe's popular Flash IDE (previously titled Adobe Flex Builder) or simply wish to become better acquainted with the program, you're sure to find benefit in this free video software tutorial. For more information, including specific, step-by-step instruction...