Placing Aims Search Results

How To: Remove a boat from the water for transport & storage

Eddie shows us how to remove a boat from the water in this video tutorial. First, take down the canvases and wrap them up. Now, put the antennas down and drive the boat to the loading dock. Next you will need a large truck that has a hitch and trailer attached to it, and secure everything so the boat stays on and doesn't come off of the trailer. Take the drain plug out of the boat before you transport it, to make it lighter. Transport the boat to your house, and place bricks over the front so...

How To: Upgrade from Vista to Windows 7 with Cnet TV

In this video tutorial, viewers learn how to upgrade a computer from Windows Vista to Windows 7. Users are able to do an in-place upgrade as long as both the Windows Vista and Windows 7 versions are the same. Users will need to export all their data, erase the hard drive and then reinstall all the applications. To do an in-place upgrade, begin by backing-up your data. Then insert the install DVD and select run it. Then click on Install Now and wait for it to install and setup. This video will...

How To: Make a three string guitar out of a cigar box

This video will show viewers how to simply make a 3 string guitar using an empty cigar box, a piece of oak, some string, and a few eyebolts. You start with a 1 by 2 piece of oak which is about 3 feet long. First, you should begin by making some markings along one side of the oak, first at 1/2 an inch and then at 1/4 inch spacing after that. Drawing 3 symmetrical lines where the strings should go, drill holes at the intersections of the lines you have drawn. The holes should be made using a 1/...

How To: Tie a pole-lashing knot

Know your knots! With this free video tutorial, you'll learn how to tie a pole-lashing knot. Pole lashing knots are great for tying wood together and moving them from place to place. The knot is easy to tie provided, of course, you know how to go about making it. For an easy-to-follow, step-by-step overview of how to tie this useful fisherman's knot in a minute's time or less, watch this free video knot tyer's guide.

How To: Play a Bo Diddley beat on the ukulele

This how to video shows you how to play the Bo Diddley beat on a ukulele. You will need a tuned ukulele and basic knowledge of chords to do this. First, form a D chord. That is, place your fingers so that the first string first fret, second string first fret, third string second fret, and fourth string third fret are pressed. Use your right hand go up and down. Do not place your fingers all the way on to the fret. Only press down at the right times to create the beat. You will be making muted...

How To: Cook delicious Chinese style shrimp fried rice

In this video, we learn how to make shrimp fried rice. You will need leftover rice, shrimp, ham, onion, cilantro, red pepper, celery, garlic, green onion and frozen peas. First, take the shells off the shrimp and de-vein them. Then, chop up your vegetables and ham. Now, add water to your left over rice until it starts breaking up. Grab a walk and put it over high heat and add canola oil to the bottom. Add in your onions, peas, celery, garlic and red pepper and shallots in the wok and cook unt...

How To: Shuck a fresh oyster straight from the beach

In this video, Bill Dewey will show you the best way to shuck an oyster. You should have a knife and a glove so you will not cut yourself. Place the oyster on your glove hand. Keep the pointed side towards you. Take the knife and place it into the hinge. Twist the knife until you hear the hinge pop. Keep the knife against the top shell and scrape against the top towards the muscle. Now, open it up and cut the oyster from the bottom shell. Keep the liquor from moving off the shell. Now the oys...

How To: Truss a chicken for cooking

Leslie Green from the Hungry Housewife shows you how to truss a chicken for cooking. To begin, you need of course, a whole raw chicken. You will also need about 3 feet of twine or string. Fold the twine in half so it is even on both sides. Place the chicken on its back with its legs facing upwards toward you. Place the twine underneath the chicken, and come up around each end of the chicken legs. Tuck the chicken's wings underneath its body. Pull the twine tight, and criss cross it so it goes...

How To: Properly fold a letter and place it into an envelope

This video is about professional/business letter folding and mailing. Before starting this process your hands should be clean and dry so as not to ruin the look of the letter. To fold the letter correctly, you must take the bottom 1/3 of the letter and fold it upwards towards the letterhead - it should be folded about halfway to the top. Then crease the fold. Next you fold the top down and crease that fold also. To mail, you must place the lettehead, head down, face forward into the envelope....

How To: Take apart and fix a 6th generation iPod Classic

In this how to video, you will learn how to open a 6th generation Ipod Classic. First, make sure to turn it off and make sure the hold button is on. Take a prying tool to undo the clips inside the device by sliding it in between the cover and back. Once the clips are undone, place thumb tacks on the sides and tops while popping the base out. Be careful, as there are cables inside that you do not want to break. The orange part is the battery while the blue object is the hard drive. Once you ma...

How To: Properly fold a letter and look professional

From this video, learn a proper way to fold a letter professionally and place it an envelope. Basically take the letter and lay it in a flat surface, then find a spot in the paper which is almost a certain way up and then fold from bottom to that spot and crease it. Then fold from the top above the previous fold and then crease it so that it is a three fold letter. Make sure that the letter head is up when you place it inside the envelope. So that when a person opens the letter the letter hea...

How To: Bleed your car's cooling system (and get the air out)

The temperature control onto hot and the fan is turned off. A bleeder is loosened with a 12mm screwing object. A funnel attachment is placed onto the cooling system and the actual funnel placed ontop. A pre-mixed liquid is poured into the funnel. The bleeder valve is then tightened. Another set of liquid is poured into the funnel and some is poured into a reservoir at about 3/4. The vehicle is started and druiven a few steps back and left on, to run at about 2500 rpm until the cooling fan com...

How To: Make cheese crisps with deli-sliced provolone

In this tutorial, Karen Solomon from CHOW shows us how to make homemade cheese crisps from deli-sliced provolone cheese. All you need is a spatula, deli-sliced provolone cheese and a pan over heat! First, heat your pan over medium-high heat, grab your cheese and place it into the center of the pan. Once it's bubbly and brown around the edges you can turn it over with the spatula and cook the other side until it's golden brown as well. When finished, place onto a paper towel so the grease can ...

How To: Make Mexican style potato skins for a snack

In this video, Aida shows us how to make Mexican potato skins. First, roast some new potatoes with salt, pepper and olive oil at 425 in the middle rack. While they are roasting, grab 6 oz of Mexican chorizo and put it into a hot non-stick pan. Once the potato skins are done, scoop out the middles with a melon baller. Next, add the chorizo to the potato skins and place the potatoes onto a baking sheet. Sprinkle mozzarella cheese over them. Place them back into the oven on 425 degrees for about...

How To: Install Auto-tune in your Audacity audio program

Audacity is a very effective program when it comes to audio and top of that it is free. Download Audacity from its home page, get the newest version because only that one will work with what we need to do. Install it when done with the downloading. Now the first step to installing auto-tune is getting the Audacity VST enabler, you need to need place this right or it will not work, it needs to go into the plug-ins folder in the Audacity installation folder. Now you need to get auto-tune evo fr...

How To: Make coleslaw for you summer BBQs

In this tutorial, Caroline Artiss shows us how to make coleslaw for barbecues. You will need: half a cabbage, 3 medium carrots, 1 red onion and mayonnaise. To start, slice all of this up as finely as possible with a very sharp knife. You can also use a blender to do this if you don't want to do it by hand. Now, take your veggies and cabbage and place it into a bowl. Once you've done this, place 3 tbsp of mayonnaise, 1 spoonful of soft brown sugar and 1 spoonful of white vinegar and mix togeth...

How To: Tie a karate belt on your child (or another person)

In this how-to video, Sensei Paul Adams will teach you how to tie your belt on your karate kid. The belt will be very stiff at first, but will loosen up over the years. Take the middle of the belt and place it on their belly. Take the ends and pull them all the way around until they reach the belly again. Make sure the belt is snug the whole time. Place the right side over the left and pull that end under both layers of the belt. Once this is done, pull the left end over the right and tie a t...

How To: Wind a sewing machine bobbin right every time

Ruth demonstrates how to wind a bobbin successfully every time you attempt. Place the spool of thread on the machine and wind the thread between the two disks on the spindle (found in all machines). It is better to wind the thread twice to avoid the thread come off the spindle. This does not damage the machine in any way. Pull the thread towards the bobbin and pull it through the hole in thy bobbin inside-out. Place the threaded bobbin into the winder making sure the extra thread is on top an...

How To: Perform a math addition card trick great for kids

This video is actually about how to perform a math addition card trick. Firstly take two sets of four cards in which one of the sets consists of 2 of hearts whereas the other set consists of 3 of spades. Then take the set of 3's and place it under the 2's then once it is turned over you get four cards of 3's on the top which is placed aside and the remaining cards are of 2's. Now if you just give a shake then one of the cards of 2's turn into 3 of spades and when the shake is repeated another...

How To: Make quick and easy cornbread in your truck or car

To make quick and easy cornbread in a truck, the host only needs jiffy corn muffin mix, egg beaters instead of whole eggs, and a little bit of milk. The ingredients are combined in a bowl, then poured into a disposable baking tin. A Crockpot is used in place of a traditional oven for baking by removing the glass interior. Place the tin with the mix directly inside, and cover until baked fully. The host usually uses a small tin that will fit easily inside the Crockpot, but if only a larger one...

How To: Perform the "haunted deck" card trick

Spread out three cards for the spectators to see and memorize. Then place these selected cards back in the deck. Now place the deck in the open palm your left hand. Use the fingers of your right hand to create a magic like actions on the deck of cards. The spectators shall gulp in horror because what happens is that the cards start moving itself on your left palm. First of all the deck shall move towards the right and leave a card at the right side of your hand. Then the deck shall move itsel...

How To: Make medieval tissue-transferred candles

Cathie Filian and Steve Piacenza demonstrate the way of making medieval candles using tissue paper transfer technique. Steve asks you to first take a piece of tissue paper and a square-shaped chunky stamp. Then you should load the stamp with black pigment. Once the loading is completed, you should cut the tissue paper in square shape and place the shining side on the stamp and give a nice light press with your fingers. Then once you get the stamp image on the tissue, gently take it out and pl...

How To: Do barbell single leg squats

Michelle Trap, a Certified Personal Trainer from Gold's Gym, teaches the viewers how to do barbell leg squats. First, use the Smith machine to do the leg squats. It is beneficial because the machine holds you in place. You will also need to place a bench behind you since you will use this when you lift your legs. Rack the barbell slightly lower than your shoulder and have a slight split stance with your front food centered. With this stance, take your back legs and place it on the bench behin...

How To: Perform the "oil and water" card trick

In this short, fun and informative tutorial, Andy Field demonstrates the Oil and Water trick using four black cards and four red cards. Four cards are placed on one side of the table and the four red cards are placed on the opposite side of the table. He then mixes the cards, pulling one card from each side to make a new pile of cards with alternating colors. One red, one black, one red and so on and so forth with each of the eight cards. After letting the cards sit for just a few seconds he ...

How To: Make a dragon sushi roll

This video demonstrates how dragon sushi rolls are made. Rice is pressed onto a rectangular sushi wrapper. The wrapper is then turned upside down, and fillings are spread onto the other side of the wrapper. The roll is wrapped so that the rice is on the outside. Pieces of seafood are placed on top of the roll and it is garnished with flat strips of vegetable. The roll is covered with plastic wrap and then pressed into place. With the plastic wrap still on, it is sliced into pieces and pressed...

How To: Use the keyboard on the Apple iPhone 3G

Right out of the box, iPhone is incredibly easy to use. If you want to get the most out of every feature, you’ve come to the right place. This video tutorial straight from Apple will teach you how to use the keyboard on the Apple iPhone 3G. The iPhone redefines what a mobile phone can do.

How To: Play the block-like board game Blokus

If you like video games (not just board games) like Tetris, Puzzle Quest, Tetrisphere, Columns, Dr. Mario and Wario's Woods, you'll probably enjoy the board game Blokus. Obsessed Board Gamers takes you through this video tutorial to show you what's inside the box of Blokus and how to play it.

How To: Repair and assemble a V-Cube 6 puzzle

The V-Cube 6 puzzle is a uniquely designed and constructed skill game. V-Cube 6 is a multi-colored, multiple-layered cube, rotating smoothly on based axes. The player is required to discover a strategy to achieve uniform color sides on her or his V-Cube, but in this process, the Rubik's Cube-like puzzle may break, especially if you're in the process of speedsolving.

How To: Make no-knead ciabatta bread

In this tutorial, we learn how to make no-knead ciabatta bread. First, place 3 cups of flour into a large bowl with 1/4 tsp yeast, 3 tsp salt, and 2 c of warm water. Stir all of these ingredients together, then place a piece of foil over the bowl. Leave this in the room covered for 18 hours. After this, the dough will be bubbly and soft. Punch the dough down with your spatula, then oil a sheet pan and sprinkle it with corn meal. Then, spray your work surface with water and place plastic wrap ...

How To: Knead, rise and shape bread dough

First of all you have to be very patient while kneading dough. You need a lightly floured surface to press the dough. Use the heel of your hand to knead the roll down and away in a rolling motion. Give the dough a quarter turn then fold it over and then push it down.

How To: Fix a leak in your calgary waterfall

This video is an explanation of how to fix a leak in a backyard water feature with a pond and waterfall. If the waterfall is losing water and has to be refilled frequently, you can tell there is a leak somewhere. One place where a leak can happen is a place where the liner needs to be propped up with a rock so it won't flatten out and allow water to leak out. Another problem can occur when a rock is arranged so that water splashes over it. That problem can be fixed by rearranging the rocks to...

How To: Perform the Vortex card trick

This is a really cool visual effect card trick that is performed on two spectators. Spectator number one is asked to choose a card. The card is then placed into the deck ( halves ) and the deck is combined into one. The trick is holding the cards apart with your pinky so the chosen cards position is still visible to you. You continue to hold the break by moving your thumb into the break, you cut the bottom half, in half and place that on top. Repeat the procedure with the break half, and plac...